 | 1 1/2 IN Dia WALNUT Rosette
Brand: Restoration Center
Turned Wood Rosette Walnut 1 1/2 dia | *$2.45 |
 | Knotty Pine Veneer - 2' x 8'
Brand: Restoration Center
Knotty Pine Flexible Paper-Backed Veneer1/64"thick Veneer bonded to 10mm non-woven fiber backing. | *$48.96 |
 | Decorative Molding 3/16" - Maple
Brand: Restoration Center
MAPLE DECORATIVE MOULDING
Overall: 3/16"wide x 3/16"thick
Sold by the Lineal Foot
Please Note: Trim and Beading Lengths vary from 12" and up. Pieces 3 feet and longer will be cut to no less than 18" lengths for shipping. Maximum Shipping Length is 6 Feet. A $2.50 Service Charge is added to the Freight Charges for shipment of lengths from 3' to 4'. A $6.00 Service Charge is added to lengths over 4'. Please specify lengths needed when ordering as longer lengths are not always available. | *$1.55 |
 | 5/8 IN Oak Plugs-Tapered Round Head
Brand: Restoration Center
Tapered Round Head Without Shoulders Turned End Grain Oak 5/8" dia 50 pieces. | *$6.25 |
 | Red Oak Quarter Cut Veneer - 2' X 4'
Brand: Restoration Center
Red Oak FLEXIBLE PAPER BACKED QUARTERED with FLAKE VENEER
Flexible Veneer consists of 1/64"thick real wood veneer permanently bonded under heat and pressure to a 10 millimeter non-woven fiber backing, allowing it to be applied to curved surfaces. It can be applied to almost any substrate, including metal, plywood, particle board, etc. This veneer finishes like any other real wood and can be lightly sanded, sealed, stained, filled, and finished with top coats. | *$32.00 |
 | 1/2 IN Walnut Screw Hole Buttons
Brand: Restoration Center
Round Head Buttons With Shoulders Turned End Grain Walnut 1/2" dia 50 pieces. | *$4.59 |
 | 5/8 IN Oak Flat Top Plugs
Brand: Restoration Center
Turned End Grain Tapered Flat Top Oak 5/8" dia 50 pieces. | *$4.95 |
 | 3/8 IN Walnut Flat Top Plugs
Brand: Restoration Center
Turned End Grain Tapered Flat Top Walnut 3/8" dia 50 pieces. | *$5.95 |
 | Decorative Molding Oak 6'
Brand: Restorers Affiliate Part Number: 2-0516 6'OAK
Nothing gives furniture or cabinetry that truly custom look more quickly than the addition of one of our select decorative oak moldings. Try some and you'll be amazed how easy it really is to "upgrade" your next project! | *$7.49 |
 | Basement Pole Cover Paint Grade 8'
Brand: Restorers Affiliate Part Number: PAINT GRADE
Do you want to finish a basement area but need to cover those ugly steel support posts? This basement pole cover fits the bill beautifully and is easy to do! The pole cover comes in 2 pieces with biscuit joints cut in the edges. Select the correct spacer to fit between the pole and cover, then apply glue to the edges, put the 2 halves together and clamp with the cable ties included. The pole cover comes 8' long with top and bottom trim collar. Will work on poles 3" to 4" in diameter. Paint to match your room decor. | *$169.99 |
 | Retraact-It 9500 EZTV Flat Panel Monitor Tiltable Wall Mount for 12-to-23-Inch Monitors, Silver
Brand: Retraact-It Model: 9500 Part Number: 9500
If you're tired of complicated products, that are too confusing to assemble and install, then this LCD TV and Flat Panel Monitor wall mount is a great solution for you! This LCD monitor mount is so easy to install, you will be enjoying your newly wall mounted LCD monitor or television in very little time at all! Just find and mark the center of a wood stud in your wall, screw in the flat panel TV wall mount, and attach it to your LCD television set or monitor. This flat panel TV wall mount even gives you the option of a fixed or tilted position. It comes with a top leveling system that allows you to make adjustments, and a bottom locking system for security. This LCD monitor wall mount is made of heavy-duty steel, with a durable silver powder coated finish. Available in two sizes: Item #118364 fits 12" to 23" monitors and television sets, and has a 90-lb. weight capacity. Item #118365 first 23" to 32" monitors and television sets, and has a 90-lb. weight capacity. Assembly level/degree of difficulty: Easy. | *Too low to display |
