 | Grip 35402 13-Pc Titanium Coated Wood Spade Bit Set
Brand: Grip Model: 35402 Part Number: 35402
The Grip 35402 is a 13-Pc Titanium Coated Wood Spade Bit Set. These 1/4 shank bits are made of drop forged, heat treated steel construction. Precision ground spur and cutting create smoother and faster cuts. The spur point ensures accurate positioning and quick penetration. Spade bits make crisp, clean holes through wood projects. | *$10.99 |
 | Grip 69058 7-Piece Hollow Shaft Nut Driver Set (Metric)
Brand: Grip Model: 69058 Part Number: 69058
Professional quality Double injected cushion grip Includes Sizes 5mm, 6mm, 7mm, 8mm, 10mm, 11mm, and 12mm | *$12.99 |
 | Grip 69060 7-Piece Hollow Shaft Nut Driver Set (SAE)
Brand: Grip Model: 69060 Part Number: 69060
Professional quality Double injected cushion grip Includes Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, and 1/2 | *$12.99 |
 | Grip 85207 Welding Goggles
Brand: Grip Model: 85207 Part Number: 85207
The Grip 85207 is a Welding Goggles. The welding goggles provide maximum eye protection and features soft vinyl frame for a comfortable fit. It provides enough space to wear over top of glass. | *$3.99 |
 | Grip-On Tools Tapered Reamer Set - 2-Pc., 1/8in to 1/2in., 5/32in. to 7/8in., Model# 22190
Brand: Grip-On Part Number: 22190
Have this handy tapered reamer set near your automotive work bench. Ideal for enlarging and cleaning dashboard holes for switches and warning lights to correcting misaligned holes in chassis brackets. Can be used on steel, aluminum, acrylics and wood. | *$12.99 |
 | Grip-On-Tools 5-Pc. Pickle Fork Kit, Model# 21318
Brand: Grip-On Model: 21318 Part Number: 21318
5-pc. ball joint/tie rod kit. Single, Pair, or Set: Set, Jaw Capacity (in.): Ball joint separator 15/16, Common Usage: Ball joint/tie rod kit, Opening (in.): Tie rod spreader 1 1/16, and pitman arm wedge 1 1/18, Works With: Air impact hammer, Handles (qty.): 2, Handle Length (in.): 7 and 8, Handle Type: Piloted for shock absorbing, Material Type: Chrome vanadium steel, Storage Case Included: Yes, Pieces (qty.): 5 | *$10.99 |
 | Grip-Rite GRTFR83 RH Short-Body 21 Degree Framing Nailer, 3-1/4-inch
Brand: Grip-Rite Model: GRTFR83 Part Number: GRTFR83
Grip-Rite GRTFR83 New from Grip-Rite, the name you trust for your collated and hand drive fasteners, comes the next generation of framing nailers. The new GRTFR83 is a durable and reliable framer, that packs a lot of power into a lightweight, well balanced tool. It's short body allows it to be fired in confined spaces. At 6.9 pounds, almost a pound lighter than the competion, combined with it's centered balanced design and comfort grip elimates fatique. But don't let the size fool you. The power comes from the revolutionary head valve system which allows the tool to recycle a portion of the air to powerfully and effiently drive nails flush without premature "stair-stepping" of the nail. The new head valve system also allows the user more shots per compressor cycle. Features: -Rotating aluminum rafter hook -Lightweight Magnesium housing -Tool-free depth adjustment -Selectable trigger (sequential and bump-fire) -Fast, easy dual loading -Dry fire lockout extends bumper life -Nail capacity- 75 -Includes: Safety glasses, hex wrenches, removable, no-mar pad, tool oil, and male swivel coupler. -12-month limited warranty -Applications: framing, decking, fencing, sheathing, siding, subfloors, and trusses Specifications: -Fastener type: 21 degree round head framing -Weight: 6.9 pounds -Dimensions: 12.4" H x 21.7" L x 4.5" W | *$199.99 |
 | Grip-Rite GRTMP16 Mini Palm Nailer
Brand: Grip-Rite Model: GRTMP16 Part Number: GRTMP16
The Grip Rite Mini Palm Nailer is 1 3 the size and weight of a regular palm nailer, yet still stands up to the professional use. The tool is designed to handle the vast majority of applications without the added bulk and weight of other palm sized air nai | *$29.99 |
