 | C.R. LAURENCE 39730201 Somaca/CRL 6 Diamond Flat Edge Cup 140-170 Grit for 1/8 to 1/2 Glass
Brand: C.R. Laurence Part Number: 39730201
140-170 Grit This Somaca/CRL 6" Diamond Cup Wheel will grind a flat edge profile on 1/8 to 1/2 inch (3 to 12 millimeter) glass and is designed to run on the VFE4 Cup Wheel Edger. Dimensions: 6 in (152.4 mm) | *$388.32 |
 | CRL Universal "One-Man" Movable Glass Table
Brand: C.R. Laurence Part Number: 3LTRT
Makes it Possible for One Person to Sand Large Pieces of Glass Fits Any Make Upright Belt Sander Table in Front of 2200RP Sander Shown on Picture One person can sand large pieces of glass without having to support the glass' weight by using this CRL Universal "One-Man" Movable Glass Table . It rolls on a support rail in front of the sander, so the operator controls the amount of pressure the glass applies to the belt. The table top is carpeted, and has four pop-up ball casters, allowing easy glass rotation. All sides can then be sanded without having to lift the glass. The legs are adjustable to allow use with any upright belt sander. Table Guide Rail is 156 inches (3,962 millimeters) long; Table Top is 36 by 60 inches (914 by 1,524 millimeters). | *$1,865.69 |
 | C.R. LAURENCE 41900550 CRL/Somaca Parker Gold Ring OF20C-211OACF 1/4 Port for BM106G Machine
Brand: C.R. Laurence Part Number: 41900550
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 37 Quantity Required Per Machine: 1 | *$70.14 |
 | C.R. LAURENCE 41910000 CRL/Somaca Solenoid Coil Parker Gold Ring # CFGC05 for BM106G Machine
Brand: C.R. Laurence Part Number: 41910000
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 38 Quantity Required Per Machine: 1 | *$114.69 |
 | C.R. LAURENCE 44130600 CRL/Somaca Fafnir 1103KRR With Collar for BM106G Machine
Brand: C.R. Laurence Part Number: 44130600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 21 Quantity Required Per Machine: 2 | *$105.72 |
 | C.R. LAURENCE 46202278 CRL/Somaca Replacement Smoother for 38803800 Assembly
Brand: C.R. Laurence Part Number: 46202278
Replacement Rubber Smoother for Cat. No. 38803800 Somaca/CRL SBE1 Grinding Wheels are available in 46, 60, 100, 120, 140, 170, 230, and 270 grits for glass up to 1 inch (25 millimeter) thick. | *$145.36 |
 | C.R. LAURENCE 46205880 Somaca/CRL VE 1/4 Board Dressing Plate 100 Grit
Brand: C.R. Laurence Part Number: 46205880
100 Grit Somaca/CRL VE 1/4" Board Dressing Plate is 100 Grit and measures 8 x 6 inches (203.2 x 152.4 millimeters). Grit: 100 | *$39.48 |
| Somaca/CRL VE 3/8" Board Dressing Plate 120 Grit
Brand: C.R. Laurence Part Number: 46205881
120 Grit Somaca/CRL VE 3/8" Board Dressing Plate is 120 Grit and measures 8 x 6 inches (203.2 x 152.4 millimeters). Grit: 120 | *$46.31 |
| C.R. LAURENCE 46205882 Somaca/CRL VE 1/2 Board Dressing Plate 100 Grit
Brand: C.R. Laurence Part Number: 46205882
100 Grit Somaca/CRL VE4 1/2" Board Dressing Plate is 100 Grit and measures 8 x 6 inches (203.2 x 152.4 millimeters). Grit: 100 | *$56.55 |
| C.R. LAURENCE 46205883 Somaca/CRL VE 3/4 Board Dressing Plate 120 Grit
Brand: C.R. Laurence Part Number: 46205883
120 Grit Somaca/CRL VE 3/4" Board Dressing Plate is 120 Grit and measures 8 x 6 inches (203.2 x 152.4 millimeters). Grit: 120 | *$65.81 |
 | C.R. LAURENCE 46207216 CRL/Somaca Replacement Felt Ring for 39415200
Brand: C.R. Laurence Part Number: 46207216
Replacement Felt Ring for 39415200 Assembly Somaca/CRL Replacement Felt Ring is available for position #6 felt narrow face bevel polisher assembly #39415200. Diameter: 6 in (152 mm) | *$67.28 |
 | C.R. LAURENCE 47001710 Somaca/CRL Small Parts Table for Rotary Sealing Table
Brand: C.R. Laurence Part Number: 47001710
Ideal for Working on Small I.G. Units The small parts table adapter is a metal plate that fits over the two suction cups on top of Cat. No. 470017000 Rotary Sealing Table. It has a pedestal mounted single suction cup that can be used to hold small IG units for sealing. It rotates with the main table so the operator can stay in one place while working on small pieces. | *$653.13 |
 | C.R. LAURENCE 6105GL CRL One Gallon Glas-Grind
