 | Ingersoll Rand 212 3/8-Inch Super Duty Air Impact Wrench
Brand: Ingersoll-Rand Model: IRT212 Part Number: IR 2115TIK
This Ingersoll Rand air impact wrench delivers smooth power unaffected by pressure changes. U.S.A. Drive (in.): 3/8, Average Air Consumption (CFM): 2.5, CFM at Load: 11, Speed - No Load (RPM): 10,000, Blows Per Minute (BPM): 1,500, Max. Torque (ft.-lbs.): 180, Working Torque (ft.-lb.): 20 - 150, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Standard Bolt Capacity (in.): 7/16, Variable Speed: Yes, Tool Length (in.): 6 | *$128.00 |
 | Ingersoll-Rand 2130-2 Heavy Duty 1/2-Inch Impact Pnuematic Wrench with 2-Inch Extended Anvil
Brand: Ingersoll-Rand Model: IRT2130-2 Part Number: 2130-2
2130-2 The 2130 has all the performance and features you have come to expect from the IR family of impact wrenches. This Impact features a powerful twin hammer mechanism and a new composite housing, yielding superior ergonomics in lightweight package. Features: -1/2'' Air Impact Wrench with 2'' Extended Anvil. -Average Air Consumption: 4.4 cfm (124.6 l/min). -Air Consumption @ Load: 22 cfm (623 l/min). -Sound (pressure/power): 96.6/109.6 dBA. -Free Speed: 9500 RPM. -Weight: 4.6 lbs. -Hose size: 3/8'' (10 mm). -Length: 9.25''. -Working Torque Range: 50-500 ft-lb (68-680 Nm). -Max Torque (reverse): 550 ft-lb (745 Nm). -Air Inlet NPTF: 1/4''. -Full-stroke tease throttle. -Multi-position power management. | *$163.99 |
 | Ingersoll Rand 2161XP 3/4-Inch Ultra Duty Air Impact Wrench
Brand: Ingersoll-Rand Model: IRT2161XP Part Number: 2161XP
This Ingersoll Rand air impact wrench combines a 6-vane, high-output air motor, through-bolt construction, ergonomic handle and housing design to create a tool with increased power and durability. U.S.A. Drive (in.): 3/4, Average Air Consumption (CFM): 10, CFM at Load: 46, Speed - No Load (RPM): 6,000, Blows Per Minute (BPM): 1,025, Max. Torque (ft.-lbs.): 1,250, Working Torque (ft.-lb.): 300 - 1,000, Inlet Size (in.): 3/8, Min. Hose Size (in.): 1/2, Variable Speed: Yes | *$597.95 |
 | Ingersoll-Rand 2161XP-6 Ultra Duty 3/4-Inch Pnuematic Impact Wrench with 6-Inch Extended Anvil
Brand: Ingersoll-Rand Model: IRT2161XP-6 Part Number: 2161-6XP
3/4 In Drive Ultra Duty Impact Wrench w/ 6" AnvilThe new IR2161XP-6 combines a six-vane high output air motor, through-bolt construction, ergonomic handle and housing design to create an impact tool that offers increased power and durability like no other. Most powerful 3/4" impact in the industry. 6" Anvil. Maximum torque 1,250 ft.-lbs. Full power reverse. 3 position power regulator. 360 degree swivel inlet. | *$599.99 |
 | Ingersoll-Rand 2190Ti-6 1-Inch Titanium Pnuematic Impact Wrench with 6-Inch Extended Anvil
Brand: Ingersoll-Rand Model: IRT2190Ti-6 Part Number: IR 2190TI-6
This Ingersoll Rand air impact wrench features a 7-vane motor. Titanium hammercase is lightweight and durable. Ergonomic chainsaw handle and grip offers control and comfort in use. Includes 6in. anvil. U.S.A. Drive (in.): 1, Average Air Consumption (CFM): 12, CFM at Load: 58, Speed - No Load (RPM): 6,800, Blows Per Minute (BPM): 950, Max. Torque (ft.-lbs.): 1,650, Working Torque (ft.-lb.): 150 - 1,200, Standard Bolt Capacity (in.): 1 1/4 | *$627.95 |
 | Ingersoll Rand 244A 1/2-Inch Super Duty Air Impact Wrench
Brand: Ingersoll-Rand Model: IRT244A Part Number: IR244A
Drive (in.): 1/2, Average Air Consumption (CFM): 5.4, CFM at Load: 21, Speed - No Load (RPM): 7,000, Blows Per Minute (BMP): 1,300, Max. Torque (ft.-lbs.): 500, Working Torque (ft.-lb.): 40 - 350, Inlet Size (in.): 1/4, Min. Hose Size (in.): 3/8, Hammer Mechanism: Twin, Standard Bolt Capacity (in.): 5/16, Variable Speed: Yes | *$190.99 |