 | Grip-Rite GRTPN600 Palm Nailer
Brand: Grip-Rite Model: GRTPN600 | *$79.54 |
 | Grizzly G0654 6" x 46" Jointer
Brand: Grizzly
We cant believe it either! A full featured cast iron 6" Jointer with tons of extras for $335? You bet! Take a look at these great features and youll be scratching your head too: A "kick stand" mobile base, depth of cut scale with 1/8" index setting, 4" dust hood, a quick adjust infeed table hand lever and a precision handwheel for outfeed table adjustments. It even includes a pair of push blocks and a built-in push block shelf.Specifications:. Motor: 1 HP, 110V, single-phase. Maximum stock width: 6". Maximum depth of cut: 1/8". Maximum rabbeting capacity: 1/2". Cutterhead diameter: 2-1/2". Number of knives: 3 HSS. Knife size: 61/8" x 5/8" x 1/8". Table size: 7-1/2" x 46". Table height from floor: 33-3/8". Fence size: 4-1/2"H x 29-3/8"L. Fence adjustment positive stops: ±45° 90°. Overall dimensions: 46" L x 21-1/4" W x 37-3/4" H. Approximate shipping weight: 240 lbs. | *$375.00 |
 | Grizzly H9815 Power Twist® V-Belt, 1/2" x 4' (T21992)
Brand: Grizzly Part Number: 0418130
Perfect for lathes, table saws, bandsaws and other woodworking tools. Smooth running with less vibration than solid belts. Power Twist® V-Belts can be customized in minutes to any size - just add or remove sections to fit your needs. Carry a Power Twist® V-Belt in your vehicle for a fix anywhere solution to broken fan belts. | *$26.50 |
 | Grizzly H8028 Pen Press
Brand: Grizzly Part Number: 0510-2105
Press pen segments together with controlled lever action. A sliding rod adjusts for progressively longer segments. Includes long lever handle and two alignment pins. Indispensable for any pen maker! | *$24.95 |
 | Grizzly G0516 Combo Lathe w/ Milling Attachment
Brand: Grizzly Part Number: G0516
Precision, versatility and high quality in a small package are what you get with our new G0516 Lathe Mill Combo. The 6 speed lathe includes big machine features like a 4-way turret tool post, cuts both metric and inch threads, see-through eye shield, 3/4 HP motor and a 9 3/4" swing. The milling head features its own 4/5 HP variable speed motor, tilting column, MT#3 spindle taper and 8" of vertical travel. It bolts onto the back of the bed and is sturdy and versatile. This is an exceptional value and will make a great addition to any shop. | *$1,195.00 |
 | Grizzly G0538 1/3 HP Oscillating Spindle Sander
Brand: Grizzly Part Number: G0538
Nothing beats the finish of an Oscillating Spindle Sander for smoothing curved edges and when space is limited, you'll really appreciate this bench top version. With its large table surface and six different sanding drum diameters stowed neatly under the table, the right sanding drum is a quick change away for perfect results. Includes spindle changing wrenches, table inserts and 2 1/2" dust port. Motor: 1/3hp, 110V 1725RPM Toggle on/off safety switch with locking tab Extra large 20" x 14" Table Spindle oscillates at 72 strokes per minute, 5/8" Oscillating Range Comes with six 4 1/2" tall sanding drums, three 80 grit sleeves (1/2", 1" and 2") three 150 grit sleeves (3/4", 1 1/2",and 3") and 6 table inserts. Approximate shipping weight 37 lbs. | *$129.95 |
 | Grizzly G0555 The Ultimate 14" Bandsaw
Brand: Grizzly Part Number: G0555