 | Retraact-It 9600 EZTV Flat Panel Monitor Tiltable Wall Mount for 23-to-32-Inch Monitors, Silver
Brand: Retraact-It Model: 9600 | *$19.99 |
 | Retraact-It 9700 EZTV Universal LCD/Plasma Tiltable Wall Mount for 32-to-61-Inch Monitors, Silver
Brand: Retraact-It Model: 9700 Part Number: 9700
If you're tired of complicated products, that are too confusing to assemble and install, then this Universal Plasma and LCD TV mount is a great solution for you! These plasma and LCD TV wall mount brackets fit most LCD and plasma TV's 32" to 61" wide. It's so easy to install, you'll be enjoying your wall mounted television in very little time! Constructed of heavy duty steel, with a durable powder coat finish, the LCD TV tilt wall mount can hold a maximum of 200 pounds! This flat panel TV wall mount even gives you the option of a fixed or tilted position. It comes with a top leveling system that allows you to make adjustments, and a bottom locking system for security. Assembly level/degree of difficulty: Easy. | *Too low to display |
 | Retraact-It 9800 Universal 3-In-1 LCD Television Mount
Brand: Retraact-It Model: 9800 Part Number: 9800
Display your small LCD television set or computer monitor like a work of art on the wall with this heavy duty flat panel TV wall mount! This LCD TV mount fits monitors and TV sets measuring 12"-31" wide. The TV wall mount bracket features multiple articulating positions from fixed, 5 or 10 degree tilt positions, and 150-degree swivel and tilt. The versatility of positions makes the wall mount bracket ideal for mounting a flat panel TV set in an area like the kitchen, where you may want to angle it depending on where you're standing. This swivel TV mount is Vesa compliant 50mm, 75mm and 100mm. The maxium weight it can hold is 70 pounds. The wall mounting bracket is constructed of high quality steel with a durable powder coat finish. Comes fully assemble and is easy to install! Assembly level/degree of difficulty: No Assembly Required. | *$20.99 |
 | Collated Subfloor Screw, #2 x 2"
Brand: Rex Part Number: SCS8200
50 screws per flat strip. Thread; Coarse 2/3 with wax ; Yellow Zinc finish. BFits Tools:/B D550-18V [I632865/I], DCF5000 [I632820/I], D600-AC,[I632919/I] | *$23.52 |
 | Ridgid 56672 Roller Head High Pipe Stand
Brand: Ridgid Model: 56672 Part Number: 56672
Vises And Stands - Plumbing Tools Brushes Vise Type: Adjustable Pipe Stand w/2 Roller Head Maximum Pipe Capacity: 12 | *$92.44 |
 | Ridgid 56682 Conveyor High Head Pipe Stand
Brand: Ridgid Model: 56682 Part Number: 56682
Vises And Stands - Plumbing Tools Brushes Vise Type: Adjustable Pipe Stand w/Conveyor Roller Head Maximum Pipe Capacity: 12 | *$130.94 |
 | Sjoberg 995-1000 Nordic Plus 1450 Workbench
Brand: Robert Larson Model: 995-1000 Part Number: 33448
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Based upon the latest SJOBERGS design, the Nordic Plus series gives you the size you need at a price you can afford. The bench top is constructed in hard Nordic Birch. The amazing versatility of vice location permits left or right handed use, clamping on both ends or dual clamping on the front. All of the wood in the bench is FSC certified which guarantees forestry renewal. The hard Nordic birch top is built to last for a lifetime of normal use. Supplied with four steel bench dogs with a plastic coating to protect your edge tools. There is a double row of 3/4" clamping holes working from each of the four vise locations, giving an endless opportunity to clamp your work! All three benches are 33-1/2" high, 19-5/8" wide, have a 1-1/8" top thickness at the center and a 2-3/4" thick skirt. Vises open 4-1/2". These benches are available with or without a storage cabinet. | *$429.99 |
