 | Chicago Die Casting #600A5 1/2x6 Pulley
Brand: Chicago Die Casting Model: 600A5 Part Number: 600A5
1/2" Bore x 6" Diameter, Single V-Groove Die Cast Pulley, For 4L Or 1/2" x 11/32" Belts, Hollow Head Set Screw. | *$9.13 |
 | Chicago Die Casting #600A6 5/8x6 Pulley
Brand: Chicago Die Casting Model: 600A6 Part Number: 600A6
5/8" Bore x 6" Diameter, Single V-Groove Die Cast Pulley, For 4L Or 1/2" x 11/32" Belts, Hollow Head Set Screw. | *$9.10 |
 | Chicago Die Casting #6065 1/2" Motor Arbor
Brand: Chicago Die Casting Model: 606-5 Part Number: 6065
Motor Arbor Attachment, Fits 1/2" Motor Shaft, With 1/2" Right Hand Threaded Shaft, Accepts 3/4" Wide Wheels. | *$3.30 |
 | Chicago Die Casting #6066 5/8" Motor Arbor
Brand: Chicago Die Casting Model: 606-6 Part Number: 6066
Motor Arbor Attachment, Fits 5/8" Motor Shaft, With 1/2" Right Hand Threaded Shaft, Accepts 3/4" Wide Wheels. | *$3.30 |
 | Chicago Die Casting 1/2In Pillow Block 7-500-5
Brand: Chicago Die Casting Model: 7-500-5 Part Number: 7-500-5
Sintered bronze bearing, self-aligning. Will take up to 3 degrees misalignment per foot. 3-21/32"L x 1"W x 2"H, 1-1/8" center to base, 5/16" bolt size. Dimensions: 1-1/8''C, 3-1/16''A, 3/4''B, 21/32''D, 1-1/16''F, 1-1/32'' X = 1/2''G. | *$8.52 |
 | Chicago Die Casting 5/8X7 Single V-Groove Pulley 700A
Brand: Chicago Die Casting Model: 700A Part Number: 700A
For A belts, pulleys from 2'' to 12'' have keyways except 3/8'' and 1/2'' bores and 3/4'' bores in pulleys less than 4'' in diameter. All pulleys are with slotted headless set screws. In Sta-Pak cartons. For 4L or 1/2'' x 11/32'' belts. | *$13.73 |
 | Chicago Die Casting #800A6 5/8x8 Pulley
Brand: Chicago Die Casting Model: 800A6 Part Number: 800A6
5/8" Bore x 8" Diameter, Single V-Groove Die Cast Pulley, For 4L Or 1/2" x 11/32" Belts, Hollow Head Set Screw. | *$12.30 |
 | Chicago Die Casting 5-1/2 Pillow Bearing Block 9-500-5 1/2
Brand: Chicago Die Casting Model: 9-500-5 1/2 Part Number: 9-500-5 1/2
Flanged sintered bronze bearing thrust side with built-in oil reservoir. | *$6.73 |
 | Neoprene 1/4" Thick X 54" Wide X 1'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$14.19 |
| Neoprene 1/8" Thick X 54" Wide X 1'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$7.59 |
 | Neoprene With Adhesive 1/8" Thick X 54" Wide X 1'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$11.28 |
| Neoprene With Adhesive 5/8" Thick X 54" Wide X 10'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$354.40 |
| Neoprene 1/8" Thick X 54" Wide X 4'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$30.36 |
| Neoprene 1/8" Thick X 54" Wide X 2'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$15.18 |
| Neoprene With Adhesive 1/2" Thick X 54" Wide X 1'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$35.37 |
| Neoprene 1/8" Thick X 54" Wide X 3'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$22.70 |
| Neoprene 1/4" Thick X 54" Wide X 2'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$28.80 |
| Neoprene 1/2" Thick X 54" Wide X 1'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$26.52 |
| Neoprene With Adhesive 1/4" Thick X 54" Wide X 1'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$20.22 |
| Neoprene 5/8" Thick X 54" Wide X 12'
Brand: Cleverbrand
Neoprene is a synthetic rubber compound that can be used for a variety of applications, including but not limited to gaskets, hoses, corrosion-resistant coatings, noise insulation and padding. Other sizes available. Search for Cleverbrand Neoprene on Amazon search for more sizes. | *$315.65 |
 | ClimbTek CT412 12-Foot 300-Pound Duty Rating Four-Section Aluminum Articulating Ladder
Brand: ClimbTek Model: CT412 Part Number: CT412 | *$206.70 |
 | ClimbTek CT416 16-Foot 300-Pound Duty Rating Four-Section Aluminum Articulating Ladder
Brand: ClimbTek Model: CT416 Part Number: CT416