 | Ingersoll-Rand IRT285B-6 Heavy Duty 1-Inch Pneumatic Impact Wrench with 6-Inch Extended Anvil
Brand: Ingersoll-Rand Model: IRT285B-6 Part Number: IR 285B-6
This Ingersoll Rand air impact wrench delivers exceptional power, durability and operator convenience. Drive (in.): 1, Average Air Consumption (CFM): 10, CFM at Load: 37, Speed - No Load (RPM): 5,000, Blows Per Minute (BPM): 830, Max. Torque (ft.-lbs.): 1,450, Working Torque (ft.-lb.): 100 - 1,000, Inlet Size (in.): 1/2, Min. Hose Size (in.): 1/2, Standard Bolt Capacity (in.): 1 1/4, Variable Speed: Yes, Tool Length (in.): 20 | *$414.54 |
 | Ingersoll Rand 301 Standard Duty Multi-Purpose Air Angle Die Grinder
Brand: Ingersoll-Rand Model: IRT301 Part Number: 301
This Ingersoll Rand air right angle die grinder provides an excellent solution in tight spaces. It is an ideal choice for grinding, edge-breaking, deburring, porting and polishing applications. Air Consumption (CFM): 3, CFM at Load: 14, Speed (RPM): 20,000, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Collet Size (in.): 1/4, Side Handle: No | *$50.42 |
 | Ingersoll Rand 302A Heavy Duty Air Angle Die Grinder
Brand: Ingersoll-Rand Model: IRT302 Part Number: 302A
IR 302 Heavy Duty Air Angle Die Grinder When a straight tool isn`t practical for working in confined areas, this is the economical die grinder with a right angle head to use. It`s compact and designed well for grinding, porting, polishing, de-burring, and breaking sharp edges. Durable and long-lasting. All ball bearing construction. Precision-machined steel gears. Positive grip 1/4" capacity collet chuck. Self-locking throttle lever. | *$98.95 |
 | Ingersoll-Rand IRT308 Heavy Duty Air Die Grinder
Brand: Ingersoll-Rand Model: IRT308 Part Number: IR 308A
This Ingersoll Rand air die grinder features a durable design that makes it a great choice for porting, light weld grinding and breaking sharp edges. Air Consumption (CFM): 3, CFM at Load: 20, Speed (RPM): 25,000, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Collet Size (in.): 1/4, Side Handle: No | *$72.40 |
 | Ingersoll-Rand 3102 Super Duty Composite 1/4-Inch Angle Die Grinder
Brand: Ingersoll-Rand Model: IRT3102 Part Number: IR3102
This Ingersoll Rand composite angle die grinder features a lightweight, durable composite body and is an ideal choice for porting, weld braking, deburring, polishing and grinding applications. CFM at Load: 18, Speed (RPM): 20,000, Collet Size (in.): 1/4, Side Handle: No | *$111.50 |
 | Ingersoll-Rand 3108 Super-Duty 1/4-Inch Pneumatic Die Grinder
Brand: Ingersoll-Rand Model: IRT3108 Part Number: IR3108
This Ingersoll Rand die grinder features a lightweight, durable composite body with superior ergonomics and comfort. This set is ideal for porting, weld braking, deburring and grinding applications. Air Consumption (CFM): 3, CFM at Load: 18, Speed (RPM): 25,000, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Collet Size (in.): 1/4, Side Handle: No | *$78.95 |
 | Ingersoll Rand 311A 6-Inch Heavy-Duty Air Dual-Action Quiet Sander
Brand: Ingersoll-Rand Model: IRT311A Part Number: 311A
A built-in silencer muffles noise as you work with this economical dual action sander. It's a quality sander used for feather edging, metal preparation and finish work. And its dual action pad motion produces swirl-free finishes. Vibration-free Dependable performance Balanced ball bearing construction Adjustable built-in regulator for positive speed control Specifications: Free speed: 10,000 rpm Rated power: .25 hp Pad diameter: 6" (150 mm) Spindle size: 5/16" - 24 Vacuum ready: No Weight: 4.2 lbs. (1.91 kg) Average air consumption: 4 cfm, @ load 17 cfm Sound (pressure/power): 85.6/98.6 dBA Air inlet: 3/8" | *$51.99 |
