 | Wesco Self-Propelled Battery Powered Platform Truck 24x48 1100 Lb. Cap.
Brand: Wesco Part Number: 272414
WESCO SELF-PROPELLED BATTERY POWERED PLATFORM TRUCK Electric Powered Platform Truck Does All Of The Hard Work For You! Powered drive deck truck handles all sorts of loads in retail stores, warehouses and offices. Powerful 370W drive motor with a Curtis 110 amp controller allows unit to operate at 2.4 mph when unloaded, 1.9 mph when fully loaded, and offers a maximum climbing incline of 8176;. Fingertip variable speed controller features simple forwardreverse operation and unit stops automatically when trigger is released. Automatic beeper alarms operator when in reverse for safety. Two 12V 40 AH batteries offer 6 hours of continuous use and integral charger allows full recharge in 7-8 hours. Non-skid vinyl deck surface helps retain cargo. Emergency stop, keyed lock, illuminated battery status indicator and full perimeter deck bumper guard are standard. Rolls smoothly on two 5 rubber steer wheels and two 10 pneumatic load wheels. | *$1,369.00 |
 | Wesco Folding Handle Liftkar Hd Stair Climbing Appliance Truck 725 Lb. Capacity
Brand: Wesco Part Number: 274101
WESCO FOLDING HANDLE Liftkar® POWERED STAIR CLIMBING APPLIANCE TRUCK Battery Powered Stair Climbing Hand Truck Provides Safer, Faster Deliveries On Stairs! Liftkar® battery operated hand truck reduces the force needed to move loads up and down indoor or outdoor stairs, decreasing the risk of back injuries and workers' compensation claims. Innovative edge-of-step braking system automatically applies brakes when the wheels are at the edge of the step, helping to prevent loss of load control caused by accidental rolling down the stairs. Brake system can be shut off for use on level ground. Powered truck offers Continuous Climb mode or Single Step mode that allows the operator to ascend or descend by pressing the button after each step for maximum control. Twin control buttons allow left or right hand operation and offer two climbing speeds (6 steps or 10 steps per minute). Quick-change 24 volt sealed maintenance-free battery pack and remote charger offer the following full-charge performance: Weight Lbs. of Steps 725 120 550 190 440 220 Lightweight dual-rail aluminum frame and a 21"W x 7-¼"D extruded aluminum noseplate are constructed for years of service. Ergonomically designed handles have non-slip rubber coating for maximum comfort. Safety cargo strap is included. Foam-filled 10-¼" wheels are puncture proof and are ideal for rough surfaces like gravel or cobblestone. Folding Handle trucks upper handle angle can be adjusted allowing the user to stand upright. Best for copiers, safes, heavy motors and other loads that would require the user to pull the load back to a very low position. | *$4,629.00 |
 | Superlite Folding Truck (WES220617) Category: Platform Trucks
Brand: Wesco Part Number: WES 220617
Item #: WES220617. Lightweight aluminum construction: weighs less than 9 lbs., yet holds up to 175 lbs. Elastic straps secure the load. Easily opens and closes: pushbutton handle release. Smooth release for nose plate and wheels. 7" nonmarking wheels lock in place. Ample 19w x 12d nose plate. 19w x 2d x 29-1/2h (folded). 19w x 19d x 42h (extended). brCustomers also search for: Superlite Folding Truck - Material Handling Platform Trucks | *$119.89 |
 | WESCO LEXCO Folding Hand Trucks
Brand: Wesco Model: 220617 Part Number: 220617
Includes elasticized cord to secure loads. WESCO LEXCO Folding Hand Trucks store out-of-the-way until you need them again. Fold down quickly and easily. Choose either lightweight aluminum/poly models or durable all-steel construction. | *$94.95 |
 | Wesco Mini Mover Folding Luggage Cart, Capacity of 110 Pounds.