16', Articulating Ladder, 4' Section, Climbtek's Exclusion Patent License For Single Hand Operation, Offers Single Hand Release Rod Allowing For Easy Hinge Adjustment, Red Lock Bolt Label Immediately Identify The Locked Or Unlocked Hinge Position, Release Rod Guard For Added Safety, Hinge Design Eliminates Potential Pinch Points When Opening Closing Ladder. | *$202.99 |
 | ClimbTek PS100 2-In-1 Platform
Brand: ClimbTek Model: PS100
U.S.A.-made Climbtek 2-in-1 Platform / Shelf. This Climbtek 2-in-1 Platform Shelf gives you a place to set your tools or paint on any Climbtek ladder. Place this 11 x 11 1/4" Shelf / Platform on almost any rung (except the bottom 2 rungs). Its high-strength steel construction and non-slip perforated construction is even sturdy enough to stand on. The bottom edges of this Platform are covered with vinyl so it easily glides over the rungs for installation. Get yours now! Please Note: This item is shipped directly from the factory. Please allow an extra 2-4 weeks for delivery... sorry no express shipping available. We are unable to ship factory direct items to Alaska, Hawaii, Canada, Puerto Rico or APO or FPO addresses. Climbtek 2-in-1 Platform Shelf | *$49.56 |
 | ClimbTek SP412 12-Foot Scaffold Platform
Brand: ClimbTek Model: SP412 Part Number: SP412
12', Scaffold Platform, For Use With Articulating Ladder #ct412, Scaffold Platform Boards Are Made From 9 Ply Latvian Birch Plywood For Incredible Strength, Safety, Warp Resistance Integrity, Boards Lock Into The Ladder For Safety Have Slip Resistant Top Surface, Single Finger Release Latch Makes Attachment Removal Easy, Boards Are Packed 2 To A Set For Individual Use In Any Of The Stairway Positions Or Together In Any Of The Scaffold Positions, Platform Boards Can Be Stored In Place On The Ladder When Folded In Storage Position. | *$41.74 |
 | ClimbTek SP416 16-Foot Scaffold Platform for Use with ClimbTek CT 416
Brand: ClimbTek Model: SP416 Part Number: 345740 | *$68.01 |
 | ClimbTek SS100 Stand Off/Stabilizer
Brand: ClimbTek Model: SS100 | *$49.00 |
 | Cloverdale 24950 Band-It Wood Veneer Facing
Brand: Cloverdale Part Number: 24950
Made of hardwoods, veneer is presanded and ready for finishing. Use for redoing antiques, kitchen cabinets, tables, or putting the finishing touches on hobby projects. Veneer is backed with resin impregnated thermoset paper for easy handling and added str | *$37.40 |
 | 12x48 Red Oak Veneer
Brand: Cloverdale Model: 12410 Part Number: 12410
Band-It 12" x 48", Red Oak, Wood Veneer Paperback Facing, Applies With Contact Cement To Wood, Plywood, Particle Board, Hardboard Metal, Trim With Scissors, Pre-Sanded, Ready To Finish. | *$16.04 |
 | 12x48 WHT Birch Veneer
Brand: Cloverdale Model: 12450 Part Number: 12450
Band-It 12" x 48", White Birch, Wood Veneer Paperback Facing, Applies With Contact Cement To Wood, Plywood, Particle Board, Hardboard Metal, Trim WiScissors, Pre-Sanded, Ready To Finish. | *$17.99 |
 | Veneer Facing, 24" x 48" Birch
Brand: Cloverdale Model: 24450 Part Number: 24450
WOOD VENEER FACING
Select furniture grade hard wood veneer
Trim to size
Apply with solvent base contact adhesive (Ace Nos. 1114933, 12948)
Instructions included
Pre-sanded, ready to finish
Boxed
24"x48"
White Birch | *$19.49 |
 | 5PK Edge Trimmer Blade
Brand: Cloverdale Model: 25233 Part Number: 25233
Band-It, 5 Pack, Replacement Blades For Band-It Edge Trimmer. | *$1.87 |
 | Band-It Edge Trimmer
Brand: Cloverdale Model: 33437 Part Number: 33437
Band-It Edge Trimmer, Single-Sided, Compact Durable, Trims In Both Directions. | *$7.95 |
 | Cloverdale 34210 "Band-it" Wood Veneer Edge Banding 3/4"x25 - Red Oak
Brand: Cloverdale Model: 34210 Part Number: 34210
Sold as each. Precoated heat activated for cabinets. Apply with household iron. Pre-sanded, ready to finish. Peggable polybag. 3/4"x25'. Red Oak . Manufacturer number: 34210. SKU #: 5005145. Country of origin: (TBA). Distributed by Cloverdale Company, Inc. | *$5.99 |
 | Cloverdale # 34250 Wood Veneer Edge Banding 3/4" X 25""
Brand: Cloverdale Model: 34250 Part Number: 34250