 | Ingersoll Rand Dual Action Air Sander - 6in. Dia, 4 CFM, 10,000 RPM, Model# 311A
Brand: Ingersoll-Rand Model: IRT311A Part Number: IR 311A
This Ingersoll Rand dual action air sander features a built-in silencer that muffles noise as you work. It's an ideal choice for feather edging, metal preparation and finish work on body filler. Air Consumption (CFM): 4, CFM at Load: 17, Speed (RPM): 10,000, Pad Diameter (in.): 6, Random Orbital: No, Variable Speed: Yes, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No | *$46.14 |
 | Ingersoll Rand IRT315 Heavy Duty Air Twin Piston Straight Line Sander - 2-3/4-Inch x 17-1/2-Inch Pad
Brand: Ingersoll-Rand Model: IRT315 Part Number: 315
Twin pistons prevent stalling and provide you with smooth, reliable power. Long 2 3/4in. x 17 1/2in.. pad gives you accurate shaping and precise leveling of flat surfaces. 3000 reciprocating 1-inch strokes per minute save you time. Comfortable, balanced 2-handle design produces a smooth, vibration-free performance. Automatic stop trigger release. Quick action sandpaper clamps. Air Consumption (CFM): 8, CFM at Load: 9, Speed (RPM): 3,000, Pad Diameter (in.): 2 3/4 x 17 1/2, Spindle Size (in.): 16.8, Random Orbital: No, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Weight (lbs.): 6 1/4 | *$92.95 |
 | Ingersoll-Rand 327 3/8-Inch Heavy Duty High Speed Pnuematic Tire Grinder
Brand: Ingersoll-Rand Model: IRT327 Part Number: 327
With a free speed up to 22,000 rpm and powerful 1/2- hp motor, the IR327 will make quick work of patchwork and roughing up low areas for recapping, tire scuffing and cleaning tire moldings. Lever throttle for easy operation. Rear exhaust keeps air away from you and your work. | *$54.15 |
 | Ingersoll Rand 429 Heavy Duty Air Reciprocating Saw
Brand: Ingersoll-Rand Model: IRT429 Part Number: IR 4151
This Ingersoll Rand heavy-duty reciprocating saw cuts intricate shapes and tight radius curves on flat and curved surfaces. Cuts all types of aluminum, plastic, fiberglass and sheet metal. Typical Application: Cutting in all types of materials, Air Consumption (CFM): 8 Average and 15 CFM @ load, Strokes Per Minute (SPM): 10,000, Lock Off Throttle: Yes, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Blade Included: Yes, Case Included: No, Tool Weight (lbs.): 1.32, Tool Length (in.): 8 1/4, Includes (qty.): (6) Blades and (2) hex wrenches | *$78.95 |
 | Ingersoll-Rand IRT4429 Super Duty Pnuematic Reciprocation Saw
Brand: Ingersoll-Rand Model: IRT4429 Part Number: 4429
This Ingersoll Rand air reciprocating saw is ideal for cutting intricate shapes and light radius curves in a variety of materials. Typical Application: Cutting in all types of materials, Air Consumption (CFM): 7, Strokes Per Minute (SPM): 5,750, Lock Off Throttle: Yes, Adjustable Guide: Yes, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Blade Included: Yes, Case Included: No, Tool Weight (lbs.): 1.6, Tool Length (in.): 9 1/4, Includes (qty.): (6) Steel cutting blades | *$105.95 |
 | Ingersoll-Rand 7802SA Heavy Duty 20 Gauge Pneumatic Shear
Brand: Ingersoll-Rand Model: IRT7802SA Part Number: 7802SA
Cuts cold rolled steel up to 20 gauge. Cuts squares, angles and circles. Shears most types of plastics and all types of aluminum, tin and steel. | *$134.99 |
 | Ingersoll Rand R380-KL2 IQV 14.4-Volt 3/8-Inch Ratchet Wrench Kit
Brand: Ingersoll-Rand Model: R380-KL2 Part Number: R380-KL2 | *$356.65 |
 | Inland Wiz CG Stained Glass Grinder
Brand: Inland Craft
This grinder is more powerful than the Wizling!
Product Information
WizCGTM Glass Grinder: Stock no. 20030
(Contour-GTTM)
WizCGTM has more features for less money!
