 | Campbell TFP 51-LF Tank Fitting Package Ll
Brand: Campbell Model: TFP 51-LF Part Number: TFP 51-LF
"CAMPBELL" WELL SYSTEM PRESSURE TANK FITTING
* Package contains: one lead free tank tee 1" x 3/4" one square D switch, one lead free 1/4" x 3" nipple, one lead free G1T-LF 0-100 PSI gauge, one drain valve and one lead free 1/2" relief valve
* This product contains less than 0.25% weighted average lead content on wetted surfaces | *$79.99 |
 | 1/4" NPTM Coupling
Brand: Campbell Hausfeld Part Number: MP2118
MP2118 This fitting is part of a complete line of quality accessories offered to properly install and maintain an air system. The male coupling might come in handy for a variety of projects at home or in the shop. It connects a variety of thread sizes and shapes with a thread size of 1/4''. This product comes with a 1 year limited warranty. Features: - Connects a variety of thread sizes and shapes - 1 year limited warranty Specifications: - Male NPT - Weight: .09 lbs. - Dimensions: 2.8'' H x .8'' W x 4.8'' D | *$2.99 |
 | 1/4" NPSM Coupling
Brand: Campbell Hausfeld Part Number: MP3223
MP3223 This fitting is part of a complete line of quality accessories offered to properly install and maintain an air system. The Male Coupling 1/4'' NPS(M) x 1/4'' NPS(M) might come in handy for a variety of projects at home or in the shop. It connects a variety of thread sizes and shapes with a thread size of 1/4''. This product comes with a 1 year limited warranty. Features: - Connects a variety of thread sizes and shapes - Male NPS - Weight: .09 lbs. - 1 year limited warranty - Dimensions: 2.75'' H x .75'' W x 4.75'' D | *$11.00 |
 | Cash Acme 15914A-0125 Shark Bite Temperature and Pressure Relief Valves, 3/4-Inch 125 PSI
Brand: Cash Acme Model: 15914A-0125 Part Number: 15914A-0125
Sold as each. For protection of water heaters and storage tanks. Automatic reseating. 210 deg. temperature relief, starts to open at 200 deg. "White Coat":thermal element coating to isolate mineral buildup. AGA approved. ASME and CSA listed. 125 PSI *3/4" Connection. 3" Element Extension. Manufacturer number: 15914A-0125. Country of origin: United States. Distributed by Cash Acme Div. of Reliance Ww. | *$3.21 |
 | Cash Acme 2016-0000 Shark Bite SharkBite Check Valve, 3/4-by-3/4-Inch
Brand: Cash Acme Model: 2016-0000 Part Number: U2016-0000
Check valve with push fit connections. Brass. UPC, IAPMO, and NSF 61 certified and approved. The fitting can be used with copper, PEX, and CPVC, and is rated at 200 F., 200 PSI. It is made of 1 piece DZR brass, which is a noncorrosive, low lead material. | *$11.31 |
 | Cash Acme 22185 Shark Bite Push-Fittings Ball Valve, 3/4-Inch
Brand: Cash Acme Model: 22185 Part Number: 22185
Cash Acme 22185 3/4" Push-Fittings Ball Valve Cash Acme 22185 3/4" Push-Fittings Ball Valve Features:;Cash Acme's full port ball valve now comes with SharkBite connections for easy installation;The body is composed of highly forged brass, and features a single lever control;Easy, quick push-fit installation using CTS copper, PEX, and CPVC;3/4";CA/VT Compliant | *$11.72 |
 | Hydraulic Knockout Punch Driver Kit
Brand: Central Hydraulics
Great for punching holes in steel, this punch driver features a hydraulic design that punches much faster than manual wrench-style punches. Kit includes a 10 ton pump and five of the most popular punches and dies. Pair with the 2-1/2" or 3" Knockout Punch And Die Sets (sold separately) to increase the tool's capacity.