Sold as each. Precoated heat activated for cabinets. Apply with household iron. Pre-sanded, ready to finish. Peggable polybag. 3/4"x25'. White Birch . Manufacturer number: 34250. SKU #: 5005152. Country of origin: (TBA). Distributed by Cloverdale Company, Inc. | *$6.49 |
 | Cloverdale 38265 "Band-it" White Melamine Edging - 3/4"x25
Brand: Cloverdale Model: 38265 Part Number: 38265
Sold as each. Precoated with a heat activated glue. Apply with household iron. Peggable polybag. 3/4" x 25'. White. Manufacturer number: 38265. SKU #: 5005186. Country of origin: United Kingdom. Distributed by Cloverdale Company, Inc. | *$5.25 |
 | Cloverdale 40250 Band-It ProPak Edging
Brand: Cloverdale Model: 40250 Part Number: 40250
Coordinated edge banding is precoated with a heat activated glue for a permanent bond. Wood veneer edge banding rolls are finger jointed. Grain will be in matched when finger jointed. Just iron on. 3 4" x 250' roll. No. 40210: Red oak No. 40250: White bir | *$39.51 |
 | Columbus McKinnon Heavy-Duty Rope Hoist - 450-Lb. Capacity With 1/2In. Rope, 2 7/8In. Sheave Diameter
Brand: CM
All-steel rope hoist has steel blocks, steel sheaves and wire-formed steel swivel hooks top and bottom. Locks the load at any height, with self-locking block and tackle for light-duty lifting. Includes 50-ft. rope. Limited lifetime warranty. | *$99.99 |
 | 1/2 Ton Cm Hurricane Chain Hoist with 8' Lift
Brand: CM Model: 5600 Part Number: 5600
'The CM Hurricane hand chain hoist is an economical, high-quality, rugged unit with features unique to a hoist of this class. Designed with fewer parts to assure long life and minimal maintenance, this hoist can be used to lift loads in numerous industrial, construction and commercial applications. Unique single disc brake design does not incorporate a ratchet pawl or pawl springs as do other hand chain hoists. Fewer parts means less wear and low maintenance. Handwheel cover rotates 360 degrees for hoist operation in any direction. Ideal for special rigging applications. Frame and housings are made from impact resistant, stamped steel for long life, with powder coated finish for corrosion protection. All internal gears and pinions are heat treated steel, high quality bushings and sealed ball bearings are used throughout. Chain guide and stripper assure load chain alignment. Precision 4-pocket liftwheel, fully machined for better chain fit and reduced wear. Hardened steel chain, high strength forged upper and lower hooks with heavy duty cast steel latches. Minimal maintenance -- easily disassembled, requiring no special tools. 5-year warranty against defects in materials and workmanship. Meets ASME B30.16 Overhead Hoist Standard and European CE Standard. Metric Rated. Specifications: Rated Capacity: 1/2 Ton; Standard Lift (Can be supplied with other lifts): 8'; Hand Chain Pull to Lift Rated Load: 47 lbs.; Hand Chain Overhaul to Lift Load 1 ft.: 30' | *$189.00 |
| Hoists - Chain Hoist, 1 Ton With 8
Brand: CM Hoist Part Number: 5604
Hoists - Chain Hoist, 1 Ton With 8 | *$155.06 |
 | N48 2" x 2" x 1" Block, Package of 1 Rare Earth Neodymium Magnets
Brand: Cms Magnetics
Rare earth magnets are the strongest type of permanent magnet currently made. They are amazingly powerful for their size and have innumerable uses. These magnets are 2 inch x 2 inch x 1 inch block. They are composed of grade 42 neodymium iron boron magnetic material and are plated in nickel-copper-nickel for a shiny corrosion resistant finish. Their individual pull force is approximately 218 lbs. | *$28.45 |
 | Neodymium Rare Earth Magnet-1" Cube Grade N50
Brand: CMS Magnetics Model: NB0205-50NM Part Number: NB0205-50NM
Neodymium magnets are the strongest magnets ever made. The strength of the magnet is decided by numbers. The higher the number, the stronger the magnets. For example, N50 is stronger than N48 and N48 is stronger than N40, etc. This 1" cube is super powerful, it can lift 115 lbs of weight off the ground! The power is amazing for the size!