Key Features:
A powerful 30 oz.-in. torque motor that makes it the most powerful grinder in its class.
The same stable body design and work surface size found on the ImpulseTM and AeroTM grinders. You get over 13 more square inches of work area and the work surface is reversible!
Can be used with the RetroFitKitTMand converted to a disc grinder.
Can be used with the BevelerKitTM and converted into a beveler.
Lift off reservoir is easy to remove for quick cleaning.
WizCGTM comes with a 3/4" and 1/4" grinding bits, 3/4" standard BitSertTM 3/4", and 2-way on/off switch.
Accepts Inland's wire frame face shield support for use with our FaceShieldTM or MagnaShieldTM.
Many optional accessories and bits work on the WizCGTM.
Five Year Full Confidence Warranty
Product Uses:
The WizCGTM updates the PopTopTM WizTM for the 90's with a sleek body design, larger work surface and easy clean reservoir.
WizCGTM has more features and accepts more accessories than other grinders for the same price.
Easy to setup and use, the WizCGTM is a grinder that also can be a disc grinder or beveling machine.
Its size and design make the WizCGTM big enough to handle most grinding needs.
Product Specs:
Stock no. 20030
Master Case Quantity: 1
Construction: Injection molded plastic.
Size: 11" x 10" x 5.5"
For even more product information, read the User Guide. Voltage 115V 230/240V
RPM / UPM (idle) 3550 2970
Maximum Torque 30 oz.-in. 0.219 N-m
Frequency 60Hz 50Hz
Maximum Horse Power 1/11 HP 1/11 HP
Watts In 215 95 idle, 180 load
Watts Out (at peak torque) 55
Thermal Protection YES YES | *$109.99 |
 | Wizling Stained Glass Grinder
Brand: Inland Craft
WizlingCGTM gives you features at an affordable price!
Key Features
The most powerful grinder in its class.
The same size, body design, and work surface size found on the ImpulseTM and AeroTM
Reversible work surface for twice the life!
Lift off reservoir is easy to remove for quick cleaning.
Comes with a ¾" grinding head.
2-way on/off switch.
Accepts Inland's wire frame face shield support for use with our FaceShieldTM or MagnaShieldTM.
Works with many optional accessories and bits.
Five Year Full Confidence Warranty
French Language User Guide | *$92.99 |
 | Wizard IV Stained Glass Grinder
Brand: Inland Craft Model: 11560
The Wizard IVTM was designed for the professional glass artist but hobbyists looking for "the best" will also enjoy this workhorse machine.
Work Surface: 14 1/2" wide x 11 1/2" deep
Construction: High Impact ABS housing
Voltage: 115V
Maximum RPM: 3,550
Maximum Torque: 40 oz.-in.
Frequency: 60 Hz
Maximum Horse Power: 1/9 HP
Watts Out (Under Load): 183
Thermal Protection
Key Features
Huge, 14 ½" (36.8cm) x 11 ½" (29.2cm) work surface is 16% larger than closest competitor.
LiftOffTM reservoir makes cleanup fast and easy.
Reversible work surface saves you money down the road.
Includes 1" and ¼" grinding bits.
SecondStoryTM Work Surface (included) provides an elevated work surface for using the ¼" bit and other stacked bits.
FaceShieldTM with wire holder included standard with every machine.
Accepts all Inland grinder accessories and over 40 grinding bits.
Convenient covered accessory tray for bits, wrenches, lubricant and other supplies is built into reservoir.