Brand: Wesco Model: mini mover Part Number: 220646
Mini Mover - Compact version of Wesco's highly successful Superlite folding truck. With the push of a button, the frame extends and the noseplate and wheels move into working position. Elastic straps for securing load. Non-marking, shock absorbing rubber tread wheels. Lightweight aluminum construction (7.25 lbs.). Folds to a compact 24" x 15.25" x2" for transport and storage. | *$58.18 |
 | Ceiling Fan Light Medallion
Brand: Westinghouse Model: 77028 Part Number: 7702800
Lightweight, durable, easy-to-install. Use above the canopy of a ceiling fan to add a decorative element. Install unfinished or finished in a number of ways including painting or staining. | *$8.36 |
 | Westinghouse Lighting 77035 Ceiling Medallion
Brand: Westinghouse Model: 77035 Part Number: 77035
For use with ceiling fans and light fixtures. Helps cover hole cut for electrical box, or for decorative enhancement. 1 piece design, install at same time as fixture or fan for best results. Can be painted to match room decor. White. No. 77037: 10" No. 77 | *$8.50 |
 | Contempo Medallion, 10"
Brand: Westinghouse Model: 77037 Part Number: 7703700
Lightweight, durable, easy-to-install. Use above the canopy of a ceiling fan to add a decorative element. Install unfinished or finished in a number of ways including painting or staining. | *$6.99 |
 | Westinghouse 77774 Addison Medallion, Two-Piece Design, 18- 3/4 Inch Width, White
Brand: Westinghouse Model: 77774 Part Number: 77774
16", 2 Piece, Addison Design Medallion, White Finish, Lightweight Polyurethane Material Will Not Warp, Split, Or Splinter When Drilled Or Screwed, Easily Installs Around An Existing Ceiling Fan Or Light Fixture, No Need To Remove The Ceiling Fan Or Light Fixture, Seamless Installation, Can Be Painted Or Left Unfinished, 5-1/2" Center Hole, Fits Standard Canopies, Three 1-1/2" Drywall Screws Included, Boxed. | *$31.51 |
 | Westinghouse 77775 Avery Medallion, Two-Piece Design, 19-Inch Width, White
Brand: Westinghouse Model: 77775 Part Number: 7777500
Westinghouse Lighting 77775 You won't find anything more simple or elegant than the 19" Avery two-piece ceiling fan medallion. Its innovative two-piece design allows you to easily install around an existing ceiling fan or lighting fixture, and its absolutely gorgeous design will have your ceiling fan looking more beautiful than ever! Features: -19" two-piece polyurethane ceiling fan medallion - 5 1/2" center opening -Includes (3) 1 /12" drywall screws for mounting -Overall dimensions: 19" Dia | *$49.00 |
 | Westinghouse #77037 10" White Ceiling Medallion
Brand: Westinghouse Lighting Corp Model: 77037 Part Number: 77037
10" White Ceiling Medallion, Contempo Wood Style, Carded. | *$6.50 |
 | Weston Boat Dolly
Brand: Weston Part Number: 31-0201-W
Have trouble moving your small boat or dingy around the yard or beach house? Get a Weston Gear Boat Dolly today!!!brbrThis Boat Dolly is simple to use. Just clamp it to your boat transom, flip the boat with keel side up and roll it wherever you wish. It's constructed of rugged, 1" zinc-plated steel, and it has Dual 7" rubber wheels on a 1/2" zinc-plated steel axle. Great for use at your Beach house, cottage or at home. Moves up to 250 pounds.brbrbr / 16" Wide x 18" Tallbrbrbr / Net Weight: 11 Lbs. | *Too low to display |
 | Pliers,Bent Nose,6in Westward 5MX94
Brand: WestWard Tools Model: 5MX94 Part Number: 5MX94
Bent Nose Pliers, Length 6 Inches, Solid Joint, Vinyl Grip | *$6.83 |
 | Wicanders Seville XTEC Cork Flooring Sample, Marble Butternut
Brand: Wicanders Model: WIBL43001XMAILSAM | *$4.95 |
 | 12"x12" Vacuum Form Machine - Plastic Former for Model, Mold, and Prototype Forming
Brand: WidgetWorks Unlimited Model: 12x12 Table Top Vacuum Fo Part Number: 12x12 Table Top Vacuum Fo
