 | SEPTLS277SCH121H - Single-Acting Cylinder/Pump Sets
Brand: Enerpac Part Number: 277-SCH-121H
Single-Acting Cylinder/Pump Sets | *$1,170.84 |
| SEPTLS277SCH202H - Single-Acting Cylinder/Pump Sets
Brand: Enerpac Part Number: 277-SCH-202H
Single-Acting Cylinder/Pump Sets | *$1,477.36 |
| SEPTLS277SCH302H - Single-Acting Cylinder/Pump Sets
Brand: Enerpac Part Number: 277-SCH-302H
Single-Acting Cylinder/Pump Sets | *$1,756.06 |
| Handpump w/15 Ton 4" Cyl (277-SCR-154H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-154H
Item #: 277-SCR-154H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 15 tons [Max]liCylinder Stroke = 4.000 inliCollapsed Height = 7.88 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-154 Cylinder, P-392 Hand Pump, HC-7206 Hose, GP-10S Gauge, GA-2 Gauge AdaptorliQuantity = 5 per setliWt. = 30.60 lb/ul brCustomers also search for: Discount Handpump w/15 Ton 4" Cyl, Buy Handpump w/15 Ton 4" Cyl, Wholesale Handpump w/15 Ton 4" Cyl, 662005803675, SCR-154H, Hydraulic Sets | *$1,093.94 |
| 80369 Hand Pump w/6" 15 Ton Cylinder (277-SCR-156H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-156H
Item #: 277-SCR-156H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 15 tons [Max]liCylinder Stroke = 6.000 inliCollapsed Height = 10.69 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-156 Cylinder, P-392 Hand Pump, HC-7206 Hose, GP-10S Gauge, GA-2 Gauge AdaptorliQuantity = 5 per setliWt. = 35 lb/ul brCustomers also search for: Discount 80369 Hand Pump w/6" 15 Ton Cylinder, Buy 80369 Hand Pump w/6" 15 Ton Cylinder, Wholesale 80369 Hand Pump w/6" 15 Ton Cylinder, 662005803699, SCR-156H, Hydraulic Sets | *$1,131.85 |
| 80373 Handpump w/25 T (277-SCR-252H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-252H
Item #: 277-SCR-252H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 25 tons [Max]liCylinder Stroke = 2.000 inliCollapsed Height = 6 1/2 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-252 Cylinder, P-392 Hand Pump, HC-7206 Hose, GF-20P Gauge, GA-2 Gauge AdaptorliQuantity = 5 per setliWt. = 33 lb/ul brCustomers also search for: Discount 80373 Handpump w/25 T, Buy 80373 Handpump w/25 T, Wholesale 80373 Handpump w/25 T, 662005803736, SCR-252H, Hydraulic Sets | *$1,147.02 |
| 80375 Handpump w/25t 4" (277-SCR-254H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-254H
Item #: 277-SCR-254H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 25 tons [Max]liCylinder Stroke = 4.000 inliCollapsed Height = 8 1/2 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-254 Cylinder, P-392 Hand Pump, HC-7206 Hose, GF-20P Gauge, GA-2 Gauge AdaptorliQuantity = 5 per setliWt. = 37.30 lb/ul brCustomers also search for: Discount 80375 Handpump w/25t 4" , Buy 80375 Handpump w/25t 4" , Wholesale 80375 Handpump w/25t 4" , 662005803750, SCR-254H, Hydraulic Sets | *$1,195.75 |
| 80377 Handpump Set w/25t (277-SCR-256H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-256H
Item #: 277-SCR-256H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 25 tons [Max]liCylinder Stroke = 6.250 inliCollapsed Height = 10 3/4 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-256 Cylinder, P-392 Hand Pump, HC-7206 Hose, GF-20P Gauge, GA-2 Gauge AdaptorliQuantity = 5 per setliWt. = 41.40 lb/ul brCustomers also search for: Discount 80377 Handpump Set w/25t, Buy 80377 Handpump Set w/25t, Wholesale 80377 Handpump Set w/25t, 662005803774, SCR-256H, Hydraulic Sets | *$1,276.98 |
| 80353 Handpump w/5t 5" C (277-SCR-55H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-55H
Item #: 277-SCR-55H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 5 tons [Max]liCylinder Stroke = 5.000 inliCollapsed Height = 8 1/2 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-55 Cylinder, P-142 Hand Pump, HC-7206 Hose, GP-10S Gauge, GA-4 Gauge AdaptorliQuantity = 5 per setliWt. = 16.80 lb/ul brCustomers also search for: Discount 80353 Handpump w/5t 5" C, Buy 80353 Handpump w/5t 5" C, Wholesale 80353 Handpump w/5t 5" C, 662005803538, SCR-55H, Hydraulic Sets | *$848.07 |
| | 10831 Manual Operated Ch (277-V-66) Category: Hydraulic Tool Parts and Accessories
Brand: Enerpac Part Number: 277-V-66
Item #: 277-V-66. Used for load holding applications with single and double acting cylindersbrValve is manually opened to allow oil to flow back to tank when cylinder retracts pulliOperating Pressure = 10000.0 psi [Max]liInside Type = Check ValveliWt. = 3.90 lb/ul brCustomers also search for: Discount 10831 Manual Operated Ch, Buy 10831 Manual Operated Ch, Wholesale 10831 Manual Operated Ch, 662005108312, V-66, Hydraulic Tool Parts and Accessories | *$296.77 |
 | SEPTLS277WMC2000 - Self-Contained Hydraulic Cutters
Brand: Enerpac Part Number: 277-WMC-2000
Self-Contained Hydraulic Cutters | *$2,000.00 |
 | Enerpac Hydraulic Power Workholding Low Profile Swing Clamp No. ASC-30, Clamp force=1,375 lbs. (1 Each)
Brand: Enerpac Part Number: ASC-30
These low profile swing clamps are designed to swing 97degrees to position the arm over the work piece. A vertical plunger then exerts an upward thrust on the back end of the swing arm providing powerful downward pressure to clamp the work piece. Arm can swing right or left. Operating pressure is 1,200 to 2,500 psi. | *$602.00 |
 | Enerpac Hydraulic Power Workholding Rest Button No. B3754, 3/8-24 thds., .50 Lg. (1 Each)
Brand: Enerpac Part Number: B375-4 | *$28.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap.=2,600 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-122
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$83.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-202, Use w/cap.=3,900 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-202
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$97.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-22, Use w/cap.=500 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-22
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$52.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-52, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-52
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$63.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-121, Use w/cap.=2,600 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-121
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$53.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-2131ST (1 Each)