Five Year Full Confidence Warranty | *$164.99 |
 | InstaWrench TW-100 Instant 12 Volt Automatic Impact Wrench
Brand: InstaJack Model: TW-100 Part Number: TW100
InstaWrench Instant 12 volt Automatic Impact Wrench includes (1) 12 volt DC InstaWrench and (2) 15-ampere replacement fuses. Features include 12 volt power to simply plug into cigarette lighter socket, double grip with two handles that are ergonomic for maximum control, Britelight illuminating the work area and interchangeable sockets that fit the majority of vehicles. | *$39.95 |
 | 3-Pc. Mortise Chisel Sharpening Set
Brand: Insty-Bit Part Number: 24727
Keep hollow mortising chisel edges sharp for fast and efficient cutting! brbr brDiamond-coated abrasives hone the hardest steel, including carbide. brCone shape puts the final edge on inside bevels. brSharpens mortising chisels up to 1/2" size. brComes with handle, 1/4" quick-change chuck, coarse and fine grit cones. brbr brCone shape puts the final edge on inside bevels. Sharpens mortising chisels up to 1/2" size. brbr brSet includes: Ergonomic handle for comfortable, slip-resistant gripping power. 1/4" quick-change chuck, coarse 220 grit cone for removing nicks and burrs, fine 600 grit cone for final honed cutting edge. | *$29.99 |
| | Interdynamics SF-275 Safari 12-Volt Air Compressor with Storage Case
Brand: Interdynamics Model: SF275 Part Number: SF275 | *$29.99 |
 | Interstate Pneumatics B300 1/4" FTP Standard Thumb Lever - w/o Tip Blow Gun
Brand: Interstate Model: B300 Part Number: B300
The Interstate Pneumatics classic air blow gun - essential equipment for every professional. Easy-to-handle for close-in or hard-to-reach. Heavy-gauge steel construction for long service-life. Interchangeable tips increase versatility of the gun. This rugged tool is the answer for removing dirt, grime, and grease combines water and air pressure to quickly clean, yet will not harm finishes also suitable for spraying a moderate volume of thin solutions such as mold release, graphite on sand cores, disinfectants, whitewash, lacquers, insulating compounds on electrical windings, metal preservatives, oil, etc.
Lever-activated for simultaneous valve action. Contour of body and lever fits hand for ease in handling. When you need to clear away debris or other material from your work area, blow it away with this powerful full force blow gun. This blow guns delivers the full line pressure of the air supply for maximum clearing ability. | *$5.99 |
 | Irwin 394001 Bolt-Grip 5 Pc. Base Set
Brand: Irwin Model: 394001 Part Number: 394001
Irwin 394001 Bolt-Grip 5 Pc. Base Set | *$16.00 |
 | Irwin 44202 Hand Brace Adjustable Wood Bits
Brand: Irwin Model: 44202 Part Number: 44202
Irwin 44202 Hand Brace Adjustable Wood BitsIrwin 44202 Hand Brace Adjustable Wood Bits Features:; Adjustable cutting blade bores a variety of hole sizes; Item 44002 cuts 19 standard hole sizes in increments of 1/8"; Item 44202 cuts 35 standard hole sizes in increments of 1/16"; Micro-dial screw can be turned to the desired boring diameter; Bits have taper square shank for use in a hand brace; Diameter: 7/8" - 3"; Overall Length: 8-1/8"; Adjustable cutting blade bores a variety of hole sizes; Micro-dial screw can be turned to the desired boring diameter; Bits have taper square shank for use in a hand brace; One-piece drop forged construction; For general purpose boring in all types of wood where a variety of larger size holes are required | *$26.30 |
 | Alphabet and Number Metal Stamp Set
Brand: JABETC
Our 36 piece steel metal alphabet letter number die stamp tool kit comes in a wooden storage case and is great for personalizing and identifying your stuff in steel, wood, leather etc. | *$39.99 |
 | Jac Pac J-6901-90 CO2 Brad Nailer Stapler
Brand: Jac Pac Part Number: J-6901-90
The JacPac CO2 power system allows you to use your regular pneumatic tools (from pinners to framers and roofing guns) without a compressor. The system hooks onto a belt for easy portibility. The CO2 cylinder delivers high powered pneumatics wherever you g | *$149.62 |
 | JDS AT2001 Disposable Pre-Filter (For 750)
Brand: JDS Model: 14002 Part Number: 14002
This disposable prefilter is for the JDS Air-Tech 750 and 350. The average life of this filter ranges from 6 to 8 weeks when used regularly. The actual life of the filter will depend on the amount of dust created each day. | *$12.99 |
 | JDS Company 14005 Charcoal Filter for JDS 750-ER