Brand: C.R. Laurence Part Number: 6105GL
Excellent Quality Coolant for Glass Drilling, Sawing or Beveling This CRL GlassGrind Coolant is developed to provide excellent results for edging, beveling, drilling, sawing and other abrasive working of glass. Specifically designed for the glass industry, GlassGrind will not harden in the bottom of tanks like other coolants. | *$198.00 |
 | C.R. LAURENCE AFCB1 CRL Air Float Chamber With Ball for Cutting Tables
Brand: C.R. Laurence Part Number: AFCB1
Replaces Worn or Damaged Units Replace your worn or damaged ball float units on your cutting table with the CRL Air Float Chamber with Ball . This unit is an OEM part for all CRL air flotation systems. | *$75.46 |
 | C.R. LAURENCE BM64B CRL/Somaca 4 x 64 Upright Belt Machine
Brand: C.R. Laurence Part Number: BM64B
Portable Wet Abrasive Belt Model for Rough Grinding, Smoothing and Polishing Edges of Glass This bench type machine with its streamline styling, rugged construction and low price is ideal for glass fabricators who have only a limited need for edgework capacity. Also, it can be carried on a truck, or to the job site if electricity is available. Machine is designed for use with standard 4 x 64 inch (101.6 x 1625.6 millimeters) abrasive belts. One 120 grit belt is furnished with each unit. The machine is equipped with a 1/2HP, single phase, 1725 rpm motor with a cord and on/off switch. The drive shaft is V-belt powered, and revolves in two ball bearing pillow block units. The eccentric type belt tensioner has a convenient locking handle and a control knob for easy tightening and tracking. Water for wet grinding sprays on the back of the belt from a built-in tank. One pair of safety glasses and a respirator are furnished with each machine. Height: 36 in (914 mm) Depth: 24 in (610 mm) Width: 16 in (406 mm) | *$2,099.51 |
 | C.R. LAURENCE BP2001 CRL Bar Platen for the 2200 and 2200RP
Brand: C.R. Laurence Part Number: BP2001
Fits Behind Belt Gives Glass a Slightly Rounded Edge This CRL Bar Platen is used behind the belt to give glass a slightly rounded edge. Must be inserted into PA100 Platen Adapter located on your Upright Belt Sander . | *$186.43 |
 | CRL 14" x 5/8" Replacement Grinding Wheel
Brand: C.R. Laurence Part Number: BW14
Used on CRL Finger Pull Machines The CRL Finger Pull Machine uses this Replacement Grinding Wheel for cutting grooves in glass. Easily replaced with simple hand tools. Can be used on either the FP1 or the old style FP514 Finger Pull Machine. | *$153.38 |
 | C.R. LAURENCE CM8 CRL Crystal Masterâ„¢ 8
Brand: C.R. Laurence Part Number: CM8
Use For Grinding or Beveling Simple Operation This CRL Crystal Masterâ„¢ 8 Grinder/Polisher features an eight inch (203 millimeter) diameter working surface for fast accurate results on a variety of glass objects and shapes. Variable speed control 0-2000 rpm (grind fast, polish slow). Accepts either 1/2 inch (12.7 millimeter) arbor hole, or 1/4-20 thread screwback mounted discs or laps. 1/4 horsepower motor running at 115 VAC. Use with CRL Standardâ„¢ Diamond Grinding Discs . Additional Product Notes: Adjustable coolant delivery system comes complete with a submersible pump. Coolant delivery system sold separately. | *$917.16 |
 | C.R. LAURENCE CN0004 CRL 115 Volt Solenoid for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0004
Easy to Replace Designed for the GL4W/CN4106 Sanders This CRL 115 Volt Solenoid is designed to fit the GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. Safety Note: Always unplug sander before attempting to replace any parts. | *$204.99 |
 | C.R. LAURENCE CN0006 CRL Water Spray Valve for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0006
Easy to Replace Designed for the CRL GL4W/CN4106 Sanders This CRL Spray Valve is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part for older or clogged valves. Always unplug sander before attempting to replace any parts. | *$32.83 |
 | C.R. LAURENCE CN0012 CRL 115 Volt Motor for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0012