Our 12"x12" Table Top Vacuum Former is perfect for small businesses and hobbyists who want to create parts in plastic up to 1/8" thick. Produce intricate shapes with results that rival expensive commercial machines in their incredible accuracy and detail: prototypes, custom packaging, RC car bodies, model rocket nose cones, molds for plaster or concrete, chocolate and candy, candles, and soap making. Our 12"x12" Vacuum former includes a perforated aluminum vacuum platen (the top surface that delivers the vacuum under the hot plastic) that is computer designed and precision CNC machined to maximize air flow and eliminate unnecessary volume - both critical to rapid air evacuation and professional vacuum forming results. Detailed, step-by-step instructions along with sources for vacuum formable plastics are included. Compatible with all types of thermoform plastic: ABS, Acrylic (Plexiglas), Butyrate, PET-G, Polycarbonate (Lexan), Polyethylene, PVC, Styrene, Vinyl, etc. Requires house hold oven and Shop-Vac style vacuum cleaner with 1 1/4" hose/adapter. Vacuum Forming Explained in 3 Easy Steps: Step #1: Secure your plastic between the vacuum former's metal frames. Attach your Shop-Vac (not included) to the vacuum former. Place your model on top of the perforated aluminum vacuum platen. Step #2: Place the plastic in your kitchen oven and watch as it becomes soft and begins to sag. Align the metal frames with the vacuum former's guides and lower the plastic over your model. Step #3: The hot plastic forms an air tight seal around the vacuum platen's edges. Vacuum pressure pulls the hot plastic down around the model. After cooling for a few seconds the plastic part is complete. | *$99.95 |
 | 12"x18" Vacuum Form Machine - Plastic Former for Model, Mold, and Prototype Forming
Brand: WidgetWorks Unlimited Model: 12x18 Table Top Vacuum Fo Part Number: 12x18 Table Top Vacuum Fo
Our 12"x18" Table Top Vacuum Former is perfect for small businesses and hobbyists who want to create parts in plastic up to 1/8" thick. Produce intricate shapes with results that rival expensive commercial machines in their incredible accuracy and detail: prototypes, custom packaging, RC car bodies, model rocket nose cones, molds for plaster or concrete, chocolate and candy, candles, and soap making. Our 12"x18" Vacuum former includes a perforated aluminum vacuum platen (the top surface that delivers the vacuum under the hot plastic) that is computer designed and precision CNC machined to maximize air flow and eliminate unnecessary volume - both critical to rapid air evacuation and professional vacuum forming results. Detailed, step-by-step instructions along with sources for vacuum formable plastics are included. Compatible with all types of thermoform plastic: ABS, Acrylic (Plexiglas), Butyrate, PET-G, Polycarbonate (Lexan), Polyethylene, PVC, Styrene, Vinyl, etc. Requires house hold oven and Shop-Vac style vacuum cleaner with 1 1/4" hose/adapter. Vacuum Forming Explained in 3 Easy Steps: Step #1: Secure your plastic between the vacuum former's metal frames. Attach your Shop-Vac (not included) to the vacuum former. Place your model on top of the perforated aluminum vacuum platen. Step #2: Place the plastic in your kitchen oven and watch as it becomes soft and begins to sag. Align the metal frames with the vacuum former's guides and lower the plastic over your model. Step #3: The hot plastic forms an air tight seal around the vacuum platen's edges. Vacuum pressure pulls the hot plastic down around the model. After cooling for a few seconds the plastic part is complete. | *$149.95 |
 | 2 1/4 Ton Trolley Jack w/Blow Molded Case (WLMW1611) Category: Floor Jacks
Brand: Wilmar Part Number: W1611
Item #: WLMW1611. pbFeatures Benefits:/bli4,500 lb. capacity/lili5-1/4 to 15-1/2 lift range brCustomers also search for: Tools and Storage\Automotive\Auto Lifting and Hydraulics\Floor Jacks Discount 2 1/4 Ton Trolley Jack w/Blow Molded Case, Buy 2 1/4 Ton Trolley Jack w/Blow Molded Case, Wholesale 2 1/4 Ton Trolley Jack w/Blow Molded Case, 039564124761, ToolWeb, Automotive Jacks | *$45.99 |
 | Wilmar (WLMW54032) Compact Mechanic's Shop Cart
Brand: Wilmar Part Number: W54032
pstrongFeatures and Benefits:/strong/pul liTwo shelf compact cart/li liConstructed of blow-molded plastic with metal frame/li liComplete with 2-1/2" casters/li liOverall dimensions: 23.5â wide x 16.5â deep x 29â high/li liHandy slide-out storage tray/li/ulpAssembly required./p | *$44.99 |
 | Performance W54025 Multi-Purpose Workbench
Brand: Wilmar Model: W54025 Part Number: W54025
pstrongFeatures and Benefits:/strong/pul liFolding design for compact storage/li liIncludes 4 bench dogs for odd shaped pieces/li liTabletop printed with grid, ruler and protractor for added convenience/li liIncludes tool storage rail/li li200 lbs. safe working load/li/ulpOverall size: 23-7/8â x 25â x 31â./p | *$29.32 |
 | Ohio State University Hard Hat
Brand: Wincraft Part Number: 2421811-O