We have redefined what a 14" Bandsaw should be like and have incorporated features into this saw that normally are either optional or unavailable on other Bandsaws on the market. CHECK IT OUT! There is absolutely no other company in the world that has a larger selection of Bandsaws than Grizzly. We know Bandsaws inside-out and our numerous years of selling Bandsaws has culminated in this incredible 14" saw shown above. You will not be disappointed! Made in ISO 9001 Factory Features: * Deluxe heavy-duty stand * 1 HP motor * Upper and lower ball bearing blade guides are standard * All ball bearing construction * 4" dust port * Includes one 3/8" blade, fence and miter gauge * 2 speeds ? Fence scale with magnifying window * Optional Riser block kit (H3051) available. Specifications: * Cutting capacity/throat: 13-1/2" * Maximum cutting height: 6" * Overall size: 66-1/2"H x 26-3/8"W x 30-1/4"D * Table height above floor: 43-5/16" * Table tilt: 45° right, 10° left * Frame construction: Cast iron * Table construction: Precision ground cast iron * Fence construction: Deluxe extruded aluminum * Wheels: Fully balanced cast aluminum with rubber tires * Motor: 1 HP, TEFC, 110V / 220V single phase, 1725 RPM * Amps: 10@110V / 5@220V * Blade speeds: 1500 3200 FPM * Blade size: 92 1/2 - 93-1/2" (1/8" to 3/4" wide) * Table size: 14" x 14" * Approximate shipping weight. 210 lbs. | *$425.00 |
 | Grizzly G0560 Meat Saw w/ Sliding Table
Brand: Grizzly Part Number: G0560
Designed especially for home butchers, this upright design takes up less room and features a sliding table so meat processing is a breeze. All stainless steel table and fence components conveniently disassemble for easy clean-up. 77-1/2" blade length. All ball bearing wheels. Approximate shipping weight of 123 lbs. | *$395.00 |
 | Grizzly G0612 6" x 24" Bench Top Jointer
Brand: Grizzly Part Number: G0612
Don't let the size of this bench top jointer fool you! With its cast iron tables and center mounted cast iron fence, this 6" Jointer is tough enough to handle any job. It also features a 2 HP motor, 2-1/2" dust port, large dust collection bag, 45° bevel adjustment and easy to adjust knives. Great for shops with limited space or take it to the job site for portable jointing power! | *$189.95 |
 | Grizzly G0645 1/2 HP Bench-Top Mortising Machine
Brand: Grizzly Part Number: G0645
Drill square sided mortises with this Benchtop Mortising Machine. Rigid cast iron construction and a rack and pinion head control mechanism slides on a dovetailed column with adjustable ways to ensure precision mortises every time. A pneumatic return strut eases the step and repeat cycle of multiple drilling. An extension block is also included to increase the maximum stock thickness to 6". The 1/2 HP motor powers through any wood and the easy access drill chuck makes changing mortising drills a snap. Includes 4 mortising chisels! Specifications: Motor: 1/2 HP, 110V, single-phase Amps: 6 Speed: 1750 RPM Spindle taper: JT#2 Spindle travel: 3-1/4" Chuck size: 3/8" Collar size: 5/8" Number of speeds: 1 Maximum stock width: 8-1/2" Maximum stock thickness without extension block: 4-1/4" Maximum stock thickness with extension block: 6" Maximum mortising depth: 3" Maximum chisel travel: 4-5/8" Maximum distance column to chisel: 5" Chisel size range: 1/4" - 1/2" Table size: 12-1/2" x 12-1/4" Overall height: 32" Approx. shipping wt.: 76 lbs. Features: Tool storage rack on back of column Includes four chisels Dovetailed column and head Includes 1-3/4" riser block for increased | *$225.00 |
 | Grizzly G0691 10" 3HP 220V Cabinet Table Saw with Long Rails Riving Knife
Brand: Grizzly Part Number: G0691
We couldnt offer the gold standard in left tilting Cabinet Table Saws without offering an extended rip capacity version too. Just like the G0690 Table Saw in every other way, this saw also features a 50" rip capacity more than enough to rip to the center of a standard sheet of plywood. The extension table features adjustable legs, square steel tubing frame dimensionally stable top. True riving knife moves up, down tilts with blade. Short riving knife is included. Tall splitter/riving knife that the blade guard mounts to is included as well. If you do any amount of cabinet or plywood work, this saw is the answer to your dreams! SPECIFICATIONS: Motor: 3 HP, 220V, single-phase Leeson Blade tilt: Left Table height from floor: 34" Table size with extension: 27" x 74-3/4" Arbor speed: 4,300 RPM Arbor size: 5/8" Maximum dado width: 13/16" Maximum depth of cut @ 90°: 3-1/8" Maximum depth of cut @ 45°: 2-3/16" Maximum rip capacity: 50" Distance from front of table to blade at maximum cut: 12-1/4" Distance from front of table to center of blade: 17-1/4" Overall dimensions: 82"L x 41"W x 40"H Approximate shipping weight: 572 lbs. | *$1,250.00 |
