 | Heavy Duty Bolt Clamp, 140 mm to 150 mm
Brand: IWS
Heavy Duty Bolt Clamp, 430 stainless steel, adjusting Range 140 mm to 150 mm, Pack of 10 | *$15.78 |
 | Air Brake Compression 45° Male NPT Connector, 1/4" Pipe Size, 1/4" tube size
Brand: IWS
Air Brake Compression 45° Male NPT Connector, 1/4" Pipe Size, 1/4" tube size | *$5.58 |
 | SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 3/4-16
Brand: IWS
SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 3/4-16", Hose ID 5/16" | *$20.78 |
| | Replacement Brass Sleeve,Hose ID 5/8"
Brand: IWS
Replacement Brass Sleeve,Hose ID 5/8" | *$5.78 |
 | Stainless Steel 300 Gear Clamps, Nominal Size 5/8"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 5/8", Min. Size 0.56", Max. Size 1.06", Pack of 10 | *$1.08 |
 | Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 2.13" min. Size, 2.38" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$7.06 |
 | Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 3/8"
Brand: IWS
Push-To-Connect Air Brake Fittings,Swivel Male Branch Tee,Pipe Size 3/8", Hose Size 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$18.33 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Male Elbow, Pipe Size 3/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, 90 Deg. Male Elbow, Pipe Size 3/8", Hose Size 1/2", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$11.38 |
 | Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/4-14
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/4-14Hose ID 7/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case | *$21.38 |
| | Reusable Male NPT Teflon Fitting, Thread Size 3/4-14"
Brand: IWS
Reusable Male NPT Teflon Fitting, Thread Size 3/4-14", Hose ID 5/8" | *$23.63 |
 | Air Brake Compression Male NPT Run Tee, 3/8" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression Male NPT Run Tee, 3/8" Pipe Size, 1/2" tube size | *$10.89 |
| | Air Brake Compression Nut, 1/2" Tube size
Brand: IWS
Air Brake Compression Nut, 1/2" Tube size | *$1.67 |
| Push-To-Connect Air Brake Fittings, 90 Deg. Male Elbow, Pipe Size 1/4"
Brand: IWS
Push-To-Connect Air Brake Fittings, 90 Deg. Male Elbow, Pipe Size 1/4", Hose Size 1/4", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$5.89 |
 | Air Brake Compression Male NPT Branch Tee, 1/2" Pipe Size, 1/2" tube size
Brand: IWS
Air Brake Compression Male NPT Branch Tee, 1/2" Pipe Size, 1/2" tube size | *$13.33 |
| SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 7/8-14
Brand: IWS
SAE Reusable Hydraulic Female Swivel Couplings, Thread Size 7/8-14", Hose ID 1/2", 5 Per case | *$17.45 |
 | Reusable Male Inverted Flare 90 Deg. Teflon Reusable FittingThread Size 7/16-24"
Brand: IWS
Reusable Male Inverted Flare 90 Degree Teflon Reusable FittingThread Size 7/16-24", Hose ID 3/16", Drop Length 1.69" | *$21.76 |
| Stainless Steel 300 Gear Clamps, Nominal Size 12-1/2"
Brand: IWS
Stainless Steel 300 Gear Clamps, Band Width 1/2", Nominal Size 12-1/2", Min. Size 11.00", Max. Size 13.00", Pack of 10 | *$4.31 |
 | Male NPT Fitting With Spring, 3/8" Pipe Size, 1/2" Hose ID
Brand: IWS
Male NPT Fitting With Spring, 3/8" Pipe Size, 1/2" Hose ID | *$17.94 |
 | SAE Stainless-Steel Braided Teflon Hose Hose ID 7/8"
Brand: IWS
SAE Stainless-Steel Braided Teflon Hose Hose ID 7/8" | *$16.86 |
 | Air Brake Compression 90° Male NPT Connector, 1/4" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 1/4" Pipe Size, 3/8" tube size | *$3.63 |
 | Reusable Hydraulic SAE Female 45 Degree Elbow Coupling, Thread Size 5/8-18
Brand: IWS
Reusable Hydraulic SAE Female 45 Degree Elbow Coupling, Thread Size 5/8-18", Hose ID 5/16", Drop Length 0.39", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Case | *$23.53 |
 | SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/2" OD.