Punch holes up to 2" diameter in 11 gauge mild and 16 gauge stainless steel
Compact design is easily portable to any job site
Quick and easy to use
Includes 10 ton pump with pressure hose, five punches and dies, 3/4" and 3/8" threaded studs, an adapter, and a carrying case. Die sizes (actual hole size x pipe diameter): 1.115" x 3/4"; 1.362" x 1"; 1-11/16" x 1-1/4 "; 1-15/16" x 1-1/2"; 2-3/8" x 2" | *$113.90 |
 | Chicago Die Casting 95005 Pillow Block
Brand: Chicago Die Casting Part Number: 95005
Flanged sintered bronze bearing thrust side with built in oil reservoir. No. 95005: 1 2" shaft diameter No. 95006: 5 8" shaft diameter No. 95007: 3 4" shaft diameter | *$9.29 |
 | Chicago Die Casting 95007 Pillow Block
Brand: Chicago Die Casting Part Number: 95007
Flanged sintered bronze bearing thrust side with built in oil reservoir. No. 95005: 1 2" shaft diameter No. 95006: 5 8" shaft diameter No. 95007: 3 4" shaft diameter | *$7.33 |
 | Chicago Die Casting 95006 Pillow Block
Brand: Chicago Die Casting Model: 9-500-6-5/8 Part Number: 95006
Flanged sintered bronze bearing thrust side with built in oil reservoir. No. 95005: 1 2" shaft diameter No. 95006: 5 8" shaft diameter No. 95007: 3 4" shaft diameter | *$6.84 |
| | Coilhose Pneumatic RK-090 1/4" Ridgid Hose Repair Kit (Carton of 10)
Brand: Coilhose Pneumatics Part Number: 166-RK090 | *$20.87 |
 | CM COLUMBUS MCKINNON 664021 "HAMMERLOK" COUPLING LINK 7/32"
Brand: Columbus McKinnon Model: 664021 Part Number: 664021
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Chain Size: 7/32"
Working Load Limit: 2,100 Lbs. | *$26.99 |
| Hammerlok Coupling Links Model Code: AB - Price is for 1 Each (part# 664028)
Brand: Columbus McKinnon Model: 664028 Part Number: 664028
664028 Model Code: AB - Price is for 1 Each (part# 664028) This item features: -Also used for installing new body chain in used slings. -Attaches chain to masterlinks and eye type hooks. -Permits fast assembly. -Material: Steel. Model Code  Model Description AAChain Size:1/2 in, Working Load Limit:12000 lb, Color:Black, Locking Type:Folding Link, Wire Diam:1/2 in ABChain Size:1/4 in, Working Load Limit:3500 lb, Color:Black, Locking Type:Folding Link ACChain Size:3/4 in, Working Load Limit:28300 lb, Color:Black, Locking Type:Folding Link, Wire Diam:3/4 in ADChain Size:3/8 in, Working Load Limit:7100 lb, Type:Folding Link AEChain Size:5/8 in, Working Load Limit:18100 lb, Color:Black, Locking Type:Folding Link, Wire Diam:5/8 in | *$33.99 |
 | Hammerlok Coupling Links Model Code: AD - Price is for 1 Each (part# 664038)
Brand: Columbus McKinnon Model: 664038 Part Number: 664038
664038 Model Code: AD - Price is for 1 Each (part# 664038) This item features: -Also used for installing new body chain in used slings. -Attaches chain to masterlinks and eye type hooks. -Permits fast assembly. -Material: Steel. Model Code  Model Description AAChain Size:1/2 in, Working Load Limit:12000 lb, Color:Black, Locking Type:Folding Link, Wire Diam:1/2 in ABChain Size:1/4 in, Working Load Limit:3500 lb, Color:Black, Locking Type:Folding Link ACChain Size:3/4 in, Working Load Limit:28300 lb, Color:Black, Locking Type:Folding Link, Wire Diam:3/4 in ADChain Size:3/8 in, Working Load Limit:7100 lb, Type:Folding Link AEChain Size:5/8 in, Working Load Limit:18100 lb, Color:Black, Locking Type:Folding Link, Wire Diam:5/8 in | *$25.99 |
| Hammerlok Coupling Links Model Code: AA - Price is for 1 Each (part# 664050)
Brand: Columbus McKinnon Model: 664050 Part Number: 664050
664050 Model Code: AA - Price is for 1 Each (part# 664050) This item features: -Also used for installing new body chain in used slings. -Attaches chain to masterlinks and eye type hooks. -Permits fast assembly. -Material: Steel. Model Code  Model Description AAChain Size:1/2 in, Working Load Limit:12000 lb, Color:Black, Locking Type:Folding Link, Wire Diam:1/2 in ABChain Size:1/4 in, Working Load Limit:3500 lb, Color:Black, Locking Type:Folding Link ACChain Size:3/4 in, Working Load Limit:28300 lb, Color:Black, Locking Type:Folding Link, Wire Diam:3/4 in ADChain Size:3/8 in, Working Load Limit:7100 lb, Type:Folding Link AEChain Size:5/8 in, Working Load Limit:18100 lb, Color:Black, Locking Type:Folding Link, Wire Diam:5/8 in | *$42.99 |
 | Hammerlok Coupling Links Model Code: AE - Price is for 1 Each (part# 664062)
Brand: Columbus McKinnon Model: 664062 Part Number: 664062