Be cautious, this item is not a toy. Don't give to kids under 12 years old. | *$22.98 |
 | 12 volt 6000 lb Electric Winch Tool Car ATV Truck Boat
Brand: CMT Part Number: 10175
This 2000 lb. to 6000 lb. Capacity Electric Winch is perfect for car, truck, ATV orothe light duty automotive use. Our unit features: * 12 Volt DC, 25 amp motor * 6000 pound pulling capacity for rolling stock, 2000 pound capacity for dead weight, 5000 pou | *$54.99 |
 | 48" High Lift 3 1/2 Ton Farm Truck and Tractor Jack
Brand: CMT Part Number: 7324V
48" high lift truck, tractor vehicle jack.Our 48" jack is perfect for vehicle that require higher lift capacity. * Solid steel construction * Maximun lift height: 48" * Maximum load: 3 1/2 tons (7000 lbs.)Minimum lift height: 6" * Perfect for farm vehicle | *$38.99 |
| | CMT RCS-003 Holding Frame, Kitchen Door
Brand: CMT Model: RCS-003 Part Number: RCS-003 | *Too low to display |
| | CMT RCS-004 Holding Frame, Door Rail
Brand: CMT Model: RCS-004 Part Number: RCS-004 | *$28.40 |
| | CMT RCS-005 Holding Frame, Drawer
Brand: CMT Model: RCS-005 Part Number: RCS-005 | *$12.50 |
| | CMT RCS-006 Holidng Frame, Corner Design
Brand: CMT Model: RCS-006 Part Number: RCS-006 | *$19.50 |
| | CMT RCS-007 Holding Frame, Rosette
Brand: CMT Model: RCS-007 Part Number: RCS-007 | *$12.50 |
 | 7-in-1 Multi-Function 12' Aluminum Ladder - 300 LB Capacity
Brand: CMT Industrial
*One ladder that performs at least 7 different functions--yet fits in the trunk of your car!*Strong high-quality all-aluminum construction; lightweight (weighs just 26 lbs), rustproof*Use as traditional 6' step or 12' extension ladder plus scaffold, stair scaffold and more*3 multi-position articulating hinges allow 18 different configurations*Positive safety locks, wide-stance top bottom with rubber protective pads. One-year warranty.We think this is the 'Swiss Army Knife' of ladders because it performs so many different ladder, scaffolding and platform functions: step ladder, double step ladder, extension ladder, mezzanine ladder, multi-level ladder, platform scaffold, stair-step scaffold. Dual-direction rungs, 18"-wide top and bottom braces with non-marking rubber feet for stability. Folds compactly to 36 x 14" for easy storage in car trunk or small corner in garage. Ladder comes assembled--just attach top and bottom braces with included hardware. | *$77.99 |
 | Heavy-Duty Folding Aluminum Hand Truck - 200 LB Capacity - Weighs Just 8 Lbs!
Brand: CMT Industrial
*Folds small enough even for air travel, tough enough to carry 200 pounds of cargo!*Extended, it's an easy-to-maneuver 40"H x 18"W hand truck with large 18" x 10" toe plate *Retract the handle, lift the toe plate - wheels fold automatically - and it shrinks to 28" x 2"*Lightweight (8 lbs), highly durable and non-corroding aircraft aluminum construction*Large 7" x 1-1/2" rubber wheels for smooth, quiet (and fast) travel; comfort-grip handleWe were a little skeptical this great-looking, whiz-bang folding cart could actually lift 200 lbs so we put it to the test. We recruited one of our healthy, young warehouse workers who weighs 180 lbs (or so he claims) to stand on the front edge of the toe plate. Since the toe plate acts as a lever when lifting cargo, having his weight centered on the outside edge requires much more structural strength than lifting weight properly placed toward the back (nearer the fulcrum of the lever). We were able to lift our volunteer with no complaints from the cart and we're confident it can handle the stated 200 lbs of lifting capacity. Perfect for home, office or job site - anywhere you need to move heavy loads with minimal effort. Overall dimensions: 39-3/4" height x 18-1/2" width x 18" depth extended, 27-3/4"H x 18-1/2"W x 2"D folded; 8.16 lbs net weight. | *$47.85 |