 | Sjoberg 995-1250 Nordic Plus 1660 Workbench
Brand: Robert Larson Model: 995-1250 Part Number: 33449
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Based upon the latest SJOBERGS design, the Nordic Plus series gives you the size you need at a price you can afford. The bench top is constructed in hard Nordic Birch. The amazing versatility of vice location permits left or right handed use, clamping on both ends or dual clamping on the front. All of the wood in the bench is FSC certified which guarantees forestry renewal. The hard Nordic birch top is built to last for a lifetime of normal use. Supplied with four steel bench dogs with a plastic coating to protect your edge tools. There is a double row of 3/4" clamping holes working from each of the four vise locations, giving an endless opportunity to clamp your work! All three benches are 33-1/2" high, 19-5/8" wide, have a 1-1/8" top thickness at the center and a 2-3/4" thick skirt. Vises open 4-1/2". These benches are available with or without a storage cabinet. | *$479.99 |
 | Sjoberg 995-1500 Nordic Plus 1950 Workbench
Brand: Robert Larson Model: 995-1500 Part Number: 33450
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Based upon the latest SJOBERGS design, the Nordic Plus series gives you the size you need at a price you can afford. The benchtop is constructed in hard Nordic Birch. The amazing versatility of vice location permits left or right handed use, clamping ends or dual clamping on the front. All of the wood in the bench is FSC certified which guarantees forestry renewal. The hard Nordic birch top is built to last for a lifetime of normal use. Supplied with four steel bench dogs with a plastic coating to protect your edge tools. There is a double row of 3/4" clamping holes working from each of the four vise locations, giving an endless opportunity to clamp your work! All three benches are 33-1/2" high, 19-5/8" wide, have a 1-1/8" top thickness at the center and a 2-3/4" thick skirt. Vises open 4-1/2". These benches are available with or without a storage cabinet. | *$529.99 |
 | Sjoberg 995-2000 Nordic Plus Cupboard
Brand: Robert Larson Model: 995-2000 Part Number: 33374
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. Based upon the latest SJOBERGS design, the Nordic Plus series gives you the size you need at a price you can afford. The Nordic storage cabinet features include two sliding doors with access to a large 24-1/4" x 15" x 15" open cabinet and four drawers measuring 3-1/2" x 12-1/4" x 12-1/4" each. Entire case measures 38-3/4" x 18" x 17-5/16". Includes a new set of stretchers. Assembly required. | *$159.99 |
 | Sjoberg 995-5100 Holdfasts for Nordic Plus/Duo Workbenches, 2-Pack
Brand: Robert Larson Model: 995-5100 Part Number: 995-5100 | *$36.99 |
 | Sjoberg 995-5200 3/4-Inch Steel Bench Dogs for Nordic Plus/Duo benches, 4-Pack
Brand: Robert Larson Model: 995-5200 | *$39.99 |
 | Sjoberg 995-6100 (33635) 1-Inch Holdfast
Brand: Robert Larson Model: 995-6100 Part Number: 33635
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. The Elite series of workbenches is smarter and heavier than any alternatives on the market anywhere! The Elite 1" holdfast is an extra heavy duty holdfast that fits in any dog hole or leg hole on the Elite series benches. Great for holding large panels. | *$54.99 |
 | Sjoberg 995-6300 Anvil
Brand: Robert Larson Model: 995-6300 Part Number: 33620
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. The Elite series of workbenches is smarter and heavier than any alternatives on the market anywhere! A Steel Anvil (two L-shaped vise liners) is also available to protect your vise when clamping small metal parts. | *$92.50 |
 | Sjoberg 33181Rubber Jaw Protectors for Elite Workbenches, 2-Pack