Officially licensed hard hat with your favorite logo. These hard hats meet the requirements of OSHA as per ANSIZ89.1-1986 class A and B, and ANSIZ89.1-1997 Class G and E standards. Features adjustable headband for sizes 6 1/2" - 8". Provides tough, lightweight protection with a patented shock absorbing suspension. Packaged for easy display. Made in USA. | *$25.53 |
 | West Virginia University Hard Hat
Brand: Wincraft Part Number: 2426311-W
Officially licensed hard hat with your favorite logo. These hard hats meet the requirements of OSHA as per ANSIZ89.1-1986 class A and B, and ANSIZ89.1-1997 Class G and E standards. Features adjustable headband for sizes 6 1/2" - 8". Provides tough, lightweight protection with a patented shock absorbing suspension. Packaged for easy display. Made in USA. | *$25.53 |
 | Little Giant 15005 Wall Rack
Brand: Wing Enterprises Model: 15005 Part Number: 78992430
This rack is designed specifically for a Little Giant ladder system. It is composed of heavy-duty steel with a durable powder-coat finish, and the heavy-duty mounting plate with steel hanging brackets supports up to 75 lb.bProduct Features:/bulCompatible with a variety of Little Giant ladders, including Type I, Classic, Fiberglass Multi-use, Type IAA, Revolution XE and UltraStepDurable steel posts support up to 75 lb.Anchor screws are spaced 16" apart for easy attachment to wall studsStylish design includes a durable powder-coat finish for a professional look and out-of-the-way ladder placementIncludes mounting instructions and mounting hardware/ul(Model 15005) | *$29.95 |
 | SmartStraps RetractableTow Strap
Brand: WINSTON
NEW SmartStraps Retractable Tow Strap. Big toe, er Tow! Broke down. Stuck in the snow or mud. Need to yank out some roots? Whatever the task, rely on this beefy Tow Strap. Unlike others, this unit retracts. Yup, it automatically winds up. Eliminates jerking while towing, too. 14' in length; 3,000 lbs. safe-working capacity; 10,000 lbs. break strength.; Weighs 4 lbs. Got pull? Get the best Strap today! SmartStraps RetractableTow Strap | *$19.97 |
 | Square Edge Work Bench Top - Maple 72" W X 30" D X 2-1/4" Thick
Brand: WISCONSIN BENCH Part Number: BKSC780
MAPLE BENCH TOP Maple butcher-block bench top is kiln dried, electronically glued, then cured and sanded smooth. Finished with a penetrating mineral oil protectant. You can't buy a better all-purpose bench top. | *$292.95 |
 | Witten Automatic Vnt. 304LBL Automatic Foundation Ventilator
Brand: Witten Part Number: 304LBL
Automatically opens at 70 and closes at 40 (approximately). Fits standard 8" x 16" vent openings. High density thermo plastic construction with stainless steel metal parts. No electrical hook up. Heavy duty aluminum mesh screen front and back. 65 sq. in | *$8.60 |
 | Witten Automatic Vnt. 304LGR Automatic Foundation Ventilator
Brand: Witten Model: 304LGR Part Number: 304LGR
Automatically opens at 70 and closes at 40 (approximately). Fits standard 8" x 16" vent openings. High density thermo plastic construction with stainless steel metal parts. No electrical hook up. Heavy duty aluminum mesh screen front and back. 65 sq. in | *$8.58 |
 | Brown Auto Foundation Ventilator
Brand: Witten Model: 306MBR Part Number: B-E BROWN (MB)
Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression springwith 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. | *$11.54 |
 | Witten Automatic Vnt. 306MGR Automatic Foundation Ventilator
Brand: Witten Model: 306MGR Part Number: 306MGR
Automatically opens at 70 and closes at 40 (approximately). Fits standard 8" x 16" vent openings. High density thermo plastic construction with stainless steel metal parts. No electrical hook up. Heavy duty aluminum mesh screen front and back. 65 sq. in | *$9.64 |
 | Bug Off Instant Screen Door with Magnetic Closure for a Single or Sliding Door, 32" W x 80" H
Brand: Wolf Moon Products, Inc Model: 000322 Part Number: 32"