Brand: JDS Model: 14005 | *$42.99 |
 | JDS Company 14006 8-12 Air-Tech High Efficiency Air Filtration System
Brand: JDS Model: 14006 Part Number: 14006
The JDS Air-Tech 8-12 is the ultimate air cleaner for your shop. With two speeds this heavy-duty 1/3 hp motor produces a class-leading, 1,570 cfm unrestricted airflow and provides 800 cfm and 1250 cfm of filtered air. This will clean the air in a 35x 35x 10 shop in less than 10 minutes. The filtration system will remove 99 percent of dust particles as small as five microns and 91 percent of particles as small as one micron in size. A powerful blower motor will quietly circulate and filter the air in your room. No outside venting is required and existing room temperature is not affected. The JDS Air-Tech will operate most efficiently mounted to the ceiling. If a ceiling location is not convenient, a tabletop or shelf may be used. The more elevated the location, the less the air flow will be restricted. In larger areas requiring a high volume of air filtration, multiple units can be strategically placed. Our air handling experts can assist you in solving your specific problems. Changing the filters for the JDS Air-Tech systems is quick and easy. The prefilter and the secondary bag filter both slide in and out with ease. The disposable prefilter will need to be changed more frequently, but can be replaced with an optional washable electrostatic prefilter. The electrostatic prefilter does not need to be replaced, just occasionally washed out with a mild kitchen degreaser and water from a low pressure hose. The secondary bag filter is easily accessible through an access panel door on the side of the unit, and wont need to be changed as often as the prefilter. The final diffusing filter needs no cleaning and can be replaced with the optional charcoal filter. | *$529.99 |
 | JDS 750-ER 14022 3 Speed Air Filtration System with Remote and Electrostatic Pre-Filter
Brand: JDS Model: 750-ER Part Number: 14022
This new development from JDS carries with it all the great features of the model it replaces, and adds a new remote control system. The JDS 750ER is a high efficiency three stage air filtration system that removes the dangerous to breathe talc-fine dust particles that regular dust collectors cannot get. With an included electrostatic (washable) prefilter, use is easier than ever. The 750ER is powered by a heavy-duty motor that pulls 750 cubic feet of air through the filter each minute. From a whisper quiet 200 CFM to its full 750 CFM, the performance is great, with effective removal of 99 of 5 micron dust, bacteria, fungi and pollen particles in your shop. It also grabs as much as 80 of particles down to 1 micron size (1 micron equals 1 millionth of a meter). The system completely filters the air in a 30 x 30 x 8 shop once every 10 minutes. The longer the Air-Tech runs, the cleaner your shop air becomes. A unique slide-in/slide-out filter system, combined with well-placed access doors, lets you change filters quickly and easily, without any tools. While designed for ceiling installation, the Air-Tech 750ER can also be placed on tabletops or shelves. The 750ER measures 12" x 24" x 34" and weighs 62 pounds. It draws 300 watts. The new remote control offers three speeds, low, medium and high, and has four time settings so the 750ER shuts off automatically at one hour, two hours, three hours or four hours. | *$349.99 |
 | JDS 14003 Internal Bag Filter for 750-ER Air-Tech Air Filtration System
Brand: JDS Model: AT2003 Part Number: 14003
This internal bag filter is for all JDS Air-Tech 750 and 350 models. The average life of this filter is approximately 1-1/2 years, when used regularly. The actual life of the filter will depend on the amount of dust created each day. | *$47.99 |
 | JDS Company AT2006 5-Pocket Internal Bag Filter (For 8-12 and 10-16)
Brand: JDS Model: AT2006 Part Number: 14008
Maintaining your air filtration system is crucial. Medical studies show that breathing too much fine dust can cause bronchitis, emphysema, and lung cancer. The International Agency for Research on Cancer has classified wood dust as one of the worst carcinogens. The 5-pocket internal bag filter is a replacement filters for JDS models 8-12 and 10-16 that helps remove these carcinogens from the air you breathe. With easy access through panel on side of the unit, removal and installation is a breeze. And, if youre upgrading to the 5-pocket filter, itll need to be changed less often than the previous model. | *$59.95 |