Brand: Robert Larson Model: 995-6400 Part Number: 33181 | *$86.99 |
 | Sjoberg 995-6500 Vise for Elite Workbenches
Brand: Robert Larson Model: 995-6500 Part Number: 33461
SJOBERGS of Sweden has been manufacturing top quality workbenches for over 80 years. Their entire product line of workbenches was designed to meet the needs of a modern day woodworker and to take advantage of the latest manufacturing techniques. The range of features is truly amazing and cannot be matched by any other manufacturer. The Elite series of workbenches is smarter and heavier than any alternatives on the market anywhere! Increase the capacity and flexibility of your Elite Series Bench by adding another vise. Fits any of the six vise positions located around the bench. | *$249.99 |
 | Roberts Harmony 3 in 1 Underlayment
Brand: Roberts
A 100 square foot roll of premium 3-in-1 underlayment for use under all laminate and engineered floating floors. Harmony provides the moisture barrier, sound reduction and cushioning required for proper installation in a single 3-in-1 product. Unique construction creates a pocket of constantly circulating air which inhibits mold growth. Ideal for condos, basements, and multii-level dwellings. Comes with an 8 inch overlap with an adhesive strip for easy installation.
Both tests measure sound transference from an upper level room to a lower level room. The IIC measures sound such as moving furniture and walking, while the STC measures sound
such as voices and television. Minimum sound rating required by most building codes and architects is 50.
*Compression Test Results
In a standardized test using 1,320 lbs. of pressure, Roberts Harmony Underlayment retained 96% of its original thickness after seven days, compared to only 57% by a leading 2-in-1 foam product. | *$26.99 |
 | Roberts Protect-it Self Adhering Carpet Film 24" x 200'
Brand: Roberts
Protect-ItTM Temporary Carpet Protective Film, to its line of flooring specialty tools. A clear, self-adhering film, Protect-It provides up to 30 days of temporary protection for all types of carpeting. This product is great for professional builders, remodelers, painters and anyone looking to protect their flooring from damage. This 3 mil film is thick enough to stand up to tough worksite conditions and is reverse wound for easy application. | *$29.99 |
 | Roberts #10091 Handheld Tile File
Brand: Roberts Part Number: 10091
Handheld Tile File, Grit Edge Carbide File, Sands Smooths Rough Edges On Ceramic Tile. | *$14.95 |
 | Q.E.P./Roberts 1408-2 Urethane Wood Floor Adhesive
Brand: Roberts Part Number: 1408-2
2 gallon 100% solids, moisture cure urethane adhesive, high green strength formula. For use on prefinished solid plank, flat milled shorts, bamboo, parquet, 3 and 5 ply engineered plank, and plywood. It can also be used to install ceramic tile, marble, an | *$58.67 |
 | Q.E.P./Roberts 1408-5 Urethane Wood Floor Adhesive
Brand: Roberts Part Number: 1408-5
5 gallon. 100% solids, moisture cure urethane adhesive, high green strength formula. For use on prefinished solid plank, flat milled shorts, bamboo, parquet, 3 and 5 ply engineered plank, and plywood. It can also be used to install ceramic tile, marble, a | *$139.67 |
 | ROBERTS 10-230-40 CARPET STRETCHER CASE WITH WHEELS
Brand: Roberts Model: 10-230-40
EMPTY STRETCHER CASE WITH 4" WHEELS HOLDS STRETCHER UNIT, TAIL BLOCK WITH WHEELS, THREE 3 FT EXTENSION TUBES, ADJUSTABLE LOCKING TUBE AND TRANSFER TUBE (NYLON WEB BELT WITH QUICK RELEASE BUCKLE INCLUDED) | *$70.99 |
 | Roberts #10025-6 Grout Saw Replacement Blade
Brand: Roberts Model: 10025-6 Part Number: 10025
Professional Carbide Grout Saw Replacement Blade Set, Includes: 1 Grit Edge 1 Steel Edge. | *$2.00 |
 | ROBERTS/Q.E.P. CO INC 10091 CERAMIC MARBLE FILE
Brand: Roberts Model: 10091 Part Number: 10091
"ROBERTS/Q.E.P. CO. INC." CERAMIC MARBLE FILE
Handheld tile file.