664062 Model Code: AE - Price is for 1 Each (part# 664062) This item features: -Also used for installing new body chain in used slings. -Attaches chain to masterlinks and eye type hooks. -Permits fast assembly. -Material: Steel. Model Code  Model Description AAChain Size:1/2 in, Working Load Limit:12000 lb, Color:Black, Locking Type:Folding Link, Wire Diam:1/2 in ABChain Size:1/4 in, Working Load Limit:3500 lb, Color:Black, Locking Type:Folding Link ACChain Size:3/4 in, Working Load Limit:28300 lb, Color:Black, Locking Type:Folding Link, Wire Diam:3/4 in ADChain Size:3/8 in, Working Load Limit:7100 lb, Type:Folding Link AEChain Size:5/8 in, Working Load Limit:18100 lb, Color:Black, Locking Type:Folding Link, Wire Diam:5/8 in | *$72.99 |
| Hammerlok Coupling Links Model Code: AC - Price is for 1 Each (part# 664075)
Brand: Columbus McKinnon Model: 664075 Part Number: 664075
664075 Model Code: AC - Price is for 1 Each (part# 664075) This item features: -Also used for installing new body chain in used slings. -Attaches chain to masterlinks and eye type hooks. -Permits fast assembly. -Material: Steel. Model Code  Model Description AAChain Size:1/2 in, Working Load Limit:12000 lb, Color:Black, Locking Type:Folding Link, Wire Diam:1/2 in ABChain Size:1/4 in, Working Load Limit:3500 lb, Color:Black, Locking Type:Folding Link ACChain Size:3/4 in, Working Load Limit:28300 lb, Color:Black, Locking Type:Folding Link, Wire Diam:3/4 in ADChain Size:3/8 in, Working Load Limit:7100 lb, Type:Folding Link AEChain Size:5/8 in, Working Load Limit:18100 lb, Color:Black, Locking Type:Folding Link, Wire Diam:5/8 in | *$105.99 |
 | Udor Kappa 30 Pump
Brand: CON Model: jup_Kappa-30 Part Number: jup_Kappa-30
The Udor Kappa 30 Pump is a 2-diaphragm pump with universal drive face, pulsation dampener and control unit with adjustable pressure regulator, manual dump lever, dual ball valve outlets and a pressure gauge. These Udor Kappa pumps are ideal for a range of horticultural and agricultural spraying applications, as well as for lawn and turf care applications such as pest control. Use this pump with liquid fertilizers and abrasive materials to make all of your spraying needs met. | *$566.97 |
 | Current Tools 1521 Hydraulic Hand Pump
Brand: Current Tools Part Number: 1521
1521 Hydraulic Hand Pump. Unique stainless steel and aluminum construction for light weight and rugged use. Operates in any position. 6,500 psi ( max ) pressure. For use ONLY with Hydraulic Knockout Sets Cable Cutters. | *$350.00 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=1.750-16, K=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 010-011-113 | *$160.04 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 010-012-221 | *$159.53 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 010-012-224 | *$192.35 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.750-16, K=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 010-021-114 | *$160.60 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 010-022-225 | *$176.92 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: De-Sta-Co Part Number: 010-023-333 | *$196.38 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: De-Sta-Co Part Number: 010-023-335 | *$228.37 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1/2-20 thds., Stroke=.219 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-400
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$84.70 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 3/4-16 thds., Stroke=.313 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-501
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$92.40 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1-12 thds., Stroke=.500 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-702
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$98.18 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke=.500 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-002
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$118.85 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke=1.000 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-004
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$137.49 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 7/8-16 thds., Stroke=.500 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-502
