 | CM COLUMBUS MCKINNON 664062 "HAMMERLOK" 80-GRADE COUPLING LINK 5/8"
Brand: Columbus McKinnon Model: 664062 Part Number: 664062
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Grade: 80
Chain Size: 58/"
Working Load Limit: 18,100 Lbs.
Material: Steel
Type: Folding Link | *$72.99 |
| CM COLUMBUS MCKINNON 664075 "HAMMERLOK" 80-GRADE COUPLING LINK 3/4"
Brand: Columbus McKinnon Model: 664075 Part Number: 664075
"HAMMERLOK" COUPLING LINK
The Hammerlok now features a new pin design with a flared split tube. The tube has a single wall flared at both ends with a split down the center giving the appearance of a C when viewed from the side. The split retainer is a reliable user-friendly device for securing the load pin. There is no change to fit, form, or function of the Hammerlok.
Highlights:
Permits fast assembly.
Attaches chain to masterlinks and eye type hooks.
Also used for installing new body chain in used slings.
Grade: 80
Chain Size: 3/4"
Working Load Limit: 28,300 Lbs.
Material: Steel
Type: Folding Link | *$105.99 |
 | Current Tools 1521 Hydraulic Hand Pump
Brand: Current Tools Part Number: 1521
1521 Hydraulic Hand Pump. Unique stainless steel and aluminum construction for light weight and rugged use. Operates in any position. 6,500 psi ( max ) pressure. For use ONLY with Hydraulic Knockout Sets Cable Cutters. | *$273.00 |
 | Current Tools 1523 1/4" x 3' Hydraulic Hose
Brand: Current Tools Part Number: 1523
1523 1/4" x 3' Hydraulic Hose. Unique stainless steel and aluminum construction for light weight and rugged use. Operates in any position. 6,500 psi ( max ) pressure. For use ONLY with Hydraulic Knockout Sets Cable Cutters. | *$28.95 |
 | Current Tools 290 Electric Pump 11/2 HP
Brand: Current Tools Part Number: 290
290 Electric Pump 11/2 HP. Heavy duty design for long life. Convenient pendant control for remote operation. 2 speeds for fast ram advance. For use with hydraulic benders. | *$2,707.95 |
| | Current Tools 291 Optional High-pressure hose 3/8" x 6' with 2 each 3/8" male couplers
Brand: Current Tools Part Number: 291
291 Optional High-pressure hose 3/8" x 6' with 2 each 3/8" male couplers. Heavy duty design for long life. Convenient pendant control for remote operation. 2 speeds for fast ram advance. For use with hydraulic benders. | *$128.95 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1/2-20 thds., Stroke = .219 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-400
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$82.23 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 3/4-16 thds., Stroke = .313 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-501
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$89.71 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1-12 thds., Stroke = .500 (1 Each)
Brand: De-Sta-Co Part Number: 010-210-702
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$95.32 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke = .500 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-002
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$115.39 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 1 5/16-16 thds., Stroke = 1.000 (1 Each)
Brand: De-Sta-Co Part Number: 010-211-004
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$133.49 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Cylinder, 2 1/2-16 thds., Stroke = 1.000 (1 Each)
Brand: De-Sta-Co Part Number: 010-212-004
Single-acting with spring return action, these cylinders can be used singly or combined by using a common manifold. Easily mounted. Can be used in any attitude and requires only a single inlet port. Threaded cylinders can be directly inserted into a fixture or used with mounting blocks. Locknuts, mounting blocks and end caps are available. Call for price and delivery. The 1-5/16" through 2-1/2" diameters are furnished with a radial port as well as axial." | *$233.81 |
 | De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D. = .38, Port = #2 SAE (1 Each)
Brand: De-Sta-Co Part Number: 020-011-011DE
These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig." | *$208.51 |
| De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D. = .50, Port = #4 SAE (1 Each)
Brand: De-Sta-Co Part Number: 020-012-021DE
These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig." | *$252.45 |
| De-Sta-Co Hydraulic Power Workholding, Hollow Cylinder, I.D. = .63, Port = #4 SAE (1 Each)
Brand: De-Sta-Co Part Number: 020-013-031DE
These hollow cylinders can be used to push or pull depending on the position of the ram. They will actuate a rod of any length or shape and are extremely effective in translating power to a remote location. Larger piston diameter provides greater clamping force. Hardened steel piston and rod. Supplied with through hole insert threaded into the top. Optional thread inserts (inch/metric) are available as special order. An accessory adapter plate,which fastens to the ram base and permits mounting the ram with a single cap screw is also available as special order. Please call for price and delivery. Maximum input pressure is 3,500 psig." | *$301.68 |
 | De-Sta-Co Hydraulic Power Workholding, Semi Automatic - Air/Hydraulic Booster, A = 4.5, B = 10.875 (1 Each)