Designed to Fit the CRL GL4W/CN4106 Sanders This CRL 115 Volt Motor is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. The heavy-duty, 1 HP motor runs at 3450 RPM and can be wired for 230 Volts by a qualified electrician. It carries a one year warranty. Safety Note: Always unplug sander before attempting to replace any parts. | *$555.45 |
 | C.R. LAURENCE CN0017 CRL Top Wheel Bracket for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0017
Designed for CRL GL4W/CN4106 Sanders This CRL Top Wheel Bracket is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$223.86 |
 | CRL 3" Front Rest Roller for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0025
Front Rest Roller Designed for CRL GL4W/CN4106 Sanders This CRL 3" Front Rest Roller is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools | *$16.46 |
 | C.R. LAURENCE CN0026 CRL Front Rest Roller Axle for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0026
Designed for CRL GL4W/CN4106 Sanders This CRL Front Rest Roller Axle is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$18.97 |
 | C.R. LAURENCE CN0027 CRL Front Rest Roller Bar for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0027
Designed for CRL GL4W/CN4106 Sanders This CRL Front Rest Roller Bar is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$57.65 |
 | C.R. LAURENCE CN0034 CRL Upper Pulley With Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0034
Balanced Steel Pulley Designed for CRL GL4W/CN4106 Sanders This CRL Upper Pulley with Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. The 5-1/4 inch (133 millimeter) steel pulley comes complete with bearing. It can easily be replaced with common hand tools. | *$267.15 |
 | C.R. LAURENCE CN0035 CRL Top Pulley Shaft and Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0035
Designed for CRL GL4W/CN4106 Sanders This CRL Top Pulley Shaft and Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools | *$106.52 |
 | C.R. LAURENCE CN0036 CRL Roller Platen for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0036
Designed for CRL GL4W/CN4106 Sanders This CRL Roller Platen is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$501.20 |
 | C.R. LAURENCE CN0037 CRL Roller Platen Shaft Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0037
Sealed Ball Bearings Designed for CRL GL4W/CN4106 Sanders This CRL Roller Platen Shaft Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$103.57 |
 | C.R. LAURENCE CN0038 CRL Bottom Bracket and Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0038
Designed for CRL GL4W/CN4106 Sanders This CRL Bottom Bracket and Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$159.88 |
 | C.R. LAURENCE CN0039 CRL Lower Pulley for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0039
Designed for CRL GL4W/CN4106 Sanders This CRL Lower Pulley is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$214.41 |
 | C.R. LAURENCE CN0040 CRL Bottom Bracket Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0040
Designed for CRL GL4W/CN4106 Sanders This CRL Bottom Bracket Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$114.42 |
 | C.R. LAURENCE CPT10X12 CRL 10 x 12 Glass Cutting Table Carpet
Brand: C.R. Laurence Part Number: CPT10X12
Special Long Wearing High Density Material Black Color Allows You to See Small Glass Fragments Easily Abrasive Resistant This CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. Designate with or without Breaker Bar when ordering. | *$442.38 |
| C.R. LAURENCE CPT10X12BB CRL 10 x 12 Carpet Only for Glass Cutting Table With Break Bar
Brand: C.R. Laurence Part Number: CPT10X12BB
Two Pieces Made Exclusively for Tables With Break Bars Special Long Wearing High Density Material This CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. Actual Carpet Size w/Breaker Bar: Actual Carpet Size w/Breaker Bar:2 pieces 77 x 144 in (1956 x 3658 mm) For Table Size: 10 ft x 12 ft (3050 mm x 3660 mm) Color: Black | *$450.40 |
| C.R. LAURENCE CPT6X8 CRL 6 x 8 Glass Cutting Table Carpet
Brand: C.R. Laurence Part Number: CPT6X8