 | Grizzly G1071 Oscillating Spindle Sander
Brand: Grizzly Part Number: G1071
This sander's big 25" x 25" table makes cabinet doors and other large projects a breeze to edge sand - and the wide variety of interchangeable spindles turn custom work into "child's" play. Our spindle sander will satisfy the needs of both the professional and serious hobbyist. We back this up with our warranty, parts and service. Features: Cast iron 25" x 25" table tilts to 45°, 15° right * Ten spindle sizes: 1/4" x 5", 3/8" x 6", 1/2" x 6", 5/8" x 6", 3/4" x 9", 1" x 9", 1-1/2" x 9", 2" x 9", 3" x 9", 4" x 9", tapered and threaded * Floor-to-table height of 35-1/2" * Heavy-duty 1 H.P. 110/220V TEFC motor * 1725 R.P.M. spindle speed * Includes formed and welded steel stand * Spindle oscillates at 72 strokes-per-minute * Stroke length: 1-1/2" * Built-in 4" dust collection port * Lubricated for life ball bearings * Features ground steel table inserts and 100 grit sleeve for each spindle * Powder coated paint * Shipping weight approx.: 296 lbs. | *$650.00 |
 | Grizzly G1081 Drill Sharpener
Brand: Grizzly Part Number: G1081
Install next to your bench grinder and sharpen drill bits from 1/8" to 3/4" very quickly. Adjustable for drill-point angles. | *$16.95 |
 | Grizzly G4173 Baby Power Feeder
Brand: Grizzly Part Number: G4173
If you do any kind of production ripping or milling, you know what a big chore it can be feeding by hand, especially with longer and wider stock. For those of you who want to increase production, upgrade or add on an extra stock feeder, we have a power feeder that will match virtually any application and budget. Features: Forward and reverse X Y Z adjustment Multiple feed speeds One year warranty Specifications: Motor: 1/8 H.P., 110V, 1.2 amp Number of speeds: variable Range of speeds (approx.): 6-1/2 - 39 FPM Wheels: 3, synthetic rubber, 1-1/8" W x 3" Dia. Rotation: forward and reverse Maximum height of rollers: 6" Vertical movement: 13" Horizontal movement: 11" Shipping weight approx. 27 lbs. | *$299.95 |
 | Grizzly G5970 Electric Palm Sander
Brand: Grizzly Part Number: G5970
This quarter-sheet palm sander features a built-in dust collection bag and sealed On/Off switch for long dependable life. Swirl-free 10,000 orbits per minute make this double insulated sander an indispensable part of any shop. | *$18.95 |
 | Grizzly G8027 1 HP Dust Collector
Brand: Grizzly Part Number: G8027
A great little workhorse at an incredible price! This is a great machine for sanders, router tables, shapers, and other work. It's also very portable, so you can take it to the job site where it can handle the big jobs a regular shop vacuum can't handle. Motor Size: 1 H.P., single phase Motor Amp Draw (at 110V): 14 Number of 4" Intake Holes: 1 Portable Base Size: 15" x 25-1/2" Height (With bags inflated): 63" Bag size (diameter x depth): 14-1/2" x 23" (2) Powder coated paint Bag Capacity: 2 Cubic Feet Impeller: Balanced Steel, Radial Fin Air Suction Capacity: 500 CFM Static Pressure: 2.76 Approx. Shipping Weight: 71 lbs. | *$149.95 |
 | Grizzly G8688 7" x 12" Mini Metal Lathe
Brand: Grizzly Part Number: G8688
