 | Prince SP20 Series Hydraulic Gear Pump - 1.22 Cu. In., CW, Model# SP20B20A9H4-R
Brand: Prince
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A. | *$219.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 2in. Bore, 16in. Stroke, 1 1/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 2, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 1 1/8 | *$144.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 16in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2 | *$349.99 |
 | Prince Divider/Combiner Valve-8GPM
Brand: Prince
The model RD-1500 divider/combiner valve. Flow into the inlet will be divided proportionally to the outlets and flow back into the outlets will be divided proportionally to the inlet. This will divide and combine for use on double acting cylinders and reversible motors. | *$169.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 5in. Bore, 12in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 5, Stroke Length (in.): 12, Closed Pin Center (in.): 24 1/2, Shaft Diameter (in.): 2 | *$299.99 |
 | Prince Directional Control Valves-Inlet Section, Model# 2012J
Brand: Prince
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. You can combine 1 to 10 sections per valve bank. Standard features: Load checks on each work port. Hard chrome plated spools, Compact construction to save space. Reversible handle. Extra fine spool metering. Parallel or tandem circuit. Foot mounting. Maximums: 20 GPM; operating temperature 180deg F and 3500 PSI. Power beyond plug and pressure, interchangeable with Gresen V20. | *$89.99 |
 | Prince Bolt Kit for 4 Spools
Brand: Prince
For Use With: 4 Work Sections and Inlet and Outlet Section | *$14.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2 in. Bore, 30in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 30, Closed Pin Center (in.): 42 1/4, Shaft Diameter (in.): 2 | *$389.99 |
 | Prince Adjustable Relief Valve, 3/4in.
Brand: Prince
This compact adjustable relief valve is adjustable to 3000 PSI. 20 gallon flow. | *$49.99 |
 | Prince Standard Outlet End Plate, Model# SVE21
Brand: Prince
Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. Power beyond plug capability. Use with double-acting cylinders. U.S.A. | *$39.99 |
 | Prince 4-Way Detent Valve - 30 GPM
Brand: Prince
Adjustable relief pressure from 1500 PSI to 3000 PSI. Preset at 2000 PSI. Designed for wood splitters using tractor hydraulics and closed center systems. Moving handle toward valve puts handle in detent and retracts cylinder. Handle stays in this position until moved. 30 GPM rated flow. 3/4in. inlet and outlet, 1/2in. working ports. 3-year limited warranty. U.S.A. | *$179.99 |
 | Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A
Brand: Prince
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. Max. PSI: 2,000, Shaft Diameter (in.): 1 3/8, Shaft Type: Spline 6-tooth, GPM: 11.4, Material: Aluminum and cast iron, Rotations Per Minute: 540, Weight (lbs.): 36 | *$479.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 36in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 36, Closed Pin Center (in.): 46 1/4, Shaft Diameter (in.): 1 3/4 | *$319.99 |
 | Prince Welded Tee Cylinder - 2500 PSI, 3in.Bore, 8in.Stroke, 1 1/2in. Shaft, Model# PMC-8308
Brand: Prince
Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. Max. PSI: 2,500, Bore Diameter (in.): 3, Stroke Length (in.): 8, Closed Pin Center (in.): 16, Shaft Diameter (in.): 1 1/2 | *$159.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 4 1/2in. Bore, 16in. Stroke, 2in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4 1/2, Stroke Length (in.): 16, Closed Pin Center (in.): 31 1/2, Shaft Diameter (in.): 2 | *$329.99 |
 | Prince 3 Spool Control Valve, Model# HC-V-R21
Brand: Prince
Three spool control valve with float on one spool. Load checks each spool, to 25 GPM. Relief valve preset at 2000 PSI; adjusts from 1500-3000 PSI. Power beyond capacity. 3/4in. inlet/outlet ports, 1/2in. work ports. USA | *$319.99 |
| Prince SP20 Series Hydraulic Gear Pump - 1.22 Cu. In., CCW, Model# SP20B20A9H4-L
Brand: Prince
Compact, lightweight gear pump is built with high-strength aluminum body housing and end covers. Delivers high efficiency and low noise. One-pc. hardened alloy steel gears and driveshaft. Operating pressures up to 3000 PSI. Ideal for material handling, aerial lifts, lawn and turf care, agriculture, construction and other applications. 3-year limited warranty. U.S.A. | *$259.99 |
| Prince Tie-Rod Cylinder - 3000 PSI, 3 1/2in. Bore, 12in. Stroke, 1 3/8in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 3 1/2, Stroke Length (in.): 12, Closed Pin Center (in.): 22 1/4, Shaft Diameter (in.): 1 3/8 | *$189.99 |
 | Prince Tie-Rod Cylinder - 3000 PSI, 4in. Bore, 10in. Stroke, 1 3/4in. Shaft
Brand: Prince
Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A. Max. PSI: 3,000, Bore Diameter (in.): 4, Stroke Length (in.): 10, Closed Pin Center (in.): 20 1/4, Shaft Diameter (in.): 1 3/4 | *$229.99 |
 | Prince PTO Tractor Pump 21 GPM, Model# HC-PTO-1A
Brand: Prince Part Number: 438-500
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump. Max. PSI: 2,000, Shaft Diameter (in.): 1 3/8, Shaft Type: Spline 6-tooth, GPM: 21, Material: Aluminum and cast iron, Rotations Per Minute: 540, Weight (lbs.): 40 | *$499.99 |
 | SEPTLS5771200HBASD - Protoblack Torqueplus Combination Wrench Sets
Brand: Proto Part Number: 577-1200HBASD
Unique arc design increases surface contact. Increased torque applied to fastener with fewer rounded edges. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. | *$102.69 |
 | SEPTLS5771236BASD - Torqueplus Protoblack 12-Point Combination Wrenches
Brand: Proto Part Number: 577-1236BASD
Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners. Reduces risk of fastener rounding. Applies more torque to fastener. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. Improves grip on worn, rounded fasteners. Shank is positioned at the center of box end, reduces the tendency of the wrench to cock. For access to areas where sockets and attachments will not fit or where greater leverage is required. | *$41.25 |
 | SEPTLS5771240BASD - Torqueplus Protoblack 12-Point Combination Wrenches
Brand: Proto Part Number: 577-1240BASD
Torqueplus fastening system drives off fastener body, more easily removing damaged fasteners. Reduces risk of fastener rounding. Applies more torque to fastener. Unique arc design increases surface contact. Anti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury. Improves grip on worn, rounded fasteners. Shank is positioned at the center of box end, reduces the tendency of the wrench to cock. For access to areas where sockets and attachments will not fit or where greater leverage is required. | *$48.54 |
 | Airbrake Assembly Hose 3/8" NPT 1/2" ID 84" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 84" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$20.61 |
| Airbrake Assembly Hose 3/8" NPT 3/8" ID 18" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 3/8" ID 18" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$6.96 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 36" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 36" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.13 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 48" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 48" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$13.74 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 16" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 16" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$6.92 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 54" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 54" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$11.58 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 46" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 46" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$13.65 |
 | Rubber Air Brake Hose, 1/2"
Brand: Pulsar
1/2" Rubber Air Brake Hose, 250 Feet Per Case | *$1.74 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 28" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 28" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$10.35 |
| Airbrake Assembly Hose 3/8" NPT 3/8" ID 16" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 3/8" ID 16" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$6.96 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 50" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 50" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$14.21 |
| Airbrake Assembly Hose 3/8" NPT 3/8" ID 40" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 3/8" ID 40" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.60 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 30" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 30" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$11.11 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 44" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 44" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$10.16 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 22" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 22" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.62 |
| Airbrake Assembly Hose 3/8" NPT 3/8" ID 26" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 3/8" ID 26" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.91 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 18" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 18" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$6.92 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 24" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 24" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.62 |
| Airbrake Assembly Hose 3/8" NPT 3/8" ID 24" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 3/8" ID 24" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.53 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 40" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 40" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$12.33 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 28" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 28" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.19 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 34" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 34" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.04 |
| Airbrake Assembly Hose 1/4" NPT 3/8" ID 20" Long
Brand: Pulsar
Airbrake Assembly Hose 1/4" NPT 3/8" ID 20" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$7.34 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 16" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 16" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$8.85 |
| Airbrake Assembly Hose 3/8" NPT 1/2" ID 72" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 1/2" ID 72" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$17.51 |
| Rubber Air Brake Hose, 3/8"
Brand: Pulsar
3/8" Rubber Air Brake Hose, 250 Feet Per Case | *$1.27 |
| Airbrake Assembly Hose 3/8" NPT 3/8" ID 38" Long
Brand: Pulsar
Airbrake Assembly Hose 3/8" NPT 3/8" ID 38" Long, made in strict accordance with SAE J1402 and DOT specifications, Fittings are permanently attached with a solid male NPT fitting one end and a female swivel with male pipe adapter at the other end. | *$9.51 |
|