 | JDS Company AT2007 Washable Electrostatic Pre-Filter (For 8-12 and 10-16)
Brand: JDS Model: AT2007 Part Number: 14009
This washable electrostatic prefilter is optional equipment for the JDS Air-Tech Models 8-12 and 10-16. It replaces the disposable prefilter on the front of the unit. A monthly washing will restore this filter to like-new condition. It has a 10 year warranty. | *$59.95 |
 | 2 HP Electric Hand Carry Portable Air Compressor Tank Size: 5.3 Gallon 2 HP Horizontal
Brand: Jenny Products Part Number: A2G246-HC5H
A2G246-HC5H Tank Size: 5.3 Gallon 2 HP Horizontal These Portable Air Compressors are offered in a 4.8 Gallon Tank that is vertical or a 5.3 Gallon Tank that is horizontal. They are lightweight, compact and extremely portable with cast iron cylinders which allow for an extended pump life, and single stage, direct coupled, oil lubricated pump. These Portable Hand Carry Air Compressors have aluminum heading for better heat dissipation, canister inlet filters with replaceable filter elements, a pressure relief safety valve, tanks that are able to be manually drained and they run on electric engines. All Jenny Hand Carry Units come with limited 1-year warranties, also included in each Jenny Air Compressor carton is Jenny's Ultimate Blue Compressor Pump Oil for your initial fill. Features: -Extremely portable -Start-Stop control -On/Off switch -Thermal overload protection with manual reset -Cast iron cylinder -Single stage, direct coupled, oil lubricated pump -Aluminum head -Jenny's Ultimate Blue Compressor Pump Oil for initial fill -Canister inlet filters, with replaceable filter elements -Forced ventilation cooling system -Heavy duty steel tank -6' power cord -Anti-vibration feet -Regulator and two gauges for line and tank pressure -Pressure relief safety valve -Manual tank drain -Special unloading valves to assist in motor/engine starting Specifications: -Motor: Electric -Horse Power: 2 HP -Tank Size: -4.8 Gallon -5.3 Gallon -Power Supply: 115 Volt -CFM @ 100 PSI: 4.0 CFM -CFM @ 125 PSI: 3.4 CFM -Weight: 63 lbs -Dimensions: -4.8 Gallon 2 HP 18'' H x 16'' W x 22'' D -5.3 Gallon 2 HP 33'' H x 17'' W x 20'' D 1 year Limited Warranty: -All compressors manufactured by Jenny are warranted to be free from defects in material and workmanship under normal use for a period of 2 years from the date or purchase by the original purchaser (initial user) -Liability is limited to repair or replacement of material found defective, free of charge F.O.B. plant. Motors and engines are war | *$252.99 |
 | JessEm Zip Slot Mortise Mill System
Brand: JessEm Part Number: 08100
The Zip Slot Mortise Mill features a uniquely designed drill bit and hardened guide bushing that is pressed into a bearing, simply use the guide bushing to guide the drill bit while you oscillate the bit back-and-forth with the lever system. Includes a 3/8" guide bushing with bearing, a special 3/8" drill bit, a stop collar, sample 3/8" x 1-1/4" hardwood tenons and detailed instructions. | *$111.99 |
 | Jet GH-1440W-1 Lathe With ACU-RITE 200S DRO And Collet Closer Installed 321548
Brand: Jet Part Number: 321548
Includes GH-1440W-1 Lathe with ACU-RITE 200S DRO and Collet Closer Installed - 321548, 6" 3-Jaw Direct Mount Chuck with Top Reversing Jaws, 8" 4-jaw chuck, 12" Face Plate, Four-Way Tool Post, Steady and Follow Rest, Micro-Carriage Bed Stop, Front removable chip tray, Spindle Jog Button, Foot Brake, Coolant System with Splash Guard, Metric Change Gear, Halogen Work Lamp, Centers and Headstock Center Sleeve, Threading Dial, Tool Box, Heavy-Duty Stand | *$9,999.00 |
 | JET 1220VS Mini Lathe
Brand: Jet Model: 1220VS Part Number: 708376VS
Includes 12" X 20" Variable Speed Wood Lathe - 708376VS | *$599.99 |
 | JET 22-44 PRO 22-Inch 3-Horsepower 1PH DRO Drum Sander with Table and Caster
Brand: Jet Model: 22-44 PRO Part Number: 649600
649600 Features: -22-44 Pro tables and casters. -3HP, 1Ph, DRO. -Assembly required. -Dimensions: 52'' H x 41'' W x 41'' D. | *$2,199.99 |
 | JET 22-44ODS Oscillating Drum Sander Kit with closed stand
Brand: Jet Model: 22-44ODS Part Number: 659006K