Powered by a 3/4 H.P. motor, this lathe also features: variable speeds (0-2500 RPM), inch and metric reading dials, turret tool post, chip tray splash guard. Features: ? Variable Speed ? 16 TPI Reversible Leadscrew ? Forward and reverse in all speeds ? Chip Tray Backsplash Guard ? Threading Dial Indicator ? Standard Metric Graduation Specifications: ? Swing over bed: 7" ? Distance between centers: 12" ? Spindle bore: 20mm ? Spindle nose taper: MT #3 ? Tailstock taper: MT #2 ? Tailstock travel: 2-1/2" ? Cross-slide travel: 2-3/4" ? Maximum tool bit size: 5/16" ? Speed range: Low Range: 0-1100 RPM, High Range: 0-2500 RPM ? Range of threads: 12-52 TPI ? Motor: 3/4 HP, 110V ? Number of thread pitches: 18 inch 10 metric ? Net weight: 74 lbs. ? Shipping weight approximate: 89 lbs. Standard Equipment: ? 3" Three-Jaw Chuck with External Jaws ? 6-1/4" Face Plate ? Steady Rest ? Four-Position Turret Post ? Complete Set of Change Gears ? MT #2 Dead Center ? Wrenches | *$495.00 |
 | Grizzly G8692 Portable Bandsaw w/ Stand
Brand: Grizzly Part Number: G8692
Converts from a bench-top metal cutoff saw to a hand-held portable metal cutting bandsaw in just seconds. * Capacity: 4-3/4" round * Two speeds: 190 FPM 262 FPM * Blade size: 44-7/8" x 1/2" * Table size: 7-1/2" x 5-1/2" * Motor: 1 HP, 110V, single-phase, AC * Double insulated * Voltage: 110V, AC * Shipping Weight: 39 lbs. | *$154.95 |
 | Grizzly G9742 5" x 6" Metal-Cutting Bandsaw w/ Swivel Head
Brand: Grizzly Part Number: G9742
This is one of the best saws on the market for the small or large shop. It features a 5" round and 5" x 6" rectangular capacity. But what really sets this apart from other saws of this size is the head swivel giving a maximum angle of cut of 60deg! Remember how much trouble it is to change a vise backing jaw only to get a 45deg cut? Not with this guy. The easy-to-adjust head has stops in all the right places. And because the vise backing jaw is rigid on this saw it is taller, giving it the ability to support the workpiece better. And of course, the machine comes with all the features you'd expect from Grizzly hydraulic down feed control, easy access wheels for quick blade changes and the right blade speeds to do the job. | *$495.00 |
 | Grizzly H6330 2-1/4 gal. Paint Tank
Brand: Grizzly Part Number: H6330
With a 2-1/4 Gallon capacity, this Paint Tank features a smooth walled galvanized steel tank for easy clean up, double output regulator and pressure relief/safety valve. Lid gasket and clamps stay attached during lid removal. Works with any pressure feed HVLP or conventional spray gun. Maximum pressure is 50 PSI. Hose not included. | *$70.75 |
 | Grizzly H7665 21° Round Head Framing Nailer
Brand: Grizzly Part Number: H7665
This Framing Nail Gun Features: *Shoots 2" - 3 1/2" round head nails *Soft nose guard is removable *Safety on nose protects against "dry" firing when stick is used up *21° magazine *Easy-view magazine lets you see when the stick is almost gone *Rubberized hand grip *Safety trigger *Supplied with case, safety goggles, oil and wrenches | *$89.95 |
 | Grizzly H7760 Combo Belt Sander/Grinder
Brand: Grizzly Part Number: H7760
Grind the perfect edge on all your tooling and cutting edges with this Combination Grinder/Belt Sander. The 6" x 3/4" x 1/2" arbor grinding wheel is perfect for hollow grinding and the 2" x 27" belt is just the thing for all flat grinding. Features include a 1/2 HP, 110 volt, 3450 RPM motor, built-in coolant tray, built-in wheel dressing tool, flexible work light, magnifying eye shield and 1-1/2" dust port. Approximate shipping weight: 26 lbs. | *$79.95 |
 | Grizzly H8171 Hydraulic / Electric Log Splitter
Brand: Grizzly Part Number: H8171
Motor: 1-3/4 HP, 110V, 15 amps. 5 tons of hydraulic pressure. Handles logs from 15" - 20" long and up to 10" diameter. Electric power for use in basement or garage. Built-in wheels and handles for portability. Easy operation - even with gloves on. Approx. shipping wt.: 110 lbs. | *$295.00 |
 | Grizzly H8192 1" X 8" Belt/Disc Sander
Brand: Grizzly Part Number: H8192