Enjoy year-round insect protection with the revolutionary walk-through, auto-close, Hands-Free Screen Door! The Hands-Free Screen Door is the solution for parties and barbecues, providing hands-free entry and exit for you, your family, guests, and pets. The magnetic auto-close feature automatically shuts the screen each time you walk through it. It fits French Doors and sliders, installs in apartments, rentals, and condos, making it a great alternative to expensive custom screens and annoying sliding screens that come off the track. The Hands-Free Screen is built with easy height and width adjustment, with 2 height adjust tunnels at the top allowing for installation on odd size doors. The screen has a maximum length of 80" and is designed to only fit standard door frames, 78" to 80". The space saving design rolls up for seasonal storage so you can bring it with to the vacation home or cabin. Get the Hands-Free Screen Door today for the most versatile, year-round insect protection and enjoy all of the great features, when and where you need them! Installs without tools (see zoom); won't damage door frames. Available in 3 sizes (30"w fits standard back doors, 32"w fits some back doors, and 36"w fits standard front doors and sliding glass doors). Made of high quality fiberglass mesh. Please see "Other Info" tab for installation images. The widths indicated are the maximum widths - if you have a 34" door, order the 36"" | *$33.99 |
| Bug Off Instant Screen Door with Magnetic Closure for a Single or Sliding Door, 72" W x 80" H
Brand: Wolf Moon Products, Inc. Part Number: 72"R
If you live in an apartment or condo that doesn't allow permanently fixed screen doors, or if you simply want a screen door that allows you to walk in and out of your home hands-free, look no further. This Bug Off Instant Screen Door mounts between door jambs on a french door frame; no tools or expertise is needed. It installs and uninstalls in minutes, making it the ideal choice for your home or for taking it with you on vacation. Once it has been setup, the attractive and durable screen door remains sealed with magnets, keeping pesky bugs and mosquitoes out and allowing the fresh air of the outdoors in. Whenever you, your children, guests or pets need to go in our out, just walk through the screen and it will open right up and once you are through, the center and bottom magnets will snap together closing the screen behind you. No more screens left open and no more slamming doors. The Bug Off Instant Screen door can be used year-round, or temporarily, when and where you need it, as the space saving design allows for easy storage. Take it from door to door, to your vacation home, or store it away at seasons end. | *$53.77 |
 | WOLF GARTEN Fruit Picker
Brand: WOLF GARTEN Model: 7242004 RGM Part Number: 7242004/RGM
* Fruit picker * Grabs fruit stems without harming fruit * 180 deg. adjustable head * Replaceable knife blade cuts even the stubborn stems * handle not included | *$14.97 |
 | Wolfcraft 6102 Tri-Functional Adjustable 27-Inch to 43-Inch Pedestal Roller Support Stand with 11-Inch Plain Roller and 10 Point Roller
Brand: Wolfcraft Model: 6102404 Part Number: 6102404
Single roller stand, support stand, and multi directional all in 1 unit. Adjustable to 43" and supports up to 200 lb. Precision ball bearing roller. Folds flat for easy storage. | *$23.75 |
 | Wolfcraft 6119 Adjustable 27-1/2Inch to 43-1/2-Inch Pedestal Roller Stand with 11-1/2-Inch Roller
Brand: Wolfcraft Model: 6119404 Part Number: 6119404
Adjustable to 43" and supports up to 250 lb. Precision ball bearing roller. Folds flat for easy storage. | *$18.68 |
 | Wolfcraft 6128 Adjustable 27-Inch to 43-1/2-Inch Triple Roller Stand with 16-Inch Rollers
Brand: Wolfcraft Model: 6128404 Part Number: 6128404
19-1/2" Wide Roller, For Support Of Long, Wide Work Pieces, Wide Solid Foot Print For Stability, Height Adjustable Up To 43" With Positive Stop, Supports Up To 330 LB, Precision Ball Bearing On All Rollers For Smooth Movement Of Work Piece, Folds Flat For Easy Storage. | *$95.97 |
 | Veneer Edge Banding Iron
Brand: Woodcraft Supply Part Number: EDGEBANDING IRON
This is the perfect tool for applying heat-activated, pre-glued edge banding to veneer-ply case pieces. Features include a thermostatic heat control, non-stick coating, specially shaped shoe with rounded edges and metal stand. 5-1/2 power cord, 110V. | *$41.99 |
 | 5lb. Pen Blank Grab Bag
Brand: Woodcraft Woodshop Part Number: 126048
Weve assembled two giant assortments of domestic and exotic pen and pencil blanks that allow you to economically sample a wide variety of woods. Each species is labeled for reference. The 5 lb. pen blank grab bag contains a mix of domestic and exotic pen blanks in various sizes. | *$19.99 |
 | Padauk, 3" x 6" x 6"
Brand: Woodcraft Woodshop Part Number: 130978