Brand: Enerpac Part Number: CST-2131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$95.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9381ST (1 Each)
Brand: Enerpac Part Number: CST-9381
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$125.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18251ST (1 Each)
Brand: Enerpac Part Number: CST18251
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$140.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9131ST (1 Each)
Brand: Enerpac Part Number: CST9131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$110.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18131ST (1 Each)
Brand: Enerpac Part Number: CTS18131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$125.00 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2129-25 (1 Each)
Brand: Enerpac Part Number: CY2129-25
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$301.00 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2129-5 (1 Each)
Brand: Enerpac Part Number: CY2129-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$366.00 |
| Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2754-5 (1 Each)
Brand: Enerpac Part Number: CY2754-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$443.00 |
 | Enerpac Hydraulic Power Workholding Jam Nut No. JN-48, 1 5/16-16 (1 Each)
Brand: Enerpac Part Number: FN-331 | *$30.50 |
| Enerpac Hydraulic Power Workholding Jam Nut No. JN-12, 1 7/8-16 (1 Each)
Brand: Enerpac Part Number: FN-481 | *$34.00 |
 | Hydraulic-Equipment - Pump, Hand, 2-Speed
Brand: Enerpac Part Number: P-80
Hydraulic-Equipment - Pump, Hand, 2-Speed | *$650.15 |
 | Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-3002SB (1 Each)
Brand: Enerpac Part Number: PACG-3002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$712.00 |
| Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-5002SB (1 Each)
Brand: Enerpac Part Number: PACG5002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$646.00 |
 | Hydraulic-Equipment - 50 Ton Cylinder, S/A
Brand: Enerpac Part Number: RC-502
Hydraulic-Equipment - 50 Ton Cylinder, S/A | *$1,088.83 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-102 (1 Each)
Brand: Enerpac Part Number: RW-102
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$274.00 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-50 (1 Each)
Brand: Enerpac Part Number: RW-50
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$209.00 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-53 (1 Each)
Brand: Enerpac Part Number: RW-53
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$236.00 |
| Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-55 (1 Each)
Brand: Enerpac Part Number: RW-55
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$250.00 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. RWH-121 (1 Each)
Brand: Enerpac Part Number: RWH-121
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$551.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-1, M=1 7/8-16 (1 Each)
Brand: Enerpac Part Number: SC-1
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$687.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-3, M=1-12 (1 Each)
Brand: Enerpac Part Number: SC-3
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$478.00 |
 | Enerpac Hydraulic Power Workholding No. SLRS51, Light Duty, Single Acting, Lower Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SLRS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
 | Enerpac Hydraulic Power Workholding No. STRD121, Light Duty, Double Acting, Threaded, w/o Arm (1 Each)
Brand: Enerpac Part Number: STRD-121
Hydraulic Power Workholding - Light Duty - These swing cylinders rotate 90° as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
| Enerpac Hydraulic Power Workholding No. STRS121, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Enerpac Part Number: STRS-121
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SURS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$430.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-271ST (1 Each)
Brand: Enerpac Part Number: TS-271ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$75.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9191ST (1 Each)
Brand: Enerpac Part Number: TS-9191ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$92.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-971ST (1 Each)
Brand: Enerpac Part Number: TS-971ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$83.00 |
 | Enerpac Hydraulic Power Workholding Sequence Valve For Time Interval Control No. V-2000 (1 Each)
Brand: Enerpac Part Number: V-2000
These valves can be plumbed to provide a sequence of clamping functions from just one hydraulic power source. Sequenced locating, clamping, and/or supporting functions can be controlled in a logical order by plumbing one sequence valve to each clamping group requiring a different time interval. The valve can be preset to different pressure values, allowing fluid flow in sequence as the hydraulic pressure increases in the entire system to whatever the power source provides, after all valves are open. These valves are basically timers, not pressure controllers. The VE-211 features a lock nut which secures the hydraulic pressure setting for the secondary circuit and a tamper proof cover can be placed over the set screw. Maximum operating pressure is 5,000 psi. | *$319.00 |
 | Enerpac Hydraulic Power Workholding Threaded Cylinder, Double Acting, No. WMT-39 (1 Each)
Brand: Enerpac Part Number: WMT-39
Cylinders can be fixtured into manual strap or bridge clamp assemblies. Fully threaded bodies allow cylinders to be threaded directly into tapped holes of the fixture for easy installation. Available as single-acting spring return or double acting hydraulic return. The VE-90 can use carbide grippers. | *$273.00 |
 | Enerpac Hydraulic Power Workholding Threaded Cylinder, Single Acting, No. WRT-21 (1 Each)
Brand: Enerpac Part Number: WRT-21
Cylinders can be fixtured into manual strap or bridge clamp assemblies. Fully threaded bodies allow cylinders to be threaded directly into tapped holes of the fixture for easy installation. Available as single-acting spring return or double acting hydraulic return. The VE-90 can use carbide grippers. | *$180.00 |