A perfect match to your bandsaw or scroll saw, this Combination Belt/Disc Sander will shape and smooth right to the line. A 1/3 HP, TEFC capacitor start induction motor powers the 1" x 42" belt and 8" disc through any sanding chore and the cast iron tilting tables give you the flexibility you demand. Includes single knob tracking and two 2" dust ports. Approximate shipping weight is 63 lbs. | *$150.95 |
 | Grizzly H8104 Vertical Stirling Engine Machined Kit
Brand: Grizzly Part Number: HAE03MK
This vertically configured Stirling Engine operates by converting heat energy into mechanical motion. The Stirling engine was originally developed as a safer alternative to high pressure steam engine boilers. This working model is powered by a clean burning alcohol burner. This kit includes all machined parts necessary for simple assembly, so you can have this model running in no time at all. The finished kit measures 4-3/4"L x 4-3/4"W x 111/2"H. The base measures 7-1/8"L x 7-1/8"W. | *$164.00 |
 | Grizzly G0547 Combo Sander 4" x 36" Belt 6" Disc
Brand: Grizzly Part Number: MM46
This stationary bench top Combo Sander offers all the power and control you need for sanding smaller workpieces for less than the cost of a portable belt sander. Compact design is great for the smaller workshop. Other features: single knob tracking; 2-1/2" dust ports for belt and disc; belt platen rotation of 0-90 degrees; approximate shipping weight of 38 lbs. | *$113.95 |
 | Grizzly H0800 Heat Gun - 1200 Watt
Brand: Grizzly Part Number: NEG-1A
These two superb heat guns are very versatile. Both guns feature variable temperature control from 120-590 degrees C. The 1200 Watt model can handle most applications easily while the 1800 Watt model is more for heavy-duty, industrial use. Both are UL approved. | *$15.95 |
 | Grizzly G0561 7" x 12" Metal Cutting Bandsaw
Brand: Grizzly Part Number: RF-712N
This large capacity Metal-Cutting Bandsaw has a small footprint as well as being completely mobile! Designed to cut 7" round and 7" X 12" rectangular stock, this machine also features hydraulic downfeed control, coolant system, blade brush and more! Maximum circular capacity of 7" @ 90 degrees, 5" @ 45 degrees. Maximum rectangular capacity of 7" x 12" @ 90 degrees, 4-3/4" x 4-1/2" @ 45 degrees. Footprint of 13" x 38", overall dimensions of 48" long x 16" wide x 37-5/8" high. Coolant capacity of 1-1/2 gallons. Quick positioning vise included. Approximate shipping weight of 330 lbs. | *$825.00 |
 | Grizzly H5527 18 Gauge Brad Nailer Kit
Brand: Grizzly Part Number: RP9069I/F50
This 18 gauge Nailer accepts up to 100 5/8" - 2" brads, operates on 60-100 PSI, features a 360 degree adjustable exhaust and only weights 3.5 lbs. and includes a case. | *$23.95 |
 | Grizzly G0476 Benchtop Sandblast Cabinet
Brand: Grizzly Part Number: SBC-90
Benchtop Sand Blasting Cabinet | *$119.95 |
 | Grizzly G0555X 14" Extreme Series Bandsaw
Brand: Grizzly Part Number: SBW-3501K
We have turned one of our most popular bandsaws into an extreme machine. We made the stand heavier, the table bigger, and the cast iron wheels stronger to take on your toughest jobs. We've even added a Re-saw Fence and a built-in light. And our ingenious 2-piece table extends all the way to the left yet, allows the table to tilt to 45 degrees without removing anything. Just look at all these features and we think you'll agree, this is one awesome bandsaw. | *$625.00 |
 | Grizzly G0443 1-1/2 HP Cyclone Dust Collector
Brand: Grizzly Part Number: SF-701