African padauk (pterocarpus soyauxii) central and tropical west Africa. Medium to hard wood, color can vary, ranging from a pale pinkish orange to a deep brownish red. Most pieces tend to start reddish orange when freshly cut, darkening substantially over time to a reddish/purplish brown. Padauk is easy to work, though it does have a moderate blunting effect on cutters. Tearout may also occur during planing on quartersawn or interlocked grain. Padauk turns, glues, and finishes well. Its a popular hardwood among hobbyist woodworkers because of its unique color. Some common uses for Padauk include: veneer, flooring, turned objects, musical instruments, furniture, tool handles, and other small specialty wood objects. Micro-thin stock is cut to size from quality, kiln-dried stock. 100 clear and sanded on both sides. Dimensions are +- 1/8" grain runs with the longest dimension. | *$17.99 |
 | Maple, Curly, 3/8" x 5" x 24"
Brand: Woodcraft Woodshop Part Number: 131481
Curly maple is not actually a species, but simply a description of a figure in the grain. Curly maple occurs most often in soft maples, but is also seen in hard maples. The heartwood is typically a light tan to reddish brown color and, of course, features a pronounced grain pattern. The sapwood is usually cream colored with a reddish tint. Curly maple is a durable, hard, and dense wood, which carves and turns exceedingly well, and finishes nicely. Curly maple is also referred to as tiger maple, flame or fiddleback maple. This thin stock is cut to size from quality, kiln-dried material. 100 percent clear and sanded on both sides. Dimensions are +/- 1/8". Grain runs with the longest dimension.USA and West Coast Canada. | *$14.99 |
 | Claro Walnut Bowl Blanks, 3" x 6" x 6"
Brand: Woodcraft Woodshop Part Number: 131596
Claro walnut, western USA. "Claro" is a Spanish word meaning clear or bright, and the common name "claro walnut" is usually used to refer to the wood cut from the lower bole (stump) of orchard walnut trees, especially on the west coast of the US. These trees are a mixture of species, created by grafting an English walnut (juglans regia) scion to a rootstock of a native walnut species, either black walnut (juglans nigra) or California walnut (juglans hindsii). The wood near the graft tends to be variegated in color, with beautiful marble-like, dark brown and tan swirls in the figure. Working properties are similar to black walnut. Good strength and bending properties. It takes finishes well. Larger blocks are +- 1/4" of size listed, smaller blocks +- 1/8". Spindle stock (1-1/2" - 2") dimensions are +-1/8". Grain runs with the longest dimension. | *$22.99 |
 | Maple, 3/8" x 3" x 24"
Brand: Woodcraft Woodshop Part Number: 50W50
Maple (Acer saccharum) sapwood color ranges from nearly white, to an off-white cream color, sometimes with a reddish or golden hue. The heartwood tends to be a darker reddish brown. Fairly easy to work with both hand and machine tools. Maple has a tendency to burn when being machined with high-speed cutters such as in a router. Turns, glues, and finishes well, though blotches can occur when staining, and a pre-conditioner, gel stain, or toner may be necessary to get an even color. Some common uses for hard maple include flooring (from basketball courts and dance floors to bowling alleys and residential), veneer, pulpwood, musical instruments, cutting boards, butcher blocks, workbenches, baseball bats, and other turned objects and specialty wood items. This thin stock is cut to size from quality, kiln-dried stock. 100 percent clear and sanded on both sides. Dimensions are +/- 1/8". Grain runs with the longest dimension. USA. | *$6.99 |
 | Birch Plywood, 3/8" x 12" x 30"
Brand: Woodcraft Woodshop Part Number: 50Y03
This 100 Finnish birch multi-ply plywood is lightweight, yet has superior strength and durability characteristics which make it useful for a variety of woodworking applications, including drawer sides and bottoms, scrollsaw projects, or in jigs and fixtures. Multiple-ply edges can be sanded or routed and the plywood has excellent screw-holding power. The "front" face is classified as paint grade, slight variation in color is acceptable, but no patches are allowed. The "rear" face and inner plies may contain patches. Both faces are sanded smooth. Exterior glue is used so this plywood can even be used for outdoor projects (with an appropriate outdoor finish). 3/8" has 7 plies. Grain runs with largest dimension Overall size may vary +/- 1/8". No two pieces are alike and because of the irregular shape and size, dimensions listed are approximations. | *$20.99 |
 | Olivewood, 3/4" x 3/4" x 5" (10 pc.)