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$156.30 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 2 1/2-16 thds., Stroke=1.000 (1 Each)
Brand: De-Sta-Co Part Number: 010-212-004
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial. | *$240.82 |
 | De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D.=.38, Port=#2 SAE (1 Each)
Brand: De-Sta-Co Part Number: 020-011-011DE
These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig. | *$214.77 |
| De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D.=.50, Port=#4 SAE (1 Each)
Brand: De-Sta-Co Part Number: 020-012-021DE
These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig. | *$260.02 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-475 | *$311.44 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Double Acting (1 Each)
Brand: De-Sta-Co Part Number: 030-1-D-475-R | *$311.44 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A=3.268, B=.866, C=M10 (1 Each)
Brand: De-Sta-Co Part Number: 031-S-2400
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$50.50 |
 | De-Sta-Co Hydraulic Power Workholding, Semi Automatic - Air/Hydraulic Booster, A=4.5, B=10.875 (1 Each)
Brand: De-Sta-Co Part Number: 039-101-000DE
Converts normal shop line air pressure to high pressure hydraulic power. With the system filled, the volume of oil required to actuate a cylinder or pressure point is only equal to the cubic content of the piston displacement. Boosters have built in manifold and are made of corrosion and wear-resistant materials. Hydraulic piston tube has wear rings and the air piston is self centering for long life. Boosters offer automatic relief of system overcharge as well as complete automatic bleeding with each return, eliminating prefilling. Large volume visible oil reservoir automatically replenishes the system with available reserves. 100 psig max. input air pressure. | *$753.51 |
| De-Sta-Co Hydraulic Power Workholding, Semi Automatic - Air/Hydraulic Booster, A=6.5, B=16.375 (1 Each)
Brand: De-Sta-Co Part Number: 039-104-000DE
Converts normal shop line air pressure to high pressure hydraulic power. With the system filled, the volume of oil required to actuate a cylinder or pressure point is only equal to the cubic content of the piston displacement. Boosters have built in manifold and are made of corrosion and wear-resistant materials. Hydraulic piston tube has wear rings and the air piston is self centering for long life. Boosters offer automatic relief of system overcharge as well as complete automatic bleeding with each return, eliminating prefilling. Large volume visible oil reservoir automatically replenishes the system with available reserves. 100 psig max. input air pressure. | *$1,034.09 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=1,650 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-1650 | *$233.52 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=2,500 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-2500 | *$217.34 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=5,000 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-5000 | *$248.68 |
| | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity=7,500 lbs. (1 Each)
Brand: De-Sta-Co Part Number: 040-1-7500
Hydraulic Power Workholding - Spring Advance Work Supports | *$283.05 |
 | De-Sta-Co Hydraulic Power Workholding, Jam Nut, B=1 1/8-16 (1 Each)
Brand: De-Sta-Co Part Number: 051-112-160 | *$23.16 |
| De-Sta-Co Hydraulic Power Workholding, Jam Nut, B=1 3/8-18 (1 Each)
Brand: De-Sta-Co Part Number: 051-137-180 | *$27.60 |
| De-Sta-Co Hydraulic Power Workholding, Jam Nut, B=2 5/8-20 (1 Each)
Brand: De-Sta-Co Part Number: 051-262-200 | *$30.67 |
 | De-Sta-Co Hydraulic Power Workholding, Flange Mounting Bracket, A=1.5, B=1.12, C=1 1/8-16 (1 Each)
Brand: De-Sta-Co Part Number: 052-112-160
Flange mounting brackets allow you to secure your swing/pull clamps in two ways. You may use the set screw and nylon thread protector ball (supplied) or simply lock the clamp using an optional jam nut. Swing clamps may also be screwed into a threaded hole and locked in position with a jam nut. | *$58.21 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C=2.998, O=1/4-20 (1 Each)
Brand: De-Sta-Co Part Number: 090-011-113 | *$235.95 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C=2.441, O=5/16-24 (1 Each)
Brand: De-Sta-Co Part Number: 090-012-221 | *$236.62 |
|
