 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 3/16", OD.0.52", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.0", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.13 Lbs., Box Package | *$4.02 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 1.50" min. Size, 1.64" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$6.86 |
 | JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18"
Brand: IWS
JIC 37 Degree Reusable Hydraulic Female Swivel Coupling, Thread Size 9/16-18", Hose ID 1/4", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case | *$13.53 |
 | Air Brake Hose Assembly 3/8" NPT 1/2" ID 48" Long
Brand: IWS
Airbrake Assembly Hose 3/8" NPT 1/2" ID 48" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$14.91 |
 | Push-To-Connect Air Brake Fittings, Bulkhead Union, Pipe Size 1/2"
Brand: IWS
Push-To-Connect Air Brake Fittings, Bulkhead Union, 1/2" x 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$31.76 |
 | Reusable Hydraulic Male, 90 Deg. Elbow, Thread Size 7/16-24"
Brand: IWS
Reusable Hydraulic Male, 90 Deg. Elbow, Thread Size 7/16-24"Hose ID 3/16", Drop Length 1.69"0.39", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$15.69 |
 | Carbon Steel Gear Clamps, Nominal Size 4"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 4", Min. Size 2.50", Max. Size 4.50", Pack of 10 | *$1.27 |
 | Air Brake Compression Female NPT Connector, 3/8" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression Female NPT Connector, 3/8" Pipe Size, 3/8" tube size | *$4.71 |
 | Heavy Duty Bolt Clamp, 150 mm to 162 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 150 mm to 162 mm, Pack of 10 | *$16.08 |
| | Air Brake Compression Insert, 3/8" tube size
Brand: IWS
Air Brake Compression Insert, 3/8" tube size, | *$0.48 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 5/8" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 5/8", OD.1.08", Working Pressure 1500 PSI, Min. Burst Pressure 6000 PSI, Min. Bend Radius 6.5", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.40 Lbs., Reel Package | *$7.45 |
| Carbon Steel Gear Clamps, Nominal Size 6"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 6", Min. Size 4.50", Max. Size 6.50", Pack of 10 | *$1.47 |
| | Reusable Male NPT Teflon Fitting, Thread Size 3/8-18"
Brand: IWS
Reusable Male NPT Teflon Fitting, Thread Size 3/8-18", Hose ID 5/16" | *$15.69 |
 | SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 24"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size JIC-12, Length 24" | *$87.35 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-14"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-14"Hose ID 5/8", Drop Length 3.73"Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$41.38 |
| Heavy Duty Bolt Clamp, 73 mm to 79 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 73 mm to 79 mm, Pack of 10 | *$8.92 |
 | Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 3/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 3/8", Hose Size 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$16.86 |
 | Rubber Cushioned Support Clamp
Brand: IWS
Rubber Cushioned Support Clamp, Strap Width 1/2", ID1", Bolt hole measures 0.256", Galvanized Steel, Fitted With Rubber Liner, Pack of 10 | *$0.78 |
 | Air Brake Plain Nut, 3/8" Hose ID
Brand: IWS
Air Brake Plain Nut, 3/8" Hose ID | *$2.25 |
 | Air Brake Compression Male NPT Connector, 3/8" tube size to 1/2" tube size
Brand: IWS
Air Brake Compression Male NPT Connector, 3/8" tube size to 1/2" tube size | *$4.60 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 19-1/2"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 19-1/2", Min. Size 18.00", Max. Size 20.00", Pack of 12 | *$6.27 |
 | Reusable Male Inverted Flare 45 Deg. Elbow Teflon Fitting, Thread Size 1/2-20"
Brand: IWS
Reusable Male Inverted Flare 45 Degree Elbow Teflon Fitting, Thread Size 1/2-20", Hose ID 1/4", Cut-Off Length 0.96" | *$17.06 |
 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/4-18", Hose ID 1/4", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 1 Per Case | *$5.49 |
 | Ground Plug Drain Valve, 3?8"
Brand: IWS
Ground Plug Drain Valve, Pipe size 3?8" NPT | *$14.51 |
 | Silicone Heater Hose
Brand: IWS
Silicone Heater Hose, 3/4" ID | *$7.55 |
 | Reusable Male Inverted Flare, Teflon, Thread Size 1/2-20"
Brand: IWS
Reusable Male Inverted Flare, Teflon, Thread Size 1/2-20", Hose ID 1/4" | *$19.22 |
| | gear Clamps
Brand: IWS