Comfortable cushion grip handle.
Excellent for saltillo tile.
Carbide dual grit filing surfaces.
Smooths and shapes marble, stone and ceramic tile edges.
Fine grit for minor smoothing, course grit for smoothing harder surfaces. | *$14.59 |
 | Roberts 10-645 Calcium Chloride Moisture Test Kit
Brand: Roberts Model: 10645
For measuring moisture vapor emission rate and surface
Complies and or exceeds ASTM F-1869 standard test method
Pack Contains: Anhydrous Calcium Chloride in plastic screw lid jar, Transparent air tight plastic cover, (2) pH alkalinity | *$19.99 |
 | Roberts #62900 4" Heavy Duty Scraper
Brand: Roberts Model: 62900 Part Number: 62900
4" Heavy Duty Scraper, Scrapes Subfloors Clean, Removes Paper Grout, Comes Complete With Blade Comfort Grip Handle, Replacement Blades For The 4" Heavy Duty Stripper. | *$6.34 |
 | Hardwood Assortment - Mixed species
Brand: Rockler
Perfect for small projects. Sizes range from 2" to 10" wide and 6" to 15" long. Thicknesses may include 1/2" , 3/4" and 1-3/4" pieces. brMixed species assortment contains 20 lbs. of at least 4 of the following species: Oak, Maple, Birch, Cherry, Walnut and Mahogany. br br | *$24.99 |
 | Baltic Birch Plywood - 1/2'' thick, 24'' x 30''
Brand: Rockler
The front, back and inner plies are quality one-piece plies. Highly decorative, exceptional strength and great screw holding power. May include matched face plugs. Plywood is Grade BB, (Both faces may contain patches, slight knot pattern and mineral streaks. The inner plies will contain some patches, but are relatively "void free"). | *$14.99 |
 | 13/16'' X100 ft Plastic T-Molding Black
Brand: Rockler
13/16" molding for laminated sheet goods. Wraps around a radius as small as 1-1/2". To fit a 90 degree corner, just clip the ribbing that fits the groove. Three ribs on the insert edge of the molding hold it securely in place. brbr brRequires a 5/64" kerf for installation. | *$42.29 |
 | 1/4'' Neatform Bendy MDF Sheet
Brand: Rockler
It's easy to make custom curves with this high-quality bendable sheet material, eliminating the hassle of steam bending or kerfing. Ideal for columns, counter fronts, wavy walls, ceilings and cabinet making. | *$19.99 |
 | Walnut - 48'' x 10'' Dimensional Veneers- No Backing
Brand: Rockler
Save time and money! 48" long veneer. When you buy this veneer, there is no waste because it has straight, parallel edges and no defects. Unfinished real wood with no paper backing. Accepts stains and finishes. Grains run lengthwise. Approximate sizes usually run about 1/2" over. All dimensional veneers are plain sliced unless otherwise noted. brbr brNOTE: Because of special handling requirements, there is a two sheet minimum order for this product. | *$5.69 |
| Maple - 36'' x 6'' Dimensional Veneers- No Backing
Brand: Rockler
Face grade veneer sheets with no backing material. Veneer has straight, parallel edges and no defects. Approximate sizes usually run about 1/2" over. All dimensional veneers are plain sliced unless otherwise noted. Grain runs lengthwise. Veneers are from 1/40" to 1/28" thick. 36" long. brbr brNOTE: Because of special handling requirements, there is a two sheet minimum order required for this product. | *$3.79 |
 | Bolivian Rosewood by the Piece, 1/4'' x 3'' x 24''
Brand: Rockler