The Jet 659006K 22-44 OSC Oscillating Drum Sander has an exclusive oscillating feature. With the push of a button the 22-44 OSC sander can be operated as a simple sander or as an oscillating sander. When operating as a linear sander, the sander drum rotates as the conveyor feeds the workpiece through. When in the oscillating mode, in addition to the linear sanding operation, the sanding drum head oscillates from left to right and lowers heat build-up on the sanding belt to reduce loading and burning. Features: Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt "Trackers" dramatically reduce the need for manual belt adjustments Sealed and permanently lubricated drum ball bearings for longer life Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results What's In The Box: Jet 659006K 22-44 OSC Oscillating Drum Sander Closed Stand | *$1,999.99 |
 | JET 354165 JDP-15M 3/4-HP 15-Inch Bench Drill Press
Brand: Jet Model: 354165 Part Number: JDP-15M
The Jet 354165 JDP-15M 15-Inch Bench Mount Drill Press is perfect for workshops with limited workspace and is also extremely versatile. In addition to drillin perfectly perpendicular holes, its 16 speeds enable it to be used for non-drilling chores such as sanding, mortising, shaping, routing, plating, and more. Features: Hinged metal belt and pulley cover, coupled with quick adjustment motor mount, allows rapid spindle speed changes Spindle has ball bearing construction for long life 66mm quill assembly fits optional Jet JMA-582 mortising attachment 16 speeds lets the user match the speed to the application Crank operated quick release worktable height adjustment rotates + or - 45° for versatility "X" pattern mounting grooves in table allows the user to mount a fence when table is in reverse position Depth stop displays Inches/mm and features a quick set bolt for fast and accurate adjustments Adjustable tension spindle return spring is ideal for repetitive drilling of the same depth What's In The Box: Jet 354165 JDP-15M 15-Inch Bench Drill Press Built-in work light Drill chuck and key | *$459.99 |
 | Jet 354166 JDP-15MF 3/4-Horsepower 15-Inch Floor Model Drill Press
Brand: Jet Model: 354166 Part Number: 354166
Includes 3/4 HP 15" 16-Speed Floor Mount Drill Press - 354166, Drill Chuck, Chuck Key | *$525.00 |
 | JET JDP-17MF/354169 Drill Press
Brand: Jet Model: 354169 Part Number: 354169
Hinged metal belt and pulley cover provides easy access to the quick adjustment motor mount to allow rapid spindle changes; Rotating, 45 deg. tilting crank-operated worktable has quick release clamp for fast, accurate adjustments; 1/2" diameter external positive depth stop has a dual-nut locking feature for quick adjustments | *$545.29 |
 | JET 354170/JDP-20MF 20-Inch Floor Drill Press
Brand: Jet Model: 354170 Part Number: JDP-20MF
Floor drill press has a 1in. drilling capacity, a 1 1/2 HP, single-phase 115/230V motor and a hinged metal belt and pulley cover coupled with quick adjustment motor mount allow rapid changing of spindle speeds. Features adjustable tension spindle return spring and built-in work lamp (bulb not included). HP: 1 1/2, Volts: 115 / 230, Speeds (qty.): 12, Drilling Capacity (in.): 20, Chuck Size (in.): 3/4, Dimensions L x W x H (in.): 19 x 33 x 67 | *$1,249.00 |
 | Jet 414458 HVBS-56M 5-by-6-Inch 1/2 HP Horizontal/Vertical Bandsaw
Brand: Jet Model: 414458 Part Number: 414458
Horizontal/vertical band saw has a single-phase motor, heavy-duty 14-gauge stand, large-diameter wheels and built-in handle. Front legs have adjustable leveling pads. Ball bearing supported blade wheel with fully adjustable ball bearing blade guides. Cordless: No, HP: 1/2, Variable Speed: Yes, Cutting Capacity - Flat Stock (in. x in.): 5 x 6, Cutting Depth at 45deg (in.): 3, Cutting Depth at 90deg (in.): 5, Cutting Angles: 45 - 90, Blade Type: Carbon Steel, Blade Size L x W x Thickness (in.): 64 1/2 x 1/2 x .025, Stand Included: Yes, UL Listed: Yes | *$379.00 |
 | JET 414459 HVBS-7MW 7-Inch 3/4-HP Horizontal/Vertical Bandsaw, 115/230-Volt 1-Phase
Brand: Jet Model: 414459 Part Number: 414459
414459 This item features: -Blade Width: 3/4 in. -Blade Length: 93 in. -Blade Thickness: 0.0320 in. -Blade Speed: 85 sfpm, 130 sfpm, 180 sfpm, 285 sfpm. -Cutting Cap.: 7 in [Max], 4 1/2 in [Max]. -Cutting Height: 7 in @ 90 , 2 in @ 45 , 2 x 12 in. Rectangle. -Power Cap.: 3/4 hp [Max]. -Voltage: 115.00 VAC, 230.00 VAC. -Phase: Single. -Control Type: Lock-Off Trigger. -Drive Gearing: Worm Gearing. -Table/Plate Length: 10 in. -Table/Plate Width: 9 3/8 in. -Throat Depth: 7 in. -Power Source: Electric. -Type: Horizontal Band Saw. -Wt.: 318 lb. -Price is for 1 Each. Testing and approvals: -UL. | *$949.00 |
|