Special Long Wearing High Density Material Black Color Allows You to See Small Glass Fragments Easily Abrasive Resistant THIS CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. | *$285.05 |
| C.R. LAURENCE CPT8X10 CRL 8 x 10 Glass Cutting Table Carpet
Brand: C.R. Laurence Part Number: CPT8X10
Special Long Wearing High Density Material Black Color Allows You to See Small Glass Fragments Easily Abrasive Resistant THIS CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. | *$394.23 |
 | C.R. LAURENCE CPT8X10BB CRL 8 x 10 Carpet Only for Glass Cutting Table With Break Bar
Brand: C.R. Laurence Part Number: CPT8X10BB
Two Pieces Made Exclusively for Tables With Break Bars Special Long Wearing High Density Material This CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. Actual Carpet Size w/Breaker Bar: Actual Carpet Size w/Breaker Bar:2 pieces 77 x 144 in (1956 x 3658 mm) For Table Size: 8 ft x 10 ft (2438 mm x 3048 mm) Color: Black | *$391.17 |
| C.R. LAURENCE CPT8X12 CRL 8 x 12 Glass Cutting Table Carpet
Brand: C.R. Laurence Part Number: CPT8X12
Special Long Wearing High Density Material Black Color Allows You to See Small Glass Fragments Easily Abrasive Resistant THIS CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. Designate with or without Breaker Bar when ordering. | *$482.74 |
| C.R. LAURENCE CPT8X12BB CRL 8 x 12 Carpet Only for Glass Cutting Table With Break Bar
Brand: C.R. Laurence Part Number: CPT8X12BB
Two Pieces Made Exclusively for Tables With Break Bars Special Long Wearing High Density Material This CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. Actual Carpet Size w/Breaker Bar: Actual Carpet Size w/Breaker Bar:2 pieces 77 x 144 in (1956 x 3658 mm) For Table Size: 8 ft x 12 ft (2438 mm x 3660 mm) Color: Black | *$464.78 |
| C.R. LAURENCE CPT9X12 CRL 9 x 12 Glass Cutting Table Carpet
Brand: C.R. Laurence Part Number: CPT9X12
Special Long Wearing High Density Material Black Color Allows You to See Small Glass Fragments Easily Abrasive Resistant THIS CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. Designate with or without Breaker Bar when ordering. | *$452.20 |
| C.R. LAURENCE CPT9X12BB CRL 9 x 12 Carpet Only for Glass Cutting Table With Break Bar
Brand: C.R. Laurence Part Number: CPT9X12BB
Two Pieces Made Exclusively for Tables With Break Bars Special Long Wearing High Density Material This CRL Glass Cutting Table Carpet is precut to fit your table. There is sufficient extra material to allow the carpet to be wrapped around the table's edge and secured. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. Actual Carpet Size w/Breaker Bar: Actual Carpet Size w/Breaker Bar:2 pieces 77 x 144 in (1956 x 3658 mm) For Table Size: 9 ft x 12 ft (2743 mm x 3660 mm) Color: Black | *$445.43 |
| C.R. LAURENCE CPTL1N CRL 12 Foot Wide Glass Cutting Table Carpet Cut to Length
Brand: C.R. Laurence Part Number: CPTL1N
12' Wide Carpet Can be Ordered in Any Length Special Long Wearing High Density Material Black Color Allows You to See Small Glass Fragments Easily This CRL 12 Foot Wide Glass Cutting Table Carpet is cut to the length you need from bulk rolls. Viewing score lines and detecting glass chips to avoid scratching lites of glass is easy because of it's black color. This is not indoor/outdoor carpet, it is specifically made for high use wear and the high density gives you the perfect cushioning effect needed for scoring and break out. | *$36.28 |
 | C.R. LAURENCE CRP2000 CRL Roller Platen Fits All CRL Belt Sanders
Brand: C.R. Laurence Part Number: CRP2000
Fits All CRL Belt Sanders This CRL Roller Platen is the complete roller-bearing-shaft unit used on all CRL Belt Sanders accepting a one inch (25.4 millimeter) platen shaft. Replacement bearings are also available individually. Reduces belt wear by minimizing friction between belt and platen. | *$427.19 |
 | C.R. LAURENCE CRP6 CRL Front Rest Replacement Roller for the 200 Sander
Brand: C.R. Laurence Part Number: CRP6
Used on the No. 200 Sander This CRL Front Rest Replacement Roller is used on the Model 200 Sander. The front rest roller and axle with grease fitting supports glass during sanding. Roller and axle may also be used on some Somaca sanders. | *$16.78 |