Also known as "Pau Ferro," Bolivian Rosewood features a deep, chocolate brown tone with hints of purple, interlaced with even darker brown or black growth lines. A dense, but easily worked species native to Central and South America, it has a scent reminiscent of Walnut. The grain varies from straight to irregular and the wood is oily to the touch. Often used for the curving sides of guitars, Bolivian Rosewood steam bends nicely and will take an exceptional finish. All boards are machined S4S, relieving your planer of excess work. You also won't have to worry about chipout, which is difficult to prevent when planing thin stock. Thin boards are ideal for edging, veneering, inlay, marquetry, sides for decorative boxes, bending stock, bent laminations and whatever else your imagination can dream up! br br brCommon Names: Bolivian Rosewood, Morado, Pau Ferro. brBotanical Classification: Machaerium scleroxylon brTree is Native To: Bolivia and Brazil. brAverage Dried Weight: 53 lb/ft. brAverage Specific Gravity: 0.85 brTexture ranges from coarse to fine. brBolivian Rosewood requires pre-boring for fasteners. brThe machinery dust from this species may cause severe skin irritation to persons with allergies. | *$12.49 |
 | 24'' x 24'' Pressure Sensitive Veneer - Teak
Brand: Rockler
Apply without mess or expensive tools! Unfinished real wood. Accepts stains and finishes. Straight grained. Grain runs the length of the roll. brbr brThis premium grade 1/64" thick flexible veneer comes with a 10 mil thick paper for stability and a pressure sensitive adhesive applied to its backside. Simply cut the veneer to size with a scissors, peel off the backing, and apply to the substrate. You can strengthen the bond between the veneer and substrate by applying pressure with a veneer smoothing blade. Pressure sensitive veneer permanently bonds to wood, glass, plastic and metal. Not recommended for use on fir plywood. It also accepts stains and finishes. | *$34.49 |
| Baltic Birch Plywood - 1/4'' thick, 24'' x 30''
Brand: Rockler
The front, back and inner plies are quality one-piece plies. Highly decorative, exceptional strength and great screw holding power. May include matched face plugs. Plywood is Grade BB, (Both faces may contain patches, slight knot pattern and mineral streaks. The inner plies will contain some patches, but are relatively "void free"). | *$9.99 |
 | Nashborough Poplar (paint grade) American Series Fireplace Mantel, 82-1/2'' Wide
Brand: Rockler
Our high quality mantel kits come with everything you need to assemble a mantel as easy as 1-2-3! Each mantel is carefully crafted to give years of beauty, durability and style to your home.br brThese American Series mantels come with 82-1/2" to 87-1/2" wide shelf; surrounds (breastplate and two sides); three adjustable trim molding scribes to fit from 48" to 58" wide openings; pilasters with blocks; and all ornamental moldings. Standard dimensions are 58" opening width x 42" opening height. br brNashborough has dentil molding detail on shelf and unique offset leg detail. | *$499.99 |
 | Starter Wood Veneer Kit
Brand: Rockler
Small pieces of veneer for small repairs. This Starter Veneer Kit contains 25 square feet of assorted raw veneers: Birch, Oak, Cherry, Walnut, and Mahogany. Random sizes 3" to 8" wide and 24" to 36" long. A perfect assortment for veneer repairs on smaller pieces of furniture. Thicknesses may vary from 1/32" to 1/28". Accepts stains and finishes. | *$24.99 |
 | 13/16 X 50 ft Iron Edge Birch
Brand: Rockler
If you can iron you can apply Edgemate! Just position edge banding and heat with either our hand held iron or edge banding machine. The backing creates a permanent bond. Then simply cut and trim edging to make plywood look like solid stock. Accepts stains and finishes. | *$19.99 |
| Baltic Birch Plywood - 3/8'' thick, 24'' x 30''
Brand: Rockler
The front, back and inner plies are quality one-piece plies. Highly decorative, exceptional strength and great screw holding power. May include matched face plugs. Plywood is Grade BB, (Both faces may contain patches, slight knot pattern and mineral streaks. The inner plies will contain some patches, but are relatively "void free"). | *$11.99 |