Brand: IWS
SAE 100R5 Fabric-Cover Hydraulic Hose, ID. 1/2", OD.0.92", Working Pressure 1750 PSI, Min. Burst Pressure 7000 PSI, Min. Bend Radius 5.5", Tube- Seamless oil resistant nitrile rubber, Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -40° to 125°C (-40° to 257°F), air to 70°C (158°F), 0.38 Lbs., Reel Package | *$6.38 |
| | Air Brake Compression Insert, 5/8" tube size
Brand: IWS
Air Brake Compression Insert, 5/8" tube size, | *$1.27 |
 | Air Brake Compression Male NPT Connector, 3/8" tube size to 5/8" tube size
Brand: IWS
Air Brake Compression Male NPT Connector, 3/8" tube size to 5/8" tube size | *$7.94 |
 | Air Brake Compression Union, 3/8" tube size
Brand: IWS
Air Brake Compression Union, 3/8" tube size | *$4.11 |
| | Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1-1/16-14"
Brand: IWS
Reusable Female, 45 Deg. Swivel, Teflon, Thread Size 1·1/16-14", Hose ID 5/8" | *$34.80 |
 | Reusable Hydraulic SAE 45 Degree Male Coupling, Thread Size 7/16-20
Brand: IWS
Reusable Hydraulic SAE 45 Degree Male Coupling, Thread Size 7/16-20", Hose ID 3/16", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 1 Per Pack | *$8.43 |
 | Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 23/4" ID, Pack of 33 | *$6.18 |
 | Push-To-Connect Air Brake Fittings, Female, Pipe Size 1/8"
Brand: IWS
Push-To-Connect Air Brake Fittings, Female, Pipe Size 1/8", Hose Size 1/4", D.O.T. accepted for all air brake applications | *$7.35 |
 | Push-To-Connect Air Brake Fittings, Union 3/8
Brand: IWS
Push-To-Connect Air Brake Fittings, Union, Hose Size 3/8" x 3/8", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$8.33 |
 | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 2-1/4" Nominal Size, 1.81" Min Size, 2.75" Max Size, 10 Per Case | *$1.67 |
 | SAE Stainless-Steel Braided Teflon Hose Hose ID 5/16"
Brand: IWS
SAE Stainless-Steel Braided Teflon Hose Hose ID 5/16", Hose OD 0.44", Working Pressure 2500, Min. Burst Pressure 10000 PSI, Min Bend Radius 4.0", Extruded Teflon, Reinforcement: One high-tensile Type 304 stainless steel wire braid, Temperature Range: -54° to 232°C (-65° to 450°F), Intermittent -73° to 260°C (-100° to 500°F)0.11 Lbs. Per Ft. | *$5.69 |
 | Carbon Steel Gear Clamps, Nominal Size 1-1/4"
Brand: IWS
Carbon Steel Gear Clamps, Band Width 1/2", Nominal Size 1-1/4", Min. Size 0.75", Max. Size 1.75", Pack of 10 | *$0.85 |
 | SAE 100R5 High Temperature Hydraulic Hose, ID. 5/8"
Brand: IWS
SAE 100R5 High Temperature Hydraulic Hose, ID. 5/8", OD.1.08", Working Pressure 1500 PSI, Min. Burst Pressure 6000 PSI, Min. Bend Radius 6.5", Tube- Seamless oil resistant CPE rubber , Reinforcement- One steel wire braid, Recommended Coupling Series -3500, Temp. range -49° to 150°C (-55° to 302°F), air to 120°C (248°F), 0.46 Lbs., 25 Ft. Per Box | *$22.06 |
 | Silicone Coolant Hose, 23/4"
Brand: IWS
Silicone Coolant Hose, 2-3/4" ID x 3.12" OD, Working Pressure 30 PSI, 4 Feet Per Case | *$38.82 |
| Air Brake Compression 45° Male NPT Connector, 3/8" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 45° Male NPT Connector, 3/8" Pipe Size, 3/8" tube size | *$8.04 |
| Air Brake Compression Male NPT Run Tee, 1/4" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression Male NPT Run Tee, 1/4" Pipe Size, 3/8" tube size | *$6.76 |
| | Extended Tang Silicone Hose Gear Clamp
Brand: IWS
Extended Tang (Silicone Hose) Gear Clamp, 3/8" Nominal Size, 0.56" Min Size, 0.88" Max Size, 10 Per Case | *$1.18 |
| Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/4-14
Brand: IWS
Reusable Hydraulic NPTF Male Swivel Coupling, Thread Size 3/4-14", Hose ID 5/8", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, , 5 Per Case | *$20.89 |
 | Spring Loaded T-Bolt Clamp
Brand: IWS
Spring Loaded T-Bolt Clamp, Min. Size 4.13" Max. Size 4.44", Made From Plated Ductile Iron | *$7.35 |
| Air Brake Compression 90° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size
Brand: IWS
Air Brake Compression 90° Male NPT Connector, 1/2" Pipe Size, 3/8" tube size | *$6.27 |
 | Push-To-Connect Air Brake Fittings, 90 Deg. Union,5/32"
Brand: IWS
Push-To-Connect Air Brake Fittings, 90 Deg. Union, 5/32" x 5/32", D.O.T. accepted for all air brake applications, NPT thread sealant pre-applied for convenience and further time savings. | *$7.25 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 1.63" min. Size, 1.88" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$6.86 |
| Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 7/16" ID, Pack of 12 | *$2.35 |
 | Ground Plug Valve, Female1?8"
Brand: IWS
Ground Plug Valve, Female, Pipe Size1?8" NPT | *$16.86 |
 | Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 7/8-14"
Brand: IWS
Reusable Hydraulic SAE 45 Deg. Female, 90 Deg. Elbow, Thread Size 7/8-14", Hose ID 1/2", Drop Length 1.23", Fit SAE 100R5 dimensions hoses and are common on large vehicles and equipment in North America, 5 Per Pack | *$38.24 |
| Support Clamp
Brand: IWS
Support Clamps, Strap Width 3/4", Bolt Hole 13/32", Galvanized Steel Dipped in Vinyl, 5/8" ID, Pack of 15 | *$1.08 |
 | Air Brake Compression Union Tee, 3/4" tube size
Brand: IWS
Air Brake Compression Union Tee, 3/4" tube size, | *$52.45 |
| SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 24"
Brand: IWS
SAE Stainless-Steel Braided Teflon Compressor Discharge Hose Thread Size SAE-10, Length 24" | *$54.42 |
| Heavy Duty Kodiak® Stainless Steel Bolt Clamps
Brand: IWS
Kodiak® Stainless Steel 300, Band Width 3/4" x 0.025 Thick T-Bolt Clamp, 6.00" min. Size, 6.31" max. size, The Stainless 302 Bolt is Fasted By a Type 304 Nylon Inserted Locknut, The Locknut Is Rated to 120° C (248° F), Max. Tightening Torqu 50 Lbs. Per Inch | *$8.04 |
|