 | C.R. LAURENCE CRP7 CRL Axle for the CRP6 Roller
Brand: C.R. Laurence Part Number: CRP7
Used on the No. 200 Sander This CRL Axle for the Front Rest Replacement Roller is used on the Model 200 Sander. The front rest roller and axle with grease fitting supports glass during sanding. Roller and axle may also be used on some Somaca sanders. | *$14.50 |
 | C.R. LAURENCE DMC55GL CRL 55 Gallon Diamond Machine Coolant
Brand: C.R. Laurence Part Number: DMC55GL
High Performance Lubricant for Glass Edging and Beveling Machines Extends Tool Life Water Based CRL Diamond Machine Coolant is a high-performance, cost effective lubricant that is highly concentrated. The concentation on this product is usually between 50:1 to 100:1. With addition at tank side or by automated metering equipment, this product accomodates grinding bevels of up to two inches (50.8 millimeters). CRL DMC55 is considered a heavy duty lubricant that can even extend the life of the sump. It is designed with long-lasting microbiological protection suited for heavy use situations experienced in even the largest of glass facilities. It also reduces the development of "popcorn" particles during grinding to keep the lines clear. CRL DMC55 is manufactured with the environment in mind, using a water-based formulation containing absolutely no oil. It is also pH-controlled at moderate levels to facilitate operator handling. | *$971.46 |
 | C.R. LAURENCE DMC5GL CRL 5 Gallon Diamond Machine Coolant
Brand: C.R. Laurence Part Number: DMC5GL
High Performance Lubricant for Glass Edging and Beveling Machines Extends Tool Life Water Based CRL Diamond Machine Coolant is a high-performance, cost effective lubricant that is highly concentrated. The concentation on this product is usually between 50:1 to 100:1. With addition at tank side or by automated metering equipment, this product accomodates grinding bevels of up to two inches (50.8 millimeters). CRL DMC55 is considered a heavy duty lubricant that can even extend the life of the sump. It is designed with long-lasting microbiological protection suited for heavy use situations experienced in even the largest of glass facilities. It also reduces the development of "popcorn" particles during grinding to keep the lines clear. CRL DMC55 is manufactured with the environment in mind, using a water-based formulation containing absolutely no oil. It is also pH-controlled at moderate levels to facilitate operator handling. | *$137.99 |
 | CRL 62" Replacement Diamond Coated Blade - DTB5000
Brand: C.R. Laurence Part Number: DTB101
For CRL Diamond Laser Band Saw This CRL Diamond Coated Replacement Blade is designed for use on the CRL DTB5000 Diamond Laser Band Saw . | *$193.16 |
 | C.R. LAURENCE DTB201 CRL 36 Replacement Diamond Coated Band Saw Blade for the DTB1000
Brand: C.R. Laurence Part Number: DTB201
For the CRL Diamond Band Saw This CRL Diamond Coated Replacement Blade is designed for use with the CRL DTB1000 Diamond Band Saw . | *$133.83 |
 | C.R. LAURENCE DTB3000 CRL Diamond Band Saw
Brand: C.R. Laurence Part Number: DTB3000
Precision Diamond Blade for Glass, Ceramic Tile and Craft Materials A Favorite of Stained Glass Hobbyists The CRL Diamond Band Saw can clean-cut virtually any glass shape, including curves with a radius as small as 1/4 inch (6.4 millimeter). The 36 inch (914.4 millimeter) precision blade is bathed continuously in coolant to prolong life and prevent dust, all the while producing a clean-cut edge that requires little or no finishing. Also cuts tile, ceramics and other brittle craft items. You can stack identical shapes and cut multiple pieces simultaneously. Quiet 110V AC motor has a variable speed (0-2,800 rpm) control, and saw housing is made of rugged aluminum and stainless steel. Max. Glass Thickness: 1/2 in (12.7 mm) Min. Cutting Radius: 1/4 in (6.4 mm) Max. Cutting Radius: 5 in (127 mm) Minimum Order: 1 Each Specifications: Minimum Radius: 1/4 Inch (6.4 millimeter) Maximum Radius: Five Inches (127 millimeters) Cutting Speed: Approximately 26" inches per minute | *$690.44 |