Brand: Woodcraft Woodshop Part Number: 826211
African olivewood (olea capensis) The heartwood is often pale to medium brown with irregular streaks that vary from brown to dark-brown and dark grey. The sapwood is generally pale yellow. Wood has excellent strength properties. Material can be difficult to work due to interlocked grain and oily surface of the wood. Olivewood needs care when drying to avoid checking or honeycombing, especially with thicker material. Glues well, recommended pre-boring needed when nailing. Moderate blunting effect to cutting tools. Polishes up well and gives a smooth even finish. Olivewood is used for sculpture and carving work, decorative turnings, inlay, and high end custom furniture.Larger blocks are +- 1/4" of size listed, smaller blocks +- 1/8". Spindle stock (1 1/2" - 2") dimensions are +-1/8". Grain runs with the longest dimension. | *$18.99 |
 | Woodmark Standard Woodworker Workbench with 7-inch Quick-release Vise
Brand: Woodmark Model: WB-5420DL Part Number: WB-5420DL
The Woodmark workbench is built entirely of durable, solid hardwood, hot-glued under high pressure for maximum durability. It's quality constructed with heavy-duty hardware throughout.
The Standard Workbench has more than 7 square feet of workspace (53-1/2" x 19-2/3") and comes with a 7-inch quick-release front vise and the built-in tail vise. | *$429.99 |
 | Woodstock Maple Pen Blanks (5 Pack) - D3055
Brand: Woodstock Model: D3055 Part Number: D3055 | *$4.95 |
 | 2" Polytape insulator for Electric Fence - White
Brand: Woodstream
Snap on white "T" post insulator for 2" tape. It has a tight fit so insulator doesn't pop off. The 25 pack weighs 1.5lbs. | *$6.50 |
| 2" Polytape insulator for Electric Fence - Black
Brand: Woodstream
Snap on "T" post insulator for 2" tape. It has a tight fit so insulator doesn't pop off. Even though the picture is of a white insulator, you are buying a pack of 25 black insulators. The 25 pack weighs 1.5lbs. | *$6.50 |
 | Fi-Shock Inc 3Hole Twisting Tool 300-309
Brand: Woodstream Model: 300-309 Part Number: 300-309
Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire. | *$1.93 |
 | Fi-Shock Inc 1/16A Time Delay Fuse 301-404
Brand: Woodstream Model: 301-404 Part Number: 301-404
1/16 amp fuse used in model Nos.SS-250, SS-550, SS-650 and SS-750. | *$4.57 |
 | Woodstream #301-569 Replacement Solar Battery
Brand: Woodstream Model: 301-569 Part Number: 301-569
Replacement Solar Battery For Solar Shock Low Impedance Energizer, For Model # SS-440 SS-740, 4V. | *$15.41 |
 | Aluminum Wire 250' 17 Gauge
Brand: Woodstream Model: FW-00018 Part Number: FW-00018
250 ft, 17 gauge spool. Aluminum conducts electricity 4 times better than galvanized steel. | *$7.49 |
|