Brand: De-Sta-Co Part Number: 039-101-000DE
Converts normal shop line air pressure to high pressure hydraulic power. With the system filled, the volume of oil required to actuate a cylinder or pressure point is only equal to the cubic content of the piston displacement. Boosters have built in manifold and are made of corrosion and wear-resistant materials. Hydraulic piston tube has wear rings and the air piston is self centering for long life. Boosters offer automatic relief of system overcharge as well as complete automatic bleeding with each return, eliminating prefilling. Large volume visible oil reservoir automatically replenishes the system with available reserves. 100 psig max. input air pressure." | *$731.56 |
 | De-Sta-Co Hydraulic Power Workholding, Jam Nut, B = 1 1/8-16 (1 Each)
Brand: De-Sta-Co Part Number: 051-112-160 | *$22.06 |
| De-Sta-Co Hydraulic Power Workholding, Jam Nut, B = 1 3/8-18 (1 Each)
Brand: De-Sta-Co Part Number: 051-137-180 | *$26.29 |
| De-Sta-Co Hydraulic Power Workholding, Jam Nut, B = 1 7/8-16 (1 Each)
Brand: De-Sta-Co Part Number: 051-187-160 | *$26.29 |
| De-Sta-Co Hydraulic Power Workholding, Jam Nut, B = 2 5/8-20 (1 Each)
Brand: De-Sta-Co Part Number: 051-262-200 | *$37.95 |
 | De-Sta-Co Hydraulic Power Workholding, Flange Mounting Bracket, A = 1.5, B = 1.12, C = 1 1/8-16 (1 Each)
Brand: De-Sta-Co Part Number: 052-112-160
Flange mounting brackets allow you to secure your swing/pull clamps in two ways. You may use the set screw and nylon thread protector ball (supplied) or simply lock the clamp using an optional jam nut. Swing clamps may also be screwed into a threaded hole and locked in position with a jam nut. | *$55.44 |
| De-Sta-Co Hydraulic Power Workholding, Flange Mounting Bracket, A = 1.75, B = 1.34, C = 1 3/8-18 (1 Each)
Brand: De-Sta-Co Part Number: 052-137-180
Flange mounting brackets allow you to secure your swing/pull clamps in two ways. You may use the set screw and nylon thread protector ball (supplied) or simply lock the clamp using an optional jam nut. Swing clamps may also be screwed into a threaded hole and locked in position with a jam nut. | *$55.44 |
 | De-Sta-Co Hydraulic Accessory, Hydraulic Muffler, 3/8 NPT (1 Each)
Brand: De-Sta-Co Part Number: 70916 | *$66.05 |
| | Delsteel Paving Breaker Moil Point 7/8 Hex Shank #17114
Brand: Delsteel Part Number: 17114 | *$15.60 |
| | Delsteel Paving Breaker Chisel 7/8 Hex Shank #17214
Brand: Delsteel Part Number: 17214 | *$15.60 |
 | Ball Valve - 1/4" Full Port Forged Brass IPS (600WOG/150WSP)
Brand: DuraChoice Model: WB4170 Part Number: 41700 | *$6.02 |
 | Dynamic Fluid Components Hi/Lo Hydraulic Gear Pump - 13 GPM, 2-Stage, Model# GP-CBN-130-P-C
Brand: Dynamic
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. | *$295.99 |
| Dynamic Fluid Components Hi/Lo Hydraulic Gear Pump - 16 GPM, 2-Stage, Model# GP-CBN-160-P-C
Brand: Dynamic
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. | *$345.99 |
| Dynamic Fluid Components Hi/Lo Hydraulic Gear Pump - 8 GPM, 2-Stage, Model# GP-CBN-080-P-C
Brand: Dynamic
The Dynamic Fluid Components hi/lo hydraulic gear pump provides max. pressure of 900 PSI for low pressure and 3000 PSI for high pressure, making it an ideal choice for log splitters, presses and similar equipment requiring rapid movement of the cylinder at low pressure prior to switching to the high pressure mode to meet load requirements. | *$275.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-16-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-16-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-20-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. | *$185.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-25-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 3/4in. Shaft, Model# GP-F20-25-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-16-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-16-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-20-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in/rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-20-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-25-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, 5/8in. Shaft, Model# GP-F20-25-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-16-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-16-S9-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.97 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-20-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.22 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-25-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 2900 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-25-S9-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 1.52 cu. in./rev. | *$185.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-04-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. | *$175.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-04-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. | *$185.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-06-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-06-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-08-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.48 cu. in./rev. | *$175.99 |