Micro Carbon Steel Gear Clamp, 2-1/4" Nominal Size, 2.06" Min Size, 2.75" Max Size, 10 Per Case | *$1.27 |
| Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, 45 Deg. Male Elbow, Pipe Size 1/8", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$9.22 |
 | Reusable Female SAE 90 Deg. Swivel Teflon Reusable Fitting, Thread Size 3/4-16"
Brand: IWS
Reusable Female SAE 90 Deg. Swivel Teflon Reusable Fitting, Thread Size 3/4-16", Hose ID 13/32", Drop Length 1.09" | *$26.38 |
| Rubber Cushioned Support Clamp
Brand: IWS
Heavy Duty Support Clamp, Block Size 3, Hole Size 0.54" (13.7 mm), Designd to Fit Nominal pipe size 1/4" OD, Constructed of: Steel Weld Plate as a Base, Two Polypropylene Clamp Halves, And a Steel Cover Plate, Bolted Together With Hex Bolts | *$1.67 |
 | Air Brake Spring Guard Nut, 3/8" hose ID
Brand: IWS
Air Brake Spring Guard Nut, 3/8" hose ID | *$2.16 |
 | SAE 100R5 High Temperature Hydraulic Hose, ID. 13/32"
Brand: IWS
SAE 100R5 High Temperature Hydraulic Hose, ID. 13/32", OD.0.77", Working Pressure 2000 PSI, Min. Burst Pressure 8000 PSI, Min. Bend Radius 4.6", Tube- Seamless oil resistant CPE rubber , Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -49° to 150°C (-55° to 302°F), air to 120°C (248°F), 0.26 Lbs., 25 Ft. Per Box | *$13.24 |
| SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 48"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 48" | *$73.73 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 1/4" ID, Pack of 10 | *$2.35 |
| Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1-1/2-11-1/2
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1-1/2-11-1/2", Hose ID 1-3/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 1 Per Case | *$54.11 |
| | Air Brake Compression Sleeve, 3/8" Tube size
Brand: IWS
Air Brake Compression Sleeve, 3/8" Tube size | *$0.30 |
| Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/8-27
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 1/8-27", Hose ID 3/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 10 Per Case | *$6.57 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/4" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/4", OD.0.58", Working Pressure 3000 PSI, Min. Burst Pressure 12000 PSI, Min. Bend Radius 3.4", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.18 Lbs., Box Package | *$4.22 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 2.75" min. Size, 3.06" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.35 |
 | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 1-1/4" Nominal Size, 1.13" Min Size, 1.63" Max Size, 10 Per Case | *$1.47 |
 | Spring Loaded T-Bolt Clamp
Brand: IWS
Spring Loaded T-Bolt Clamp, Min. Size 2.38" Max. Size 2.69", Made From Plated Ductile Iron | *$7.16 |
| Stainless Steel 300 Gear Clamps, Nominal Size 1-1/2"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 1-1/2", Min. Size 1.06", Max. Size 2.00", Pack of 10 | *$1.13 |
 | Push-To-Connect Air Brake Fittings, Male, Pipe Size 3/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, Male, Pipe Size 3/8", Hose Size 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$6.96 |
 | Reusable Hydraulic JIC 37 Deg. Female, 45 Deg. Elbow, Thread Size 1·1/16-12"
Brand: IWS
Reusable Hydraulic JIC 37 Deg. Female, 45 Deg. Elbow, Thread Size 1·1/16-12", Hose ID 5/8", Drop Length 1.77"0.78", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$42.75 |
 | Ring Style Turbo-Sleeve
Brand: IWS
Ring Style Turbo-Sleeve, 4" ID, 6'' Long | *$33.43 |
 | Reusable Hydraulic JIC 37 Degree Male Coupling, Thread Size 7/8-14"
Brand: IWS
Reusable Hydraulic JIC 37 Degree Male Coupling, Thread Size 7/8-14", Hose ID 1/2", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$24.02 |
| Stainless Steel 300 Gear Clamps, Nominal Size 11-3/4"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 11-3/4", Min. Size 2.25", Max. Size 12.25", Pack of 10 | *$4.22 |
| | Replacement Brass Sleeve,Hose ID 3/16"
Brand: IWS
Replacement Brass Sleeve,Hose ID 3/16" | *$2.84 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-14"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 1·1/16-14"Hose ID 5/8", Drop Length 1.82", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$41.08 |
| SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/2" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/2", OD.0.92", Working Pressure 1750 PSI, Min. Burst Pressure 7000 PSI, Min. Bend Radius 5.5", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.38 Lbs., Box Package | *$6.38 |
|