Cyclonic action separates the heavy dust particles from the fine particles drops them into the 35-gallon steel drum. The fine dust travels past the 12" diameter impeller is then trapped by a cartridge filter made of spun-bond polyester that filters 99.9% of particles from 0.2 to 2 microns in size. The cartridge filter is pleated to provide 86 square feet of surface area for efficient air movement a clear plastic bag collects the fine cake that shakes off the filter for consistent dust collector performance. Casters mounted to the drum also make disposal of the larger chips dust as easy as it gets. Other features include: a vertical motor support for reduced vibration, thick walled 11 gauge steel blower housing, 16 gauge steel cyclone body, 360 degree blower rotation for easy connection to a duct system a TEFC Class "F" motor. The optional steel legs support frame (H7508) also make setup quick easy SPECIFICATIONS: Intake hole size: 6" Bag material: Plastic Impeller size: 12 1/2" steel, riveted Suction capacity: 1025 CFM @ 2.5" SP Maximum static pressure (inches of water): 10.3" Collection Drum: 35 gallons Overall dimensions: 55-1/2" wide x 36-1/4" deep x 87 1/2"" high Amps: 18.85/9.4 Cycle/RPM: 60 Hertz/3450 RPM Switch: On/Off push button magnetic switch w/remote control devise Approximate shipping weight: 313 lbs. | *$775.00 |
 | Grizzly T10010 10" Wet Grinder Kit
Brand: Grizzly Part Number: T10010
Sharpen just about any cutting tool to a razor sharp edge in no time at all. Made in Germany, this 90 RPM wet grinder with leather stropping wheel is so versatile and simple to use, you'll wonder why you ever put up with dull edges before. The durable 2" wide grinding wheel runs in a water bath to keep tools cool while sharpening and the leather stropping wheel hones to a final razor edge. Start sharpening right out of the box, or add the optional accessories for even greater sharpening convenience. Ideal for wood turners, wood workers knife makers. Includes polishing/honing paste. Specifications: ? 220 grit grinding wheel is specially made for wet grinding ? 110 RPM wheel speed ? Grinding wheel measures 10" diameter x 2" wide ? Water bath keeps tools cool while sharpening ? Leather stropping wheel measures 200mm diameter x 30mm wide ? Includes polishing/honing paste | *$169.95 |
 | SOLDERING TORCH HOKE JEWEL OXYGEN/BOTTLED
Brand: Grobet Part Number: GRO14123
For quality, insist on the HOKE-JEWEL torch, most widely used by professional jewelers for daily work. Ideal for precision metal melting, soldering, brazing and welding. Fingertip control of valves and selection of tips allow user to select type of flame required, from large brush to pinpoint. Valves work easily and surely, with precise mixing of gas and never any leakage. All parts are machined from solid brassstock and seamless brass tubing and are completely nickel-plated. Overall length is 9" (229 mm). Inlets use standard 1/4" (6 mm) hose. For oxygen, and butane or propane. No pilot and comes with 4 tips, pinpoint, pencil, small and large brush. | *$65.51 |
 | MAGNESIUM SOLDERING BLOCK
Brand: Grobet Part Number: GRO54186
Soft, fire-proof material, into which work or pins can be easily pressed. Measures 6" x 3" x 1-1/2". Withstands temperatures up to 2000 F (1093 C). | *$4.95 |
 | CERAMIC SOLDERING BLOCK 6X6 WITH FEET
Brand: Grobet Part Number: GRO54218
Non-asbestos. Withstands temperatures up to 2000 F (1093 C). Rubber feet keep board raised above bench. | *$16.17 |
 | Grundfos MQ3-45 96860195 1 HP Pressure Booster Pump - 115 Volt
Brand: Grundfos
The MQ is a complete, all-in-one unit, incorporating pump, motor, diaphragm tank, pressure and flow sensor, controller and check valve. Built in safeties ensure long life of the pump. These safeties include: dry running; excessive temperature; any overload conditions. The MQ is a self priming pump and needs no priming other than that at installation. The MQ is a plug-n-play system. | *$494.69 |
 | Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump (595916)
Brand: Grundfos Part Number: UP15-10SU7P/TLC
Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump (595916)The Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump is a Comfort Series Instant Hot Water System. Includes timer and line cord. Grundfos Pumps is proud to bring the comfort and savings of hot water recirculation to the existing homes market with the Comfort Series Instant Hot Water System. The Comfort System includes a Grundfos UP15-10SU7/TLC circulator and the revolutionary Comfort Valve. The stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater. The Comfort Valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.SPECIFICATIONS - Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump:; Flow range: 0 - 6.5 U.S. GPM; Head range: 0 - 6 FEET; Motors: Single Phase, 115 Volts; Maximum fluid temperature: 150;F (66;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI; Connection: 3/4-inch M X 3/4-inch FNPT; TLC = Timer, Line CordCONSTRUCTION - Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Volt | *$248.99 |
 | Grundfos UP15-42B5/TLC 1/25 HP Recirculator Pump with Timer and Line Cord (59896234)
Brand: Grundfos Part Number: UP15-42B5/TLC
Grundfos UP15-42B5/TLC 1/25 HP Recirculator Pump with Timer and Line Cord (59896234)The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems.SPECIFICATIONS - Grundfos UP15-42B5/TLC 1/25 HP Recirculator Pump with Timer and Line Cord (59896234):; Flow range: 0 - 17 U.S. GPM; Head range: 0 - 15.5 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 230;F (110;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 1/2"; TLC = Timer, Line Cord, 6' footFEATURES and BENEFITS - Grundfos UP15-42B5/TLC 1/25 HP Recirculator Pump with Timer and Line Cord (59896234):; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance-free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required. | *$370.51 |
 | Gryphon Twister Stained Glass Grinder
Brand: Gryphon Corporation
The Gryphon Twister offers a revolutionary advance in comfort. By simply rotating the base, the grinding surface converts from horizontal to inclined. For the first time, you can sit while grinding. Even if you stand, the inclined work surface reduces fatigue because you no longer need to stoop over your work to see what you are doing.
Gryphon Slip-on Bits are the industry's easiest to change. The bits slip onto the shaft and held securely in place with a slight twist. To remove a bit, you simply lift it straight up. 1" and 3/4" bits are easily interchanged in seconds without tools or levers.
An automatic pump supplies a constant flow of water directly to the bit regardless of saw orientation. Because of the way the water is directed onto to the bit, there is virtually no splash. No sponge is required in this arrangement, eliminating a common source of irritation.
Also includes
Two Gryphon Slip-on Bits
Longer bit life due to improved cooling | *$208.95 |
 | H S Auto Shot (HS 4550) StarterKit Plus
Brand: H and S Auto Shot Part Number: 4550
ulThe Ultimate in Starter Kits! KIT CONTENTS: UPGRADED 4550 Starter stud welder with exclusive Stud Ease Technology UPGRADED 1016 T handle slide hammer Package of 500 Flexpert welding studs The most powerful lightweight stud gun available Super sensitive trigger in handle for one-handed operation Built-in overload protection Grounded 3-wire cable 2 YEAR LIMITED WARRANTY LIFETIME TRANSFORMER WARRANTY/ul | *$179.99 |
 | Hakko Soldering Station, 936, ESD, With 907 ESD Iron
Brand: Hakko
Compact and stackable for more workbench room Thin grip irons for comfort and control Lock screw (936 Model) or keycard (937 Model) prevents temperature setting changes ESD safe Economical choice for general use soldering. Both regular and ESD versions include 907 pencil-style handpiece and workstand. Specifications 60W Temperature range: 392 - 896°F (200 - 480°C) Temperature Stability: ±1.8°F (1.0°C) (Japan) Analog version of 937 station. Temperature setting is controlled by lock screw. (936-12) | *$93.77 |
